6 * Copyright (C) 2007 OpenWrt.org
7 * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the
21 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22 * Boston, MA 02110-1301, USA.
26 #include <linux/kernel.h>
27 #include <linux/init.h>
29 #include <asm/bootinfo.h>
32 #include <adm5120_board.h>
33 #include <adm5120_platform.h>
34 #include <adm5120_irq.h>
36 static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
37 PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
40 static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
41 PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
42 PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
43 PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
44 PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
47 static struct mtd_partition wp54g_wrt_partitions[] = {
52 .mask_flags = MTD_WRITEABLE,
55 .offset = MTDPART_OFS_APPEND,
59 .offset = MTDPART_OFS_APPEND,
64 static struct platform_device *np2xg_devices[] __initdata = {
65 &adm5120_flash0_device,
69 static struct platform_device *wp54_devices[] __initdata = {
70 &adm5120_flash0_device,
73 unsigned char np27g_vlans[6] __initdata = {
75 0x41, 0x42, 0x44, 0x48, 0x50, 0x00
78 unsigned char np28g_vlans[6] __initdata = {
79 0x50, 0x42, 0x44, 0x48, 0x00, 0x00
82 unsigned char wp54_vlans[6] __initdata = {
83 0x41, 0x42, 0x00, 0x00, 0x00, 0x00
86 /*--------------------------------------------------------------------------*/
88 static void switch_bank_gpio5(unsigned bank)
92 gpio_set_value(ADM5120_GPIO_PIN5, 0);
95 gpio_set_value(ADM5120_GPIO_PIN5, 1);
100 static void wp54_reset(void)
102 gpio_set_value(ADM5120_GPIO_PIN3, 0);
105 static void np28g_reset(void)
107 gpio_set_value(ADM5120_GPIO_PIN4, 0);
110 static void __init np27g_setup(void)
112 gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
113 gpio_direction_output(ADM5120_GPIO_PIN5, 0);
115 /* setup data for flash0 device */
116 adm5120_flash0_data.switch_bank = switch_bank_gpio5;
118 /* TODO: setup mac address */
121 static void __init np28g_setup(void)
123 gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
124 gpio_direction_output(ADM5120_GPIO_PIN5, 0);
126 gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */
127 gpio_direction_output(ADM5120_GPIO_PIN4, 1);
129 /* setup data for flash0 device */
130 adm5120_flash0_data.switch_bank = switch_bank_gpio5;
132 /* TODO: setup mac address */
135 static void __init wp54_setup(void)
137 gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
138 gpio_direction_output(ADM5120_GPIO_PIN5, 0);
140 gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
141 gpio_direction_output(ADM5120_GPIO_PIN3, 1);
143 /* setup data for flash0 device */
144 adm5120_flash0_data.switch_bank = switch_bank_gpio5;
146 /* TODO: setup mac address */
149 static void __init wp54_wrt_setup(void)
151 gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
152 gpio_direction_output(ADM5120_GPIO_PIN5, 0);
154 gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
155 gpio_direction_output(ADM5120_GPIO_PIN3, 1);
157 /* setup data for flash0 device */
158 adm5120_flash0_data.switch_bank = switch_bank_gpio5;
159 adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
160 adm5120_flash0_data.parts = wp54g_wrt_partitions;
162 /* TODO: setup mac address */
165 /*--------------------------------------------------------------------------*/
167 ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G")
168 .board_setup = np27g_setup,
170 .eth_vlans = np27g_vlans,
171 .num_devices = ARRAY_SIZE(np2xg_devices),
172 .devices = np2xg_devices,
173 /* TODO: add PCI IRQ map */
176 ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G")
177 .board_setup = np28g_setup,
178 .board_reset = np28g_reset,
180 .eth_vlans = np28g_vlans,
181 .num_devices = ARRAY_SIZE(np2xg_devices),
182 .devices = np2xg_devices,
183 .pci_nr_irqs = ARRAY_SIZE(np28g_pci_irqs),
184 .pci_irq_map = np28g_pci_irqs,
187 ADM5120_BOARD_START(WP54AG, "Compex WP54AG")
188 .board_setup = wp54_setup,
189 .board_reset = wp54_reset,
191 .eth_vlans = wp54_vlans,
192 .num_devices = ARRAY_SIZE(wp54_devices),
193 .devices = wp54_devices,
194 .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
195 .pci_irq_map = wp54_pci_irqs,
198 ADM5120_BOARD_START(WP54G, "Compex WP54G")
199 .board_setup = wp54_setup,
200 .board_reset = wp54_reset,
202 .eth_vlans = wp54_vlans,
203 .num_devices = ARRAY_SIZE(wp54_devices),
204 .devices = wp54_devices,
205 .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
206 .pci_irq_map = wp54_pci_irqs,
209 ADM5120_BOARD_START(WP54G_WRT, "Compex WP54G-WRT")
210 .board_setup = wp54_wrt_setup,
211 .board_reset = wp54_reset,
213 .eth_vlans = wp54_vlans,
214 .num_devices = ARRAY_SIZE(wp54_devices),
215 .devices = wp54_devices,
216 .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
217 .pci_irq_map = wp54_pci_irqs,
220 ADM5120_BOARD_START(WPP54AG, "Compex WPP54AG")
221 .board_setup = wp54_setup,
222 .board_reset = wp54_reset,
224 .eth_vlans = wp54_vlans,
225 .num_devices = ARRAY_SIZE(wp54_devices),
226 .devices = wp54_devices,
227 .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
228 .pci_irq_map = wp54_pci_irqs,
231 ADM5120_BOARD_START(WPP54G, "Compex WPP54G")
232 .board_setup = wp54_setup,
233 .board_reset = wp54_reset,
235 .eth_vlans = wp54_vlans,
236 .num_devices = ARRAY_SIZE(wp54_devices),
237 .devices = wp54_devices,
238 .pci_nr_irqs = ARRAY_SIZE(wp54_pci_irqs),
239 .pci_irq_map = wp54_pci_irqs,