3 "Project-Id-Version: PACKAGE VERSION\n"
4 "Report-Msgid-Bugs-To: \n"
5 "POT-Creation-Date: 2009-05-26 19:03+0200\n"
6 "PO-Revision-Date: 2013-06-03 16:17+0200\n"
7 "Last-Translator: joao.f.vieira <joao.f.vieira@gmail.com>\n"
8 "Language-Team: LANGUAGE <LL@li.org>\n"
11 "Content-Type: text/plain; charset=UTF-8\n"
12 "Content-Transfer-Encoding: 8bit\n"
13 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
14 "X-Generator: Pootle 2.0.6\n"
16 msgid "Active MID announcements"
17 msgstr "Anuncios MID ativos"
19 msgid "Active OLSR nodes"
20 msgstr "Nós OLSR ativos"
23 msgid "Active host net announcements"
24 msgstr "Anuncios activos de hosts"
26 msgid "Advanced Settings"
27 msgstr "Definições Avançadas"
29 msgid "Allow gateways with NAT"
30 msgstr "Permitir gateways com NAT"
32 msgid "Allow the selection of an outgoing ipv4 gateway with NAT"
33 msgstr "Permitir a selecção de uma gateway IPv4 para saída com NAT"
35 msgid "Announce uplink"
36 msgstr "Anunciar uplink"
38 msgid "Announced network"
39 msgstr "Rede anunciada"
41 msgid "Both values must use the dotted decimal notation."
42 msgstr "Os valores tem de usar a dotação decimal."
44 msgid "Broadcast address"
45 msgstr "Endereço de broadcast"
59 msgid "Download Config"
60 msgstr "Descarregar Configuração"
69 "Enable SmartGateway. If it is disabled, then all other SmartGateway "
70 "parameters are ignored. Default is \"no\"."
72 "Ativar SmartGateway. Se estiver desativado, então todos os outros parâmetros "
73 "SmartGateway são ignorados. Por defeito é \"não\""
75 msgid "Enable this interface."
76 msgstr "Ativar esta interface."
81 msgid "Expected retransmission count"
82 msgstr "Contagem de retransmissões esperada"
88 "FIBMetric controls the metric value of the host-routes OLSRd sets. \"flat\" "
89 "means that the metric value is always 2. This is the preferred value because "
90 "it helps the linux kernel routing to clean up older routes. \"correct\" uses "
91 "the hopcount as the metric value. \"approx\" use the hopcount as the metric "
92 "value too, but does only update the hopcount if the nexthop changes too. "
93 "Default is \"flat\"."
96 msgid "Fisheye mechanism for TCs (checked means on). Default is \"on\""
102 msgid "General Settings"
105 msgid "General settings"
106 msgstr "Definições gerais"
111 msgid "HNA Announcements"
115 msgstr "Intervalo entre HNA"
117 msgid "HNA validity time"
118 msgstr "Validade de HNA"
123 msgid "Hello interval"
124 msgstr "Intervalo entre Hello"
126 msgid "Hello validity time"
127 msgstr "Validade de Hello"
142 "Hosts in a OLSR routed network can announce connecitivity to external "
143 "networks using HNA messages."
147 "Hysteresis for link sensing (only for hopcount metric). Hysteresis adds more "
148 "robustness to the link sensing but delays neighbor registration. Defaults is "
153 msgstr "Endereços IP"
156 "IP-version to use. If 6and4 is selected then one olsrd instance is started "
163 msgid "IPv4 broadcast"
164 msgstr "Endereço IPv4 de Broadcast"
167 "IPv4 broadcast address for outgoing OLSR packets. One useful example would "
168 "be 255.255.255.255. Default is \"0.0.0.0\", which triggers the usage of the "
169 "interface broadcast IP."
176 "IPv4 src address for outgoing OLSR packages. Default is \"0.0.0.0\", which "
177 "triggers usage of the interface IP."
183 msgid "IPv6 multicast"
184 msgstr "Multicast IPv6"
187 "IPv6 multicast address. Default is \"FF02::6D\", the manet-router linklocal "
192 "IPv6 network must be given in full notation, prefix must be in CIDR notation."
194 "A rede IPv6 deve ser fornecido em dotação completa, o prefixo deve estar na "
201 "IPv6 src prefix. OLSRd will choose one of the interface IPs which matches "
202 "the prefix of this parameter. Default is \"0::/0\", which triggers the usage "
203 "of a not-linklocal interface IP."
206 msgid "IPv6-Prefix of the uplink"
210 "If the route to the current gateway is to be changed, the ETX value of this "
211 "gateway is multiplied with this value before it is compared to the new one. "
212 "The parameter can be a value between 0.1 and 1.0, but should be close to 1.0 "
213 "if changed.<br /><b>WARNING:</b> This parameter should not be used together "
214 "with the etx_ffeth metric!<br />Defaults to \"1.0\"."
218 "If this Node uses NAT for connections to the internet. Default is \"yes\"."
225 "Interface Mode is used to prevent unnecessary packet forwarding on switched "
226 "ethernet interfaces. valid Modes are \"mesh\" and \"ether\". Default is "
229 "O Modo de Interface é usado para para prevenir encaminhamentos "
230 "desnecessários de pacotes em interfaces switched ethernet. Os Modos válidos "
231 "são \"mesh\" e \"ether\". Por defeito é \"mesh\"."
236 msgid "Interfaces Defaults"
237 msgstr "Predefinições das Interfaces"
239 msgid "Internet protocol"
240 msgstr "Protocolo de Internet"
243 "Interval to poll network interfaces for configuration changes (in seconds). "
244 "Default is \"2.5\"."
247 msgid "Known OLSR routes"
248 msgstr "Rotas OLSR conhecidas"
254 msgstr "Envelhecimento LQ"
257 msgstr "Algoritmo LQ"
267 msgstr "Ultimo salto"
275 msgid "Link Quality Settings"
276 msgstr "Definições de Qualidade do Link"
279 "Link quality aging factor (only for lq level 2). Tuning parameter for "
280 "etx_float and etx_fpm, smaller values mean slower changes of ETX value. "
281 "(allowed values are between 0.01 and 1.0)"
285 "Link quality algorithm (only for lq level 2).<br /><b>etx_float</b>: "
286 "floating point ETX with exponential aging<br /><b>etx_fpm</b> : same as "
287 "etx_float, but with integer arithmetic<br /><b>etx_ff</b> : ETX freifunk, an "
288 "etx variant which use all OLSR traffic (instead of only hellos) for ETX "
289 "calculation<br /><b>etx_ffeth</b>: incompatible variant of etx_ff that "
290 "allows ethernet links with ETX 0.1.<br />Defaults to \"etx_ff\""
294 "Link quality level switch between hopcount and cost-based (mostly ETX) "
295 "routing.<br /><b>0</b> = do not use link quality<br /><b>2</b> = use link "
296 "quality for MPR selection and routing<br />Default is \"2\""
299 msgid "LinkQuality Multiplicator"
302 msgid "Links per node (average)"
308 msgid "Local interface IP"
309 msgstr "Endereço IP do interface local"
315 msgstr "Intervalo de MID"
317 msgid "MID validity time"
318 msgstr "Validade de MID"
324 msgstr "IP Principal"
327 "Make sure that OLSRd is running, the \"txtinfo\" plugin is loaded, "
328 "configured on port 2006 and accepts connections from \"127.0.0.1\"."
330 "Certifique-se que o processo olsrd está em execução, que o plugin \"txtinfo"
331 "\" está carregado e configurado para a porta 2006 e que aceita ligações a "
332 "partir de \"127.0.0.1\"."
341 "Multiply routes with the factor given here. Allowed values are between 0.01 "
342 "and 1. It is only used when LQ-Level is greater than 0. Examples:<br /"
343 ">reduce LQ to 192.168.0.1 by half: 192.168.0.1 0.5<br />reduce LQ to all "
344 "nodes on this interface by 20%: default 0.8"
347 msgid "NAT threshold"
357 msgstr "Endereço IP do Vizinho"
363 msgstr "Máscara de rede"
368 msgid "Network address"
369 msgstr "Endereço de rede"
371 msgid "Nic changes poll interval"
380 msgid "OLSR - Display Options"
383 msgid "OLSR - HNA-Announcements"
384 msgstr "OLSR - Anuncios HNA4"
386 msgid "OLSR - Plugins"
387 msgstr "OLSR - Plugins"
390 msgstr "Servidor OLSR"
392 msgid "OLSR Daemon - Interface"
395 msgid "OLSR connections"
396 msgstr "OLSR - Ligações"
399 msgstr "Gateway OLSR"
408 msgid "Overview of currently active OLSR host net announcements"
409 msgstr "Resumo de anuncios activos de hosts"
411 msgid "Overview of currently established OLSR connections"
412 msgstr "Resumo das ligações OLSR actualmente estabelecidas"
414 msgid "Overview of currently known OLSR nodes"
415 msgstr "Resumo dos nós OLSR conhecidos"
417 msgid "Overview of currently known routes to other OLSR nodes"
418 msgstr "Resumo das rotas conhecidas para outros nós OLSR"
420 msgid "Overview of interfaces where OLSR is running"
423 msgid "Overview of known multiple interface announcements"
424 msgstr "Resumo de anuncios de nós com multiplos interfaces activos"
426 msgid "Overview of smart gateways in this network"
429 msgid "Plugin configuration"
430 msgstr "Configuração de Plugin"
435 msgid "Polling rate for OLSR sockets in seconds. Default is 0.05."
451 "Resolve hostnames on status pages. It is generally safe to allow this, but "
452 "if you use public IPs and have unstable DNS-Setup then those pages will load "
453 "really slow. In this case disable it here."
459 msgid "Secondary OLSR interfaces"
460 msgstr "Interfaces OLSR secundários"
463 "Sets the main IP (originator ip) of the router. This IP will NEVER change "
464 "during the uptime of olsrd. Default is 0.0.0.0, which triggers usage of the "
465 "IP of the first interface."
471 msgid "SmartGW announcements"
474 msgid "SmartGateway is not configured on this system."
477 msgid "Source address"
478 msgstr "Endereço de origem"
481 "Specifies the speed of the uplink in kilobits/s. First parameter is "
482 "upstream, second parameter is downstream. Default is \"128 1024\"."
485 msgid "Speed of the uplink"
486 msgstr "Velocidade do uplink"
494 msgid "Success rate of packages received from the neighbour"
497 msgid "Success rate of packages sent to the neighbour"
504 msgstr "Intervalo de TC"
506 msgid "TC validity time"
507 msgstr "Validade de TC"
513 "The OLSR daemon is an implementation of the Optimized Link State Routing "
514 "protocol. As such it allows mesh routing for any network equipment. It runs "
515 "on any wifi card that supports ad-hoc mode and of course on any ethernet "
516 "device. Visit <a href='http://www.olsr.org'>olsrd.org</a> for help and "
521 "The fixed willingness to use. If not set willingness will be calculated "
522 "dynamically based on battery/power status. Default is \"3\"."
525 msgid "The interface OLSRd should serve."
529 "The port OLSR uses. This should usually stay at the IANA assigned port 698. "
530 "It can have a value between 1 and 65535."
534 "This can be used to signal the external IPv6 prefix of the uplink to the "
535 "clients. This might allow a client to change it's local IPv6 address to use "
536 "the IPv6 gateway without any kind of address translation. The maximum prefix "
537 "length is 64 bits. Default is \"::/0\" (no prefix)."
540 msgid "Timing and Validity"
547 "Type of service value for the IP header of control traffic. Default is \"16"
551 msgid "Unable to connect to the OLSR daemon!"
552 msgstr "Não foi possivel ligar ao servidor OLSR!"
557 msgid "Uplink uses NAT"
558 msgstr "O uplink usa NAT"
560 msgid "Use hysteresis"
561 msgstr "Usar histerese"
570 "Warning: kmod-ipip is not installed. Without kmod-ipip SmartGateway will not "
571 "work, please install it."
578 "When multiple links exist between hosts the weight of interface is used to "
579 "determine the link to use. Normally the weight is automatically calculated "
580 "by olsrd based on the characteristics of the interface, but here you can "
581 "specify a fixed value. Olsrd will choose links with the lowest value.<br /"
582 "><b>Note:</b> Interface weight is used only when LinkQualityLevel is set to "
583 "0. For any other value of LinkQualityLevel, the interface ETX value is used "
588 "Which kind of uplink is exported to the other mesh nodes. An uplink is "
589 "detected by looking for a local HNA of 0.0.0.0/0, ::ffff:0:0/96 or 2000::/3. "
590 "Default setting is \"both\"."
594 msgstr "Disponibilidade"