1e82bd8d4db1f5ef87d84e741986e2bd7e667c3d
[openwrt.git] / target / linux / adm5120 / files / arch / mips / adm5120 / motorola / pmugw.c
1 /*
2  *  Motorola Powerline MU Gateway board
3  *
4  *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  *
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/init.h>
14 #include <linux/gpio.h>
15 #include <linux/irq.h>
16 #include <linux/etherdevice.h>
17
18 #include <asm/mips_machine.h>
19
20 #include <asm/mach-adm5120/adm5120_defs.h>
21 #include <asm/mach-adm5120/adm5120_platform.h>
22 #include <asm/mach-adm5120/adm5120_info.h>
23
24 #include <prom/admboot.h>
25
26 #define PMUGW_CONFIG_OFFSET     0x10000
27 #define PMUGW_CONFIG_SIZE       0x1000
28
29 #ifdef CONFIG_MTD_PARTITIONS
30 static struct mtd_partition pmugw_partitions[] = {
31         {
32                 .name   = "admboot",
33                 .offset = 0,
34                 .size   = 64*1024,
35                 .mask_flags = MTD_WRITEABLE,
36         } , {
37                 .name   = "boardcfg",
38                 .offset = MTDPART_OFS_APPEND,
39                 .size   = 64*1024,
40         } , {
41                 .name   = "firmware",
42                 .offset = MTDPART_OFS_APPEND,
43                 .size   = MTDPART_SIZ_FULL,
44         }
45 };
46 #endif /* CONFIG_MTD_PARTITIONS */
47
48 static u8 pmugw_vlans[6] __initdata = {
49         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
50 };
51
52 static __init void pmugw_setup_mac(void)
53 {
54         u8 mac_base[6];
55         int err;
56
57         err = admboot_get_mac_base(PMUGW_CONFIG_OFFSET,
58                                    PMUGW_CONFIG_SIZE, mac_base);
59
60         if ((err) || !is_valid_ether_addr(mac_base))
61                 random_ether_addr(mac_base);
62
63         adm5120_setup_eth_macs(mac_base);
64 }
65
66 static void switch_bank_gpio5(unsigned bank)
67 {
68         switch (bank) {
69         case 0:
70                 gpio_set_value(ADM5120_GPIO_PIN5, 0);
71                 break;
72         case 1:
73                 gpio_set_value(ADM5120_GPIO_PIN5, 1);
74                 break;
75         }
76 }
77
78 void __init pmugw_setup(void)
79 {
80         /* setup flash A20 line */
81         gpio_request(ADM5120_GPIO_PIN5, NULL);
82         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
83         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
84
85 #ifdef CONFIG_MTD_PARTITIONS
86         adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
87         adm5120_flash0_data.parts = pmugw_partitions;
88 #endif /* CONFIG_MTD_PARTITIONS */
89
90         adm5120_add_device_uart(1); /* ttyS0 */
91         adm5120_add_device_uart(0); /* ttyS1 */
92
93         adm5120_add_device_flash(0);
94
95         pmugw_setup_mac();
96         adm5120_add_device_switch(5, pmugw_vlans);
97 }
98
99 MIPS_MACHINE(MACH_ADM5120_PMUGW, "PMUGW", "Motorola Powerline MU Gateway",
100              pmugw_setup);