enable start-stop-daemon by default, i want to use this to clean up a few init script...
[openwrt.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / compex.c
1 /*
2  *  $Id$
3  *
4  *  Compex boards
5  *
6  *  Copyright (C) 2007 OpenWrt.org
7  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
8  *
9  *  This program is free software; you can redistribute it and/or
10  *  modify it under the terms of the GNU General Public License
11  *  as published by the Free Software Foundation; either version 2
12  *  of the License, or (at your option) any later version.
13  *
14  *  This program is distributed in the hope that it will be useful,
15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *  GNU General Public License for more details.
18  *
19  *  You should have received a copy of the GNU General Public License
20  *  along with this program; if not, write to the
21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22  *  Boston, MA  02110-1301, USA.
23  *
24  */
25
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28
29 #include <asm/bootinfo.h>
30 #include <asm/gpio.h>
31
32 #include <asm/mach-adm5120/adm5120_board.h>
33 #include <asm/mach-adm5120/adm5120_platform.h>
34
35 static void switch_bank_gpio5(unsigned bank)
36 {
37         switch (bank) {
38         case 0:
39                 gpio_set_value(ADM5120_GPIO_PIN5, 0);
40                 break;
41         case 1:
42                 gpio_set_value(ADM5120_GPIO_PIN5, 1);
43                 break;
44         }
45 }
46
47 static void wp54_reset(void)
48 {
49         gpio_set_value(ADM5120_GPIO_PIN3, 0);
50 }
51
52 static struct mtd_partition wp54g_wrt_partitions[] = {
53         {
54                 .name   = "cfe",
55                 .offset = 0,
56                 .size   = 0x050000,
57                 .mask_flags = MTD_WRITEABLE,
58         } , {
59                 .name   = "trx",
60                 .offset = MTDPART_OFS_APPEND,
61                 .size   = 0x3A0000,
62         } , {
63                 .name   = "nvram",
64                 .offset = MTDPART_OFS_APPEND,
65                 .size   = 0x010000,
66         }
67 };
68
69 static struct platform_device *np2xg_devices[] __initdata = {
70         &adm5120_flash0_device,
71         &adm5120_usbc_device,
72 };
73
74 static struct platform_device *wp54_devices[] __initdata = {
75         &adm5120_flash0_device,
76 };
77
78 static void __init np2xg_setup(void)
79 {
80         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
81         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
82
83         /* setup data for flash0 device */
84         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
85
86         /* TODO: setup mac address */
87 }
88
89 static void __init wp54_setup(void)
90 {
91         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
92         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
93
94         gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
95         gpio_direction_output(ADM5120_GPIO_PIN3, 1);
96
97
98         /* setup data for flash0 device */
99         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
100
101         /* TODO: setup mac address */
102 }
103
104 static void __init wp54_wrt_setup(void)
105 {
106         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
107         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
108
109         gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
110         gpio_direction_output(ADM5120_GPIO_PIN3, 1);
111
112         /* setup data for flash0 device */
113         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
114         adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
115         adm5120_flash0_data.parts = wp54g_wrt_partitions;
116
117         /* TODO: setup mac address */
118 }
119
120 unsigned char np27g_vlans[6] __initdata = {
121         /* FIXME: untested */
122         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
123 };
124
125 unsigned char np28g_vlans[6] __initdata = {
126         /* FIXME: untested */
127         0x41, 0x42, 0x44, 0x48, 0x00, 0x00
128 };
129
130 unsigned char wp54_vlans[6] __initdata = {
131         /* FIXME: untested */
132         0x41, 0x42, 0x00, 0x00, 0x00, 0x00
133 };
134
135 static struct adm5120_board np27g_board __initdata = {
136         .mach_type      = MACH_ADM5120_NP27G,
137         .name           = "Compex NetPassage 27G",
138         .board_setup    = np2xg_setup,
139         .eth_num_ports  = 5,
140         .eth_vlans      = np27g_vlans,
141         .num_devices    = ARRAY_SIZE(np2xg_devices),
142         .devices        = np2xg_devices,
143 };
144
145 static struct adm5120_board np28g_board __initdata = {
146         .mach_type      = MACH_ADM5120_NP28G,
147         .name           = "Compex NetPassage 28G",
148         .board_setup    = np2xg_setup,
149         .eth_num_ports  = 4,
150         .eth_vlans      = np28g_vlans,
151         .num_devices    = ARRAY_SIZE(np2xg_devices),
152         .devices        = np2xg_devices,
153 };
154
155 static struct adm5120_board wp54ag_board __initdata = {
156         .mach_type      = MACH_ADM5120_WP54AG,
157         .name           = "Compex WP54AG",
158         .board_setup    = wp54_setup,
159         .board_reset    = wp54_reset,
160         .eth_num_ports  = 2,
161         .eth_vlans      = wp54_vlans,
162         .num_devices    = ARRAY_SIZE(wp54_devices),
163         .devices        = wp54_devices,
164 };
165
166 static struct adm5120_board wp54g_board __initdata = {
167         .mach_type      = MACH_ADM5120_WP54G,
168         .name           = "Compex WP54G",
169         .board_setup    = wp54_setup,
170         .board_reset    = wp54_reset,
171         .eth_num_ports  = 2,
172         .eth_vlans      = wp54_vlans,
173         .num_devices    = ARRAY_SIZE(wp54_devices),
174         .devices        = wp54_devices,
175 };
176
177 static struct adm5120_board wp54g_wrt_board __initdata = {
178         .mach_type      = MACH_ADM5120_WP54G,
179         .name           = "Compex WP54G-WRT",
180         .board_setup    = wp54_wrt_setup,
181         .board_reset    = wp54_reset,
182         .eth_num_ports  = 2,
183         .eth_vlans      = wp54_vlans,
184         .num_devices    = ARRAY_SIZE(wp54_devices),
185         .devices        = wp54_devices,
186 };
187
188 static struct adm5120_board wpp54ag_board __initdata = {
189         .mach_type      = MACH_ADM5120_WPP54AG,
190         .name           = "Compex WPP54AG",
191         .board_setup    = wp54_setup,
192         .board_reset    = wp54_reset,
193         .eth_num_ports  = 2,
194         .eth_vlans      = wp54_vlans,
195         .num_devices    = ARRAY_SIZE(wp54_devices),
196         .devices        = wp54_devices,
197 };
198
199 static struct adm5120_board wpp54g_board __initdata = {
200         .mach_type      = MACH_ADM5120_WPP54G,
201         .name           = "Compex WPP54G",
202         .board_setup    = wp54_setup,
203         .board_reset    = wp54_reset,
204         .eth_num_ports  = 2,
205         .eth_vlans      = wp54_vlans,
206         .num_devices    = ARRAY_SIZE(wp54_devices),
207         .devices        = wp54_devices,
208 };
209
210 static int __init register_boards(void)
211 {
212         adm5120_board_register(&np27g_board);
213         adm5120_board_register(&np28g_board);
214         adm5120_board_register(&wp54ag_board);
215         adm5120_board_register(&wp54g_board);
216         adm5120_board_register(&wp54g_wrt_board);
217         adm5120_board_register(&wpp54ag_board);
218         adm5120_board_register(&wpp54g_board);
219         return 0;
220 }
221
222 pure_initcall(register_boards);