target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c

   1 /*
   2  *  $Id$
   3  *
   4  *  Compex boards
   5  *
   6  *  Copyright (C) 2007 OpenWrt.org
   7  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or
  10  *  modify it under the terms of the GNU General Public License
  11  *  as published by the Free Software Foundation; either version 2
  12  *  of the License, or (at your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful,
  15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *  GNU General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License
  20  *  along with this program; if not, write to the
  21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  22  *  Boston, MA  02110-1301, USA.
  23  *
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28
  29 #include <asm/bootinfo.h>
  30 #include <asm/gpio.h>
  31
  32 #include <asm/mach-adm5120/adm5120_board.h>
  33 #include <asm/mach-adm5120/adm5120_platform.h>
  34
  35 static void switch_bank_gpio5(unsigned bank)
  36 {
  37         switch (bank) {
  38         case 0:
  39                 gpio_set_value(ADM5120_GPIO_PIN5, 0);
  40                 break;
  41         case 1:
  42                 gpio_set_value(ADM5120_GPIO_PIN5, 1);
  43                 break;
  44         }
  45 }
  46
  47 static void wp54_reset(void)
  48 {
  49         gpio_set_value(ADM5120_GPIO_PIN3, 0);
  50 }
  51
  52 static struct mtd_partition wp54g_wrt_partitions[] = {
  53         {
  54                 .name   = "cfe",
  55                 .offset = 0,
  56                 .size   = 0x050000,
  57                 .mask_flags = MTD_WRITEABLE,
  58         } , {
  59                 .name   = "trx",
  60                 .offset = MTDPART_OFS_APPEND,
  61                 .size   = 0x3A0000,
  62         } , {
  63                 .name   = "nvram",
  64                 .offset = MTDPART_OFS_APPEND,
  65                 .size   = 0x010000,
  66         }
  67 };
  68
  69 static struct platform_device *np2xg_devices[] __initdata = {
  70         &adm5120_flash0_device,
  71         &adm5120_hcd_device,
  72 };
  73
  74 static struct platform_device *wp54_devices[] __initdata = {
  75         &adm5120_flash0_device,
  76 };
  77
  78 static void __init np2xg_setup(void)
  79 {
  80         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
  81         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
  82
  83         /* setup data for flash0 device */
  84         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
  85
  86         /* TODO: setup mac address */
  87 }
  88
  89 static void __init wp54_setup(void)
  90 {
  91         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
  92         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
  93
  94         gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
  95         gpio_direction_output(ADM5120_GPIO_PIN3, 1);
  96
  97
  98         /* setup data for flash0 device */
  99         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
 100
 101         /* TODO: setup mac address */
 102 }
 103
 104 static void __init wp54_wrt_setup(void)
 105 {
 106         gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
 107         gpio_direction_output(ADM5120_GPIO_PIN5, 0);
 108
 109         gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
 110         gpio_direction_output(ADM5120_GPIO_PIN3, 1);
 111
 112         /* setup data for flash0 device */
 113         adm5120_flash0_data.switch_bank = switch_bank_gpio5;
 114         adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
 115         adm5120_flash0_data.parts = wp54g_wrt_partitions;
 116
 117         /* TODO: setup mac address */
 118 }
 119
 120 unsigned char np27g_vlans[6] __initdata = {
 121         /* FIXME: untested */
 122         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
 123 };
 124
 125 unsigned char np28g_vlans[6] __initdata = {
 126         0x50, 0x42, 0x44, 0x48, 0x00, 0x00
 127 };
 128
 129 unsigned char wp54_vlans[6] __initdata = {
 130         0x41, 0x42, 0x00, 0x00, 0x00, 0x00
 131 };
 132
 133 static struct adm5120_board np27g_board __initdata = {
 134         .mach_type      = MACH_ADM5120_NP27G,
 135         .name           = "Compex NetPassage 27G",
 136         .board_setup    = np2xg_setup,
 137         .eth_num_ports  = 5,
 138         .eth_vlans      = np27g_vlans,
 139         .num_devices    = ARRAY_SIZE(np2xg_devices),
 140         .devices        = np2xg_devices,
 141 };
 142
 143 static struct adm5120_board np28g_board __initdata = {
 144         .mach_type      = MACH_ADM5120_NP28G,
 145         .name           = "Compex NetPassage 28G",
 146         .board_setup    = np2xg_setup,
 147         .eth_num_ports  = 4,
 148         .eth_vlans      = np28g_vlans,
 149         .num_devices    = ARRAY_SIZE(np2xg_devices),
 150         .devices        = np2xg_devices,
 151 };
 152
 153 static struct adm5120_board wp54ag_board __initdata = {
 154         .mach_type      = MACH_ADM5120_WP54AG,
 155         .name           = "Compex WP54AG",
 156         .board_setup    = wp54_setup,
 157         .board_reset    = wp54_reset,
 158         .eth_num_ports  = 2,
 159         .eth_vlans      = wp54_vlans,
 160         .num_devices    = ARRAY_SIZE(wp54_devices),
 161         .devices        = wp54_devices,
 162 };
 163
 164 static struct adm5120_board wp54g_board __initdata = {
 165         .mach_type      = MACH_ADM5120_WP54G,
 166         .name           = "Compex WP54G",
 167         .board_setup    = wp54_setup,
 168         .board_reset    = wp54_reset,
 169         .eth_num_ports  = 2,
 170         .eth_vlans      = wp54_vlans,
 171         .num_devices    = ARRAY_SIZE(wp54_devices),
 172         .devices        = wp54_devices,
 173 };
 174
 175 static struct adm5120_board wp54g_wrt_board __initdata = {
 176         .mach_type      = MACH_ADM5120_WP54G,
 177         .name           = "Compex WP54G-WRT",
 178         .board_setup    = wp54_wrt_setup,
 179         .board_reset    = wp54_reset,
 180         .eth_num_ports  = 2,
 181         .eth_vlans      = wp54_vlans,
 182         .num_devices    = ARRAY_SIZE(wp54_devices),
 183         .devices        = wp54_devices,
 184 };
 185
 186 static struct adm5120_board wpp54ag_board __initdata = {
 187         .mach_type      = MACH_ADM5120_WPP54AG,
 188         .name           = "Compex WPP54AG",
 189         .board_setup    = wp54_setup,
 190         .board_reset    = wp54_reset,
 191         .eth_num_ports  = 2,
 192         .eth_vlans      = wp54_vlans,
 193         .num_devices    = ARRAY_SIZE(wp54_devices),
 194         .devices        = wp54_devices,
 195 };
 196
 197 static struct adm5120_board wpp54g_board __initdata = {
 198         .mach_type      = MACH_ADM5120_WPP54G,
 199         .name           = "Compex WPP54G",
 200         .board_setup    = wp54_setup,
 201         .board_reset    = wp54_reset,
 202         .eth_num_ports  = 2,
 203         .eth_vlans      = wp54_vlans,
 204         .num_devices    = ARRAY_SIZE(wp54_devices),
 205         .devices        = wp54_devices,
 206 };
 207
 208 static int __init register_boards(void)
 209 {
 210         adm5120_board_register(&np27g_board);
 211         adm5120_board_register(&np28g_board);
 212         adm5120_board_register(&wp54ag_board);
 213         adm5120_board_register(&wp54g_board);
 214         adm5120_board_register(&wp54g_wrt_board);
 215         adm5120_board_register(&wpp54ag_board);
 216         adm5120_board_register(&wpp54g_board);
 217         return 0;
 218 }
 219
 220 pure_initcall(register_boards);