target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c

   1 /*
   2  *  $Id$
   3  *
   4  *  Edimax boards
   5  *
   6  *  Copyright (C) 2007-2008 OpenWrt.org
   7  *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or modify it
  10  *  under the terms of the GNU General Public License version 2 as published
  11  *  by the Free Software Foundation.
  12  *
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17
  18 #include <asm/bootinfo.h>
  19 #include <asm/gpio.h>
  20
  21 #include <adm5120_board.h>
  22 #include <adm5120_irq.h>
  23 #include <adm5120_platform.h>
  24
  25 static struct adm5120_pci_irq br61xx_pci_irqs[] __initdata = {
  26         PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
  27 };
  28
  29 static struct mtd_partition br61xx_partitions[] = {
  30         {
  31                 .name   = "admboot",
  32                 .offset = 0,
  33                 .size   = 32*1024,
  34                 .mask_flags = MTD_WRITEABLE,
  35         } , {
  36                 .name   = "config",
  37                 .offset = MTDPART_OFS_APPEND,
  38                 .size   = 32*1024,
  39         } , {
  40                 .name   = "firmware",
  41                 .offset = MTDPART_OFS_APPEND,
  42                 .size   = MTDPART_SIZ_FULL,
  43         }
  44 };
  45
  46 static struct platform_device *br6104k_devices[] __initdata = {
  47         &adm5120_flash0_device,
  48         &adm5120_hcd_device,
  49         &adm5120_buttons_device,
  50 };
  51
  52 static struct platform_device *br61x4wg_devices[] __initdata = {
  53         &adm5120_flash0_device,
  54 };
  55
  56 static void __init br61xx_setup(void) {
  57         /* setup data for flash0 device */
  58         adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
  59         adm5120_flash0_data.parts = br61xx_partitions;
  60
  61         adm5120_buttons_data.nbuttons = 1;
  62         adm5120_buttons[0].desc = "reset button";
  63         adm5120_buttons[0].gpio = ADM5120_GPIO_PIN2;
  64
  65         /* TODO: setup mac addresses, if possible */
  66 }
  67
  68 unsigned char br61xx_vlans[6] = {
  69         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
  70 };
  71
  72 /*--------------------------------------------------------------------------*/
  73
  74 ADM5120_BOARD_START(BR6104K, "Edimax BR-6104K/6104KP")
  75         .board_setup    = br61xx_setup,
  76         .eth_num_ports  = 5,
  77         .eth_vlans      = br61xx_vlans,
  78         .num_devices    = ARRAY_SIZE(br6104k_devices),
  79         .devices        = br6104k_devices,
  80 ADM5120_BOARD_END
  81
  82 ADM5120_BOARD_START(BR61x4WG, "Edimax BR-6104WG/6114WG")
  83         .board_setup    = br61xx_setup,
  84         .eth_num_ports  = 5,
  85         .eth_vlans      = br61xx_vlans,
  86         .num_devices    = ARRAY_SIZE(br61x4wg_devices),
  87         .devices        = br61x4wg_devices,
  88         .pci_nr_irqs    = ARRAY_SIZE(br61xx_pci_irqs),
  89         .pci_irq_map    = br61xx_pci_irqs,
  90 ADM5120_BOARD_END