[ar7] add fixed PHY patches from 2.6.27, refresh patches
[openwrt.git] / target / linux / ar7 / patches-2.6.30 / 910-cpmac_fixed_phy.patch
1 This is a hack to make cpmac work with the external switch on a DG834 v3; it
2 should also work on other similar routers. It has not been tested on hardware
3 with multiple cpmac devices or with no external switch. It may be safer to
4 move external_switch to pdata rather than trying to detect it, and to set
5 phy_mask correctly rather than moving the phy search loop.
6
7 --- a/drivers/net/cpmac.c
8 +++ b/drivers/net/cpmac.c
9 @@ -1096,7 +1096,7 @@ static int external_switch;
10  static int __devinit cpmac_probe(struct platform_device *pdev)
11  {
12         int rc, phy_id;
13 -       char *mdio_bus_id = "0";
14 +       char mdio_bus_id[BUS_ID_SIZE];
15         struct resource *mem;
16         struct cpmac_priv *priv;
17         struct net_device *dev;
18 @@ -1104,22 +1104,23 @@ static int __devinit cpmac_probe(struct 
19  
20         pdata = pdev->dev.platform_data;
21  
22 -       for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
23 -               if (!(pdata->phy_mask & (1 << phy_id)))
24 -                       continue;
25 -               if (!cpmac_mii->phy_map[phy_id])
26 -                       continue;
27 -               break;
28 +       if (external_switch || dumb_switch) {
29 +               strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
30 +               phy_id = pdev->id;
31 +       } else {
32 +               for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
33 +                       if (!(pdata->phy_mask & (1 << phy_id)))
34 +                               continue;
35 +                       if (!cpmac_mii->phy_map[phy_id])
36 +                               continue;
37 +                       strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
38 +                       break;
39 +               }
40         }
41  
42         if (phy_id == PHY_MAX_ADDR) {
43 -               if (external_switch || dumb_switch) {
44 -                       mdio_bus_id = 0; /* fixed phys bus */
45 -                       phy_id = pdev->id;
46 -               } else {
47 -                       dev_err(&pdev->dev, "no PHY present\n");
48 -                       return -ENODEV;
49 -               }
50 +               dev_err(&pdev->dev, "no PHY present\n");
51 +               return -ENODEV;
52         }
53  
54         dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
55 @@ -1160,8 +1161,10 @@ static int __devinit cpmac_probe(struct 
56         priv->msg_enable = netif_msg_init(debug_level, 0xff);
57         memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
58  
59 -       priv->phy = phy_connect(dev, dev_name(&cpmac_mii->phy_map[phy_id]->dev),
60 -                               &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
61 +       snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
62 +
63 +       priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
64 +                                               PHY_INTERFACE_MODE_MII);
65         if (IS_ERR(priv->phy)) {
66                 if (netif_msg_drv(priv))
67                         printk(KERN_ERR "%s: Could not attach to PHY\n",
68 @@ -1235,11 +1238,11 @@ int __devinit cpmac_init(void)
69  
70         cpmac_mii->reset(cpmac_mii);
71  
72 -       for (i = 0; i < 300000; i++)
73 +       for (i = 0; i < 300; i++)
74                 if ((mask = cpmac_read(cpmac_mii->priv, CPMAC_MDIO_ALIVE)))
75                         break;
76                 else
77 -                       cpu_relax();
78 +                       msleep(10);
79  
80         mask &= 0x7fffffff;
81         if (mask & (mask - 1)) {
82 @@ -1248,7 +1251,7 @@ int __devinit cpmac_init(void)
83         }
84  
85         cpmac_mii->phy_mask = ~(mask | 0x80000000);
86 -       snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "0");
87 +       snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
88  
89         res = mdiobus_register(cpmac_mii);
90         if (res)