2 append DRIVERS "atheros"
7 local adhoc ahdemo sta ap monitor
9 config_get vifs "$device" vifs
12 config_get ifname "$vif" ifname
13 config_set "$vif" ifname "${ifname:-ath}"
15 config_get mode "$vif" mode
17 adhoc|ahdemo|sta|ap|monitor)
21 config_get ssid "$vif" ssid
22 [ -z "$ssid" ] && continue
24 config_set "$vif" wds 1
25 config_set "$vif" mode sta
28 ${addr:+append $mode "$vif"}
30 *) echo "$device($vif): Invalid mode, ignored."; continue;;
34 case "${adhoc:+1}:${sta:+1}:${ap:+1}" in
35 # valid mode combinations
38 :1:1)config_set "$device" nosbeacon 1;; # AP+STA, can't use beacon timers for STA
42 *) echo "$device: Invalid mode combination in config"; return 1;;
45 config_set "$device" vifs "${sta:+$sta }${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${wds:+$wds }${monitor:+$monitor}"
52 set_wifi_down "$device"
57 grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
58 [ -f "/var/run/wifi-${dev}.pid" ] &&
59 kill "$(cat "/var/run/wifi-${dev}.pid")"
62 wlanconfig "$dev" destroy
71 config_get regdomain "$device" regdomain
72 [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain
74 config_get country "$device" country
75 [ -z "$country" ] && country="0"
76 echo "$country" > /proc/sys/dev/$device/countrycode
78 config_get_bool outdoor "$device" outdoor "0"
79 echo "$outdoor" > /proc/sys/dev/$device/outdoor
81 config_get channel "$device" channel
82 config_get vifs "$device" vifs
83 config_get txpower "$device" txpower
85 [ auto = "$channel" ] && channel=0
87 config_get_bool antdiv "$device" diversity
88 config_get antrx "$device" rxantenna
89 config_get anttx "$device" txantenna
90 config_get_bool softled "$device" softled
91 config_get antenna "$device" antenna
93 devname="$(cat /proc/sys/dev/$device/dev_name)"
97 NanoStation2) antgpio=7; invert=1;;
98 NanoStation5) antgpio=1; invert=1;;
99 "NanoStation Loco2") antgpio=2;;
102 horizontal) antdiv=0; anttx=1; antrx=1;;
103 vertical) antdiv=0; anttx=2; antrx=2;;
104 *) antdiv=1; anttx=0; antrx=0;;
108 if [ -n "$invert" ]; then
115 if [ -n "$antgpio" ]; then
123 horizontal) gpioval=0;;
129 external) antdiv=0; antrx=1; anttx=1; gpioval=1;;
130 horizontal) antdiv=0; antrx=1; anttx=1; gpioval=0;;
131 vertical) antdiv=0; antrx=2; anttx=2; gpioval=0;;
132 auto) antdiv=1; antrx=0; anttx=0; gpioval=0;;
137 [ -x "$(which gpioctl 2>/dev/null)" ] || antenna=
138 gpioctl "dirout" "$antgpio" >/dev/null 2>&1
141 gpioctl "$_clear" "$antgpio" >/dev/null 2>&1
144 gpioctl "$_set" "$antgpio" >/dev/null 2>&1
149 [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&-
150 [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&-
151 [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&-
152 [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&-
154 config_get distance "$device" distance
155 [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&-
158 local start_hostapd= vif_txpower= nosbeacon=
159 config_get ifname "$vif" ifname
160 config_get enc "$vif" encryption
161 config_get eap_type "$vif" eap_type
162 config_get mode "$vif" mode
165 sta) config_get_bool nosbeacon "$device" nosbeacon;;
166 adhoc) config_get_bool nosbeacon "$vif" sw_merge 1;;
169 [ "$nosbeacon" = 1 ] || nosbeacon=""
170 ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon})
172 echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2
175 config_set "$vif" ifname "$ifname"
177 config_get hwmode "$device" hwmode
178 [ -z "$hwmode" ] && config_get hwmode "$device" mode
184 *g) hwmode=11g; pureg=1;;
192 iwpriv "$ifname" mode "$hwmode"
193 iwpriv "$ifname" pureg "$pureg"
195 iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
197 config_get_bool hidden "$vif" hidden 0
198 iwpriv "$ifname" hide_ssid "$hidden"
200 config_get ff "$vif" ff
201 if [ -n "$ff" ]; then
202 iwpriv "$ifname" ff "$ff"
205 config_get wds "$vif" wds
207 1|on|enabled) wds=1;;
210 iwpriv "$ifname" wds "$wds" >/dev/null 2>&1
212 [ "$mode" = ap -a "$wds" = 1 ] && {
213 config_get_bool wdssep "$vif" wdssep 1
214 [ -n "$wdssep" ] && iwpriv "$ifname" wdssep "$wdssep"
220 *open*) iwpriv "$ifname" authmode 1;;
221 *) iwpriv "$ifname" authmode 2;;
223 for idx in 1 2 3 4; do
224 config_get key "$vif" "key${idx}"
225 iwconfig "$ifname" enc "[$idx]" "${key:-off}"
227 config_get key "$vif" key
230 [1234]) iwconfig "$ifname" enc "[$key]";;
231 *) iwconfig "$ifname" enc "$key";;
236 config_get key "$vif" key
242 config_get addr "$vif" bssid
244 iwconfig "$ifname" ap "$addr"
249 config_get_bool uapsd "$vif" uapsd 0
250 iwpriv "$ifname" uapsd "$uapsd"
252 config_get_bool bgscan "$vif" bgscan
253 [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan"
255 config_get rate "$vif" rate
256 [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}"
258 config_get mcast_rate "$vif" mcast_rate
259 [ -n "$mcast_rate" ] && iwpriv "$ifname" mcast_rate "${mcast_rate%%.*}"
261 config_get frag "$vif" frag
262 [ -n "$frag" ] && iwconfig "$ifname" frag "${frag%%.*}"
264 config_get rts "$vif" rts
265 [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}"
267 config_get_bool comp "$vif" compression 0
268 iwpriv "$ifname" compression "$comp" >/dev/null 2>&1
270 config_get_bool minrate "$vif" minrate
271 [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate"
273 config_get_bool maxrate "$vif" maxrate
274 [ -n "$maxrate" ] && iwpriv "$ifname" maxrate "$maxrate"
276 config_get_bool burst "$vif" bursting
277 [ -n "$burst" ] && iwpriv "$ifname" burst "$burst"
279 config_get_bool wmm "$vif" wmm
280 [ -n "$wmm" ] && iwpriv "$ifname" wmm "$wmm"
282 config_get_bool xr "$vif" xr
283 [ -n "$xr" ] && iwpriv "$ifname" xr "$xr"
285 config_get_bool ar "$vif" ar
286 [ -n "$ar" ] && iwpriv "$ifname" ar "$ar"
288 config_get_bool beacon_power "$vif" beacon_power
289 [ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power"
291 config_get_bool doth "$vif" doth 0
292 [ -n "$doth" ] && iwpriv "$ifname" doth "$doth"
294 config_get_bool probereq "$vif" probereq
295 [ -n "$probereq" ] && iwpriv "$ifname" probereq "$probereq"
297 config_get maclist "$vif" maclist
298 [ -n "$maclist" ] && {
300 iwpriv "$ifname" maccmd 3
301 for mac in $maclist; do
302 iwpriv "$ifname" addmac "$mac"
306 config_get macpolicy "$vif" macpolicy
309 iwpriv "$ifname" maccmd 1
312 iwpriv "$ifname" maccmd 2
315 # default deny policy if mac list exists
316 [ -n "$maclist" ] && iwpriv "$ifname" maccmd 2
320 ifconfig "$ifname" up
323 net_cfg="$(find_net_config "$vif")"
324 [ -z "$net_cfg" ] || {
325 bridge="$(bridge_interface "$net_cfg")"
326 config_set "$vif" bridge "$bridge"
327 start_net "$ifname" "$net_cfg"
330 config_get ssid "$vif" ssid
332 iwconfig "$ifname" essid on
333 iwconfig "$ifname" essid "$ssid"
336 set_wifi_up "$vif" "$ifname"
338 # TXPower settings only work if device is up already
339 # while atheros hardware theoretically is capable of per-vif (even per-packet) txpower
340 # adjustment it does not work with the current atheros hal/madwifi driver
342 config_get vif_txpower "$vif" txpower
343 # use vif_txpower (from wifi-iface) instead of txpower (from wifi-device) if
344 # the latter doesn't exist
345 txpower="${txpower:-$vif_txpower}"
346 [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
350 config_get_bool isolate "$vif" isolate 0
351 iwpriv "$ifname" ap_bridge "$((isolate^1))"
353 if [ -n "$start_hostapd" ] && eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
354 hostapd_setup_vif "$vif" madwifi || {
355 echo "enable_atheros($device): Failed to set up hostapd for interface $ifname" >&2
356 # make sure this wifi interface won't accidentally stay open without encryption
357 ifconfig "$ifname" down
358 wlanconfig "$ifname" destroy
364 if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
365 wpa_supplicant_setup_vif "$vif" madwifi || {
366 echo "enable_atheros($device): Failed to set up wpa_supplicant for interface $ifname" >&2
367 ifconfig "$ifname" down
368 wlanconfig "$ifname" destroy
381 for dev in $(ls -d wifi* 2>&-); do
382 config_get type "$dev" type
383 devname="$(cat /proc/sys/dev/$dev/dev_name)"
387 # Ubiquiti NanoStation Loco2 features
388 option antenna vertical # (horizontal|vertical)
393 # Ubiquiti NanoStation Loco5 features
394 option antenna auto # (auto|horizontal|vertical)
399 # Ubiquiti NanoStation features
400 option antenna auto # (auto|horizontal|vertical|external)
404 [ "$type" = atheros ] && continue
406 config wifi-device $dev
410 # REMOVE THIS LINE TO ENABLE WIFI:
418 option encryption none