package/linux/kernel-source/drivers/net/diag/diag_led.c

   1 // replacement diag module
   2 // (c) 2004 openwrt
   3 // mbm at alt dot org
   4 //
   5 // initial release 2004/03/28
   6 //
   7 // 2004/08/26 asus & buffalo support added
   8 // 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
   9
  10 #include <linux/module.h>
  11 #include <linux/init.h>
  12 #include <linux/kernel.h>
  13 #include <linux/sysctl.h>
  14 #include <asm/io.h>
  15 #include <typedefs.h>
  16 #include <bcm4710.h>
  17 #include <sbutils.h>
  18
  19 extern char * nvram_get(const char *name);
  20 static void *sbh;
  21
  22 // v2.x - - - - -
  23 #define DIAG_GPIO (1<<1)
  24 #define DMZ_GPIO  (1<<7)
  25
  26 static void set_gpio(uint32 mask, uint32 value) {
  27         sb_gpiocontrol(sbh,mask,0);
  28         sb_gpioouten(sbh,mask,mask);
  29         sb_gpioout(sbh,mask,value);
  30 }
  31
  32 static void v2_set_diag(u8 state) {
  33         set_gpio(DIAG_GPIO,state);
  34 }
  35 static void v2_set_dmz(u8 state) {
  36         set_gpio(DMZ_GPIO,state);
  37 }
  38
  39 // v1.x - - - - -
  40 #define LED_DIAG   0x13
  41 #define LED_DMZ    0x12
  42
  43 static void v1_set_diag(u8 state) {
  44         if (!state) {
  45                 *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
  46         } else {
  47                 *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
  48         }
  49 }
  50 static void v1_set_dmz(u8 state) {
  51         if (!state) {
  52                 *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
  53         } else {
  54                 *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
  55         }
  56 }
  57
  58 // - - - - -
  59 static void ignore(u8 ignored) {};
  60
  61 // - - - - -
  62 #define BIT_DMZ         0x01
  63 #define BIT_DIAG        0x04
  64
  65 void (*set_diag)(u8 state);
  66 void (*set_dmz)(u8 state);
  67
  68 static unsigned int diag = 0;
  69
  70 static void diag_change()
  71 {
  72         //printk(KERN_INFO "led -> %02x\n",diag);
  73
  74         set_diag(0xFF); // off
  75         set_dmz(0xFF); // off
  76
  77         if(diag & BIT_DIAG)
  78                 set_diag(0x00); // on
  79         if(diag & BIT_DMZ)
  80                 set_dmz(0x00); // on
  81 }
  82
  83 static int proc_diag(ctl_table *table, int write, struct file *filp,
  84                 void *buffer, size_t *lenp)
  85 {
  86         int r;
  87         r = proc_dointvec(table, write, filp, buffer, lenp);
  88         if (write && !r) {
  89                 diag_change();
  90         }
  91         return r;
  92 }
  93
  94 // - - - - -
  95 static unsigned char reset_gpio = 0;
  96 static unsigned char reset_polarity = 0;
  97 static unsigned int reset = 0;
  98
  99 static int proc_reset(ctl_table *table, int write, struct file *filp,
 100                 void *buffer, size_t *lenp)
 101 {
 102
 103         if (reset_gpio) {
 104                 sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
 105                 sb_gpioouten(sbh,reset_gpio,0);
 106                 reset=!(sb_gpioin(sbh)&reset_gpio);
 107
 108                 if (reset_polarity) reset=!reset;
 109         } else {
 110                 reset=0;
 111         }
 112
 113         return proc_dointvec(table, write, filp, buffer, lenp);
 114 }
 115
 116 // - - - - -
 117 static struct ctl_table_header *diag_sysctl_header;
 118
 119 static ctl_table sys_diag[] = {
 120          {
 121            ctl_name: 2000,
 122            procname: "diag",
 123            data: &diag,
 124            maxlen: sizeof(diag),
 125            mode: 0644,
 126            proc_handler: proc_diag
 127          },
 128          {
 129            ctl_name: 2001,
 130            procname: "reset",
 131            data: &reset,
 132            maxlen: sizeof(reset),
 133            mode: 0444,
 134            proc_handler: proc_reset
 135          },
 136          { 0 }
 137 };
 138
 139 static int __init diag_init()
 140 {
 141         char *buf;
 142         u32 board_type;
 143         sbh = sb_kattach();
 144         sb_gpiosetcore(sbh);
 145
 146         board_type = sb_boardtype(sbh);
 147         printk(KERN_INFO "diag boardtype: %08x\n",board_type);
 148
 149         set_diag=ignore;
 150         set_dmz=ignore;
 151
 152         if ((board_type & 0xf00) == 0x400) {
 153                 board_type=1;
 154                 buf=nvram_get("boardtype")?:"";
 155                 if (!strcmp(buf,"bcm94710dev")) {
 156                         buf=nvram_get("boardnum")?:"";
 157                         if (!strcmp(buf,"42")) {
 158                                 // wrt54g v1.x
 159                                 set_diag=v1_set_diag;
 160                                 set_dmz=v1_set_dmz;
 161                                 reset_gpio=(1<<6);
 162                                 reset_polarity=0;
 163                         } else if (!strcmp(buf,"asusX")) {
 164                                 //asus wl-500g
 165                                 //no leds
 166                                 reset_gpio=(1<<6);
 167                                 reset_polarity=1;
 168                         }
 169                 } else if (!strcmp(buf,"bcm94710ap")) {
 170                         buf=nvram_get("boardnum")?:"";
 171                         if (!strcmp(buf,"42")) {
 172                                 // buffalo
 173                                 set_dmz=v2_set_dmz;
 174                                 reset_gpio=(1<<4);
 175                                 reset_polarity=1;
 176                         } else if (!strcmp(buf,"44")) {
 177                                 //dell truemobile
 178                                 set_dmz=v2_set_dmz;
 179                                 reset_gpio=(1<<0);
 180                                 reset_polarity=0;
 181                         }
 182                 }
 183         } else {
 184                 board_type=2;
 185                 set_diag=v2_set_diag;
 186                 set_dmz=v2_set_dmz;
 187                 reset_gpio=(1<<6);
 188                 reset_polarity=0;
 189                 buf=nvram_get("boardnum")?:"";
 190                 if (!strcmp(buf,"44")) {
 191                         //motorola
 192                         set_diag=ignore;
 193                         set_dmz=ignore;
 194                         reset_gpio=(1<<5);
 195                         reset_polarity=0;
 196                 }
 197                 if (!strcmp(buf,"00")) {
 198                         //buffalo
 199                         set_diag=ignore;
 200                         set_dmz=ignore;
 201                         reset_gpio=(1<<7);
 202                         reset_polarity=1;
 203                 }
 204                 if (!strcmp(buf,"45")) {
 205                         //wl-500g deluxe
 206                         set_diag=ignore;
 207                         set_dmz=ignore;
 208                         reset_gpio=(1<<6);
 209                         reset_polarity=1;
 210                 }
 211         }
 212         printk(KERN_INFO "using v%d hardware\n",board_type);
 213
 214         diag_sysctl_header = register_sysctl_table(sys_diag, 0);
 215         diag_change();
 216
 217         return 0;
 218 }
 219
 220 static void __exit diag_exit()
 221 {
 222         unregister_sysctl_table(diag_sysctl_header);
 223 }
 224
 225 module_init(diag_init);
 226 module_exit(diag_exit);