1 config interface loopback
4 option ipaddr 127.0.0.1
5 option netmask 255.0.0.0
11 option ipaddr 192.168.1.1
12 option netmask 255.255.255.0
23 config globals globals
24 option ula_prefix auto
30 # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
34 option device rtl8366s
36 option ports "0 1 2 3 5t"
39 # Port 1 controls the GREEN configuration of LEDs for
40 # the switch and the section does not correspond to a real
43 # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
44 # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
45 # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
46 # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
47 # 14: Link (master); 15: separate register
49 option device rtl8366s
54 # Port 2 controls the ORANGE configuration of LEDs for
55 # the switch and the section does not correspond to a real
58 # See the key above for switch port 1 for the meaning of the
59 # 'led' setting below.
61 option device rtl8366s
66 # Port 5 controls the configuration of the WAN LED and the
67 # section does not correspond to a real switch port.
69 # To toggle the use of green or orange LEDs for the WAN port,
70 # see the LED setting for wndr3700:green:wan in /etc/config/system.
72 # See the key above for switch port 1 for the meaning of the
73 # 'led' setting below.
75 option device rtl8366s