package/broadcom-diag/src/diag.c

   1 /*
   2  * diag.c - GPIO interface driver for Broadcom boards
   3  *
   4  * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
   5  * Copyright (C) 2006-2007 Felix Fietkau <nbd@openwrt.org>
   6  * Copyright (C) 2008 Andy Boyett <agb@openwrt.org>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * as published by the Free Software Foundation; either version 2
  11  * of the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  21  *
  22  */
  23 #include <linux/module.h>
  24 #include <linux/pci.h>
  25 #include <linux/kmod.h>
  26 #include <linux/proc_fs.h>
  27 #include <linux/timer.h>
  28 #include <linux/version.h>
  29 #include <asm/uaccess.h>
  30 #include <linux/workqueue.h>
  31 #include <linux/skbuff.h>
  32 #include <linux/netlink.h>
  33 #include <linux/kobject.h>
  34 #include <net/sock.h>
  35 #include <bcm47xx_board.h>
  36 extern u64 uevent_next_seqnum(void);
  37
  38 #include "gpio.h"
  39 #include "diag.h"
  40 #define getvar(str) (nvram_get(str)?:"")
  41
  42 static inline int startswith (char *source, char *cmp) { return !strncmp(source,cmp,strlen(cmp)); }
  43 static int fill_event(struct event_t *);
  44 static unsigned int gpiomask = 0;
  45 module_param(gpiomask, int, 0644);
  46
  47 enum {
  48         /* Linksys */
  49         WAP54GV1,
  50         WAP54GV2,
  51         WAP54GV3,
  52         WRT54GV1,
  53         WRT54G,
  54         WRTSL54GS,
  55         WRT54G3G,
  56         WRT54G3GV2_VF,
  57         WRT150NV1,
  58         WRT150NV11,
  59         WRT160NV1,
  60         WRT160NV3,
  61         WRT300NV11,
  62         WRT350N,
  63         WRT600N,
  64         WRT600NV11,
  65         WRT610N,
  66         WRT610NV2,
  67         E1000V1,
  68         E3000V1,
  69
  70         /* ASUS */
  71         WLHDD,
  72         WL300G,
  73         WL320GE,
  74         WL330GE,
  75         WL500G,
  76         WL500GD,
  77         WL500GP,
  78         WL500GPV2,
  79         WL500W,
  80         WL520GC,
  81         WL520GU,
  82         ASUS_4702,
  83         WL700GE,
  84         RTN16,
  85
  86         /* Buffalo */
  87         WBR2_G54,
  88         WHR_G54S,
  89         WHR_HP_G54,
  90         WHR_G125,
  91         WHR2_A54G54,
  92         WLA2_G54L,
  93         WZR_G300N,
  94         WZR_RS_G54,
  95         WZR_RS_G54HP,
  96         BUFFALO_UNKNOWN,
  97         BUFFALO_UNKNOWN_4710,
  98
  99         /* Siemens */
 100         SE505V1,
 101         SE505V2,
 102
 103         /* US Robotics */
 104         USR5461,
 105
 106         /* Dell */
 107         TM2300,
 108         TM2300V2,
 109
 110         /* Motorola */
 111         WE800G,
 112         WR850GV1,
 113         WR850GV2V3,
 114         WR850GP,
 115
 116         /* Belkin */
 117         BELKIN_UNKNOWN,
 118         BELKIN_F7D4301,
 119
 120         /* Netgear */
 121         WGT634U,
 122         WNR834BV1,
 123         WNR834BV2,
 124         WNDR3400V1,
 125
 126         /* Trendware */
 127         TEW411BRPP,
 128
 129         /* SimpleTech */
 130         STI_NAS,
 131
 132         /* D-Link */
 133         DIR130,
 134         DIR320,
 135         DIR330,
 136         DWL3150,
 137
 138         /* Sitecom */
 139         WL105B,
 140
 141         /* Western Digital */
 142         WDNetCenter,
 143
 144         /* Askey */
 145         RT210W,
 146
 147         /* OvisLink */
 148         WL1600GL,
 149
 150         /* Microsoft */
 151         MN700,
 152
 153         /* Edimax */
 154         PS1208MFG,
 155 };
 156
 157 static void __init bcm4780_init(void) {
 158                 int pin = 1 << 3;
 159
 160                 /* Enables GPIO 3 that controls HDD and led power on ASUS WL-700gE */
 161                 printk(MODULE_NAME ": Spinning up HDD and enabling leds\n");
 162                 bcm47xx_gpio_outen(pin, pin);
 163                 bcm47xx_gpio_control(pin, 0);
 164                 bcm47xx_gpio_out(pin, pin);
 165
 166                 /* Wait 5s, so the HDD can spin up */
 167                 set_current_state(TASK_INTERRUPTIBLE);
 168                 schedule_timeout(HZ * 5);
 169 }
 170
 171 static void __init NetCenter_init(void) {
 172                 /* unset pin 6 (+12V) */
 173                 int pin = 1 << 6;
 174                 bcm47xx_gpio_outen(pin, pin);
 175                 bcm47xx_gpio_control(pin, 0);
 176                 bcm47xx_gpio_out(pin, pin);
 177                 /* unset pin 1 (turn off red led, blue will light alone if +5V comes up) */
 178                 pin = 1 << 1;
 179                 bcm47xx_gpio_outen(pin, pin);
 180                 bcm47xx_gpio_control(pin, 0);
 181                 bcm47xx_gpio_out(pin, pin);
 182                 /* unset pin 3 (+5V) and wait 5 seconds (harddisk spin up) */
 183                 bcm4780_init();
 184 }
 185
 186 static void __init bcm57xx_init(void) {
 187         int pin = 1 << 2;
 188
 189         /* FIXME: switch comes up, but port mappings/vlans not right */
 190         bcm47xx_gpio_outen(pin, pin);
 191         bcm47xx_gpio_control(pin, 0);
 192         bcm47xx_gpio_out(pin, pin);
 193 }
 194
 195 static struct platform_t __initdata platforms[] = {
 196         /* Linksys */
 197         [WAP54GV1] = {
 198                 .name           = "Linksys WAP54G V1",
 199                 .buttons        = {
 200                         { .name = "reset",      .gpio = 1 << 0 },
 201                 },
 202                 .leds           = {
 203                         { .name = "diag",       .gpio = 1 << 3 },
 204                         { .name = "wlan",       .gpio = 1 << 4 },
 205                 },
 206         },
 207         [WAP54GV2] = {
 208                 .name           = "Linksys WAP54G V2",
 209                 .buttons        = {
 210                         { .name = "reset",      .gpio = 1 << 0 },
 211                 },
 212                 .leds           = {
 213                         { .name = "wlan",       .gpio = 1 << 5, .polarity = REVERSE },
 214                         /* GPIO 6 is b44 (eth0, LAN) PHY power */
 215                 },
 216         },
 217         [WAP54GV3] = {
 218                 .name           = "Linksys WAP54G V3",
 219                 .buttons        = {
 220                         /* FIXME: verify this */
 221                         { .name = "reset",      .gpio = 1 << 7 },
 222                         { .name = "ses",        .gpio = 1 << 0 },
 223                 },
 224                 .leds           = {
 225                         /* FIXME: diag? */
 226                         { .name = "ses",        .gpio = 1 << 1 },
 227                 },
 228         },
 229         [WRT54GV1] = {
 230                 .name           = "Linksys WRT54G V1.x",
 231                 .buttons        = {
 232                         { .name = "reset",      .gpio = 1 << 6 },
 233                 },
 234                 .leds           = {
 235                         { .name = "diag",       .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
 236                         { .name = "dmz",        .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
 237                 },
 238         },
 239         [WRT54G] = {
 240                 .name           = "Linksys WRT54G/GS/GL",
 241                 .buttons        = {
 242                         { .name = "reset",      .gpio = 1 << 6 },
 243                         { .name = "ses",        .gpio = 1 << 4 },
 244                 },
 245                 .leds           = {
 246                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 247                         { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
 248                         { .name = "ses_white",  .gpio = 1 << 2, .polarity = REVERSE },
 249                         { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
 250                         { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
 251                 },
 252         },
 253         [WRTSL54GS] = {
 254                 .name           = "Linksys WRTSL54GS",
 255                 .buttons        = {
 256                         { .name = "reset",      .gpio = 1 << 6 },
 257                         { .name = "ses",        .gpio = 1 << 4 },
 258                 },
 259                 .leds           = {
 260                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 261                         { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },
 262                         { .name = "ses_white",  .gpio = 1 << 5, .polarity = REVERSE },
 263                         { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
 264                 },
 265         },
 266         [WRT54G3G] = {
 267                 .name           = "Linksys WRT54G3G",
 268                 .buttons        = {
 269                         { .name = "reset",      .gpio = 1 << 6 },
 270                         { .name = "3g",         .gpio = 1 << 4 },
 271                 },
 272                 .leds           = {
 273                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 274                         { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
 275                         { .name = "3g_green",   .gpio = 1 << 2, .polarity = NORMAL },
 276                         { .name = "3g_blue",    .gpio = 1 << 3, .polarity = NORMAL },
 277                         { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
 278                 },
 279         },
 280         [WRT54G3GV2_VF] = {
 281                 .name           = "Linksys WRT54G3GV2-VF",
 282                 .buttons        = {
 283                         { .name = "reset",      .gpio = 1 << 6 },
 284                         { .name = "3g",         .gpio = 1 << 5 },
 285                 },
 286                 .leds           = {
 287                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 288                         { .name = "3g_green",   .gpio = 1 << 2, .polarity = NORMAL },
 289                         { .name = "3g_blue",    .gpio = 1 << 3, .polarity = NORMAL },
 290                 },
 291         },
 292         [WRT150NV1] = {
 293                 .name           = "Linksys WRT150N V1",
 294                 .buttons        = {
 295                         { .name = "reset",      .gpio = 1 << 6 },
 296                         { .name = "ses",        .gpio = 1 << 4 },
 297                 },
 298                 .leds           = {
 299                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 300                         { .name = "ses_green",  .gpio = 1 << 5, .polarity = REVERSE },
 301                         { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
 302                 },
 303         },
 304         [WRT150NV11] = {
 305                 .name           = "Linksys WRT150N V1.1",
 306                 .buttons        = {
 307                         { .name = "reset",      .gpio = 1 << 6 },
 308                         { .name = "ses",        .gpio = 1 << 4 },
 309                 },
 310                 .leds           = {
 311                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 312                         { .name = "ses_green",  .gpio = 1 << 5, .polarity = REVERSE },
 313                         { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
 314                 },
 315         },
 316         [WRT160NV1] = {
 317                 .name           = "Linksys WRT160N v1.x",
 318                 .buttons        = {
 319                         { .name = "reset",      .gpio = 1 << 6 },
 320                         { .name = "ses",        .gpio = 1 << 4 },
 321                 },
 322                 .leds           = {
 323                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 324                         { .name = "ses_blue",   .gpio = 1 << 5, .polarity = REVERSE },
 325                         { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
 326                 },
 327         },
 328         [WRT160NV3] = {
 329                 .name           = "Linksys WRT160N V3",
 330                 .buttons        = {
 331                         { .name = "reset",      .gpio = 1 << 6 },
 332                         { .name = "ses",        .gpio = 1 << 5 },
 333                 },
 334                 .leds           = {
 335                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 336                         { .name = "ses_blue",   .gpio = 1 << 4, .polarity = REVERSE },
 337                         { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE },
 338                 },
 339         },
 340         [WRT300NV11] = {
 341                 .name           = "Linksys WRT300N V1.1",
 342                 .buttons        = {
 343                         { .name = "reset",     .gpio = 1 << 6 }, // "Reset" on back panel
 344                         { .name = "ses",       .gpio = 1 << 4 }, // "Reserved" on top panel
 345                 },
 346                 .leds           = {
 347                         { .name = "power",     .gpio = 1 << 1, .polarity = NORMAL  }, // "Power"
 348                         { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
 349                         { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
 350                 },
 351                 .platform_init = bcm57xx_init,
 352         },
 353         [WRT350N] = {
 354                 .name           = "Linksys WRT350N",
 355                 .buttons        = {
 356                         { .name = "reset",      .gpio = 1 << 6 },
 357                         { .name = "ses",        .gpio = 1 << 8 },
 358                 },
 359                 .leds           = {
 360                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 361                         { .name = "ses_amber",  .gpio = 1 << 3, .polarity = REVERSE },
 362                         { .name = "ses_green",  .gpio = 1 << 9, .polarity = REVERSE },
 363                         { .name = "usb_blink",  .gpio = 1 << 10, .polarity = REVERSE },
 364                         { .name = "usb",        .gpio = 1 << 11, .polarity = REVERSE },
 365                 },
 366                 .platform_init = bcm57xx_init,
 367         },
 368         [WRT600N] = {
 369                 .name           = "Linksys WRT600N",
 370                 .buttons        = {
 371                         { .name = "reset",      .gpio = 1 << 6 },
 372                         { .name = "ses",        .gpio = 1 << 7 },
 373                 },
 374                 .leds           = {
 375                         { .name = "power",              .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
 376                         { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
 377                         { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
 378                         { .name = "wl0_ses_green",      .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
 379                         { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
 380                         { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
 381                 },
 382                 .platform_init = bcm57xx_init,
 383         },
 384         [WRT600NV11] = {
 385                 .name           = "Linksys WRT600N V1.1",
 386                 .buttons        = {
 387                         { .name = "reset",      .gpio = 1 << 6 },
 388                         { .name = "ses",        .gpio = 1 << 7 },
 389                 },
 390                 .leds           = {
 391                         { .name = "power",             .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
 392                         { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
 393                         { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
 394                         { .name = "wl0_ses_green",     .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
 395                         { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
 396                         { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
 397                 },
 398                 .platform_init = bcm57xx_init,
 399         },
 400         [WRT610N] = {
 401                 .name           = "Linksys WRT610N",
 402                 .buttons        = {
 403                         { .name = "reset",      .gpio = 1 << 6 },
 404                         { .name = "ses",        .gpio = 1 << 8 },
 405                 },
 406                 .leds           = {
 407                         { .name = "power",      .gpio = 1 << 1,  .polarity = NORMAL }, // Power LED
 408                         { .name = "usb",        .gpio = 1 << 0,  .polarity = REVERSE }, // USB LED
 409                         { .name = "ses_amber",  .gpio = 1 << 3,  .polarity = REVERSE }, // WiFi protected setup LED amber
 410                         { .name = "ses_blue",   .gpio = 1 << 9,  .polarity = REVERSE }, // WiFi protected setup LED blue
 411                 },
 412         },
 413         [WRT610NV2] = {
 414                 .name           = "Linksys WRT610N V2",
 415                 .buttons        = {
 416                         { .name = "reset",      .gpio = 1 << 6 },
 417                         { .name = "ses",        .gpio = 1 << 4 },
 418                 },
 419                 .leds           = {
 420                         { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },   // Power LED
 421                         { .name = "usb",        .gpio = 1 << 7, .polarity = NORMAL },   // USB LED
 422                         { .name = "ses_amber",  .gpio = 1 << 0, .polarity = REVERSE },  // WiFi protected setup LED amber
 423                         { .name = "ses_blue",   .gpio = 1 << 3, .polarity = REVERSE },  // WiFi protected setup LED blue
 424                         { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },   // Wireless LED
 425                 },
 426         },
 427         /* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */
 428         [E1000V1] = {
 429                 .name           = "Linksys E1000 V1",
 430                 .buttons        = {
 431                         { .name = "reset",      .gpio = 1 << 6 },
 432                         { .name = "wps",        .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */
 433                 },
 434                 .leds           = {
 435                         /** turns on leds for all ethernet ports (wan too)
 436                          *  this also disconnects some, or maybe all, ethernet ports
 437                          *  1: leds work normally
 438                          *  0: all lit all the time */
 439                         /* nvram get gpio3=robo_reset */
 440                         { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
 441                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 442                         { .name = "ses_blue",   .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */
 443                         { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */
 444                 },
 445         },
 446         [E3000V1] = {
 447                 .name           = "Linksys E3000 V1",
 448                 .buttons        = {
 449                         { .name = "reset",      .gpio = 1 << 6 },
 450                         { .name = "ses",        .gpio = 1 << 4 },
 451                 },
 452                 .leds           = {
 453                         { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },   // Power LED
 454                         { .name = "usb",        .gpio = 1 << 7, .polarity = NORMAL },   // USB LED
 455                         { .name = "ses_amber",  .gpio = 1 << 0, .polarity = REVERSE },  // WiFi protected setup LED amber
 456                         { .name = "ses_blue",   .gpio = 1 << 3, .polarity = REVERSE },  // WiFi protected setup LED blue
 457                         { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },   // Wireless LED
 458                 },
 459         },
 460         /* Asus */
 461         [WLHDD] = {
 462                 .name           = "ASUS WL-HDD",
 463                 .buttons        = {
 464                         { .name = "reset",      .gpio = 1 << 6 },
 465                 },
 466                 .leds           = {
 467                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 468                         { .name = "usb",        .gpio = 1 << 2, .polarity = REVERSE },
 469                 },
 470         },
 471         [WL300G] = {
 472                 .name           = "ASUS WL-300g",
 473                 .buttons        = {
 474                         { .name = "reset",      .gpio = 1 << 6 },
 475                 },
 476                 .leds           = {
 477                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 478                 },
 479         },
 480         [WL320GE] = {
 481                 .name           = "ASUS WL-320gE/WL-320gP",
 482                 .buttons        = {
 483                         { .name = "reset",      .gpio = 1 << 6 },
 484                 },
 485                 .leds           = {
 486                         { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
 487                         { .name = "power",      .gpio = 1 << 2, .polarity = REVERSE },
 488                         { .name = "link",       .gpio = 1 << 11, .polarity = REVERSE },
 489                 },
 490         },
 491         [WL330GE] = {
 492                 .name           = "ASUS WL-330gE",
 493                 .buttons        = {
 494                         { .name = "reset",      .gpio = 1 << 2 },
 495                 },
 496                 .leds           = {
 497                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 498                 },
 499         },
 500         [WL500G] = {
 501                 .name           = "ASUS WL-500g",
 502                 .buttons        = {
 503                         { .name = "reset",      .gpio = 1 << 6 },
 504                 },
 505                 .leds           = {
 506                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 507                 },
 508         },
 509         [WL500GD] = {
 510                 .name           = "ASUS WL-500g Deluxe",
 511                 .buttons        = {
 512                         { .name = "reset",      .gpio = 1 << 6 },
 513                 },
 514                 .leds           = {
 515                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 516                 },
 517         },
 518         [WL500GP] = {
 519                 .name           = "ASUS WL-500g Premium",
 520                 .buttons        = {
 521                         { .name = "reset",      .gpio = 1 << 0 },
 522                         { .name = "ses",        .gpio = 1 << 4 },
 523                 },
 524                 .leds           = {
 525                         { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
 526                 },
 527         },
 528         [WL500GPV2] = {
 529                 .name           = "ASUS WL-500g Premium V2",
 530                 .buttons        = {
 531                         { .name = "reset",      .gpio = 1 << 2 },
 532                         { .name = "ses",        .gpio = 1 << 3 },
 533                 },
 534                 .leds           = {
 535                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 536                         { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
 537                 },
 538         },
 539         [WL500W] = {
 540                 .name           = "ASUS WL-500W",
 541                 .buttons        = {
 542                         { .name = "reset",      .gpio = 1 << 6 },
 543                         { .name = "ses",        .gpio = 1 << 7 },
 544                 },
 545                 .leds           = {
 546                         { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
 547                 },
 548         },
 549         [WL520GC] = {
 550                 .name           = "ASUS WL-520GC",
 551                 .buttons        = {
 552                         { .name = "reset",      .gpio = 1 << 2 },
 553                         { .name = "ses",        .gpio = 1 << 3 },
 554                 },
 555                 .leds           = {
 556                 { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 557                         { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
 558                 },
 559         },
 560         [WL520GU] = {
 561                 .name           = "ASUS WL-520gU",
 562                 .buttons        = {
 563                         { .name = "reset",      .gpio = 1 << 2 },
 564                         { .name = "ses",        .gpio = 1 << 3 },
 565                 },
 566                 .leds           = {
 567                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 568                         { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
 569                 },
 570         },
 571         [ASUS_4702] = {
 572                 .name           = "ASUS (unknown, BCM4702)",
 573                 .buttons        = {
 574                         { .name = "reset",      .gpio = 1 << 6 },
 575                 },
 576                 .leds           = {
 577                         { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
 578                 },
 579         },
 580         [WL700GE] = {
 581                 .name           = "ASUS WL-700gE",
 582                 .buttons        = {
 583                         { .name = "reset",      .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
 584                         { .name = "ses",        .gpio = 1 << 4 }, // on back, actual name ezsetup
 585                         { .name = "power",      .gpio = 1 << 0 }, // on front
 586                         { .name = "copy",       .gpio = 1 << 6 }, // on front
 587                 },
 588                 .leds           = {
 589 #if 0
 590                         // GPIO that controls power led also enables/disables some essential functions
 591                         // - power to HDD
 592                         // - switch leds
 593                         { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },  // actual name power
 594 #endif
 595                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
 596                 },
 597                 .platform_init = bcm4780_init,
 598         },
 599         [RTN16] = {
 600                 .name           = "ASUS RT-N16",
 601                 .buttons        = {
 602                         { .name = "reset",      .gpio = 1 << 8 },
 603                         { .name = "ses",        .gpio = 1 << 5 },
 604                 },
 605                 .leds           = {
 606                         { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
 607                         { .name = "wlan",       .gpio = 1 << 7, .polarity = NORMAL },
 608                 },
 609         },
 610         /* Buffalo */
 611         [WHR_G54S] = {
 612                 .name           = "Buffalo WHR-G54S",
 613                 .buttons        = {
 614                         { .name = "reset",      .gpio = 1 << 4 },
 615                         { .name = "bridge",     .gpio = 1 << 5 },
 616                         { .name = "ses",        .gpio = 1 << 0 },
 617                 },
 618                 .leds           = {
 619                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 620                         { .name = "internal",   .gpio = 1 << 3, .polarity = REVERSE },
 621                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 622                         { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
 623                         { .name = "wlan",       .gpio = 1 << 2, .polarity = REVERSE },
 624                 },
 625         },
 626         [WBR2_G54] = {
 627                 .name           = "Buffalo WBR2-G54",
 628                 /* FIXME: verify */
 629                 .buttons        = {
 630                         { .name = "reset",      .gpio = 1 << 7 },
 631                 },
 632                 .leds           = {
 633                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
 634                 },
 635         },
 636         [WHR_HP_G54] = {
 637                 .name           = "Buffalo WHR-HP-G54",
 638                 .buttons        = {
 639                         { .name = "reset",      .gpio = 1 << 4 },
 640                         { .name = "bridge",     .gpio = 1 << 5 },
 641                         { .name = "ses",        .gpio = 1 << 0 },
 642                 },
 643                 .leds           = {
 644                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 645                         { .name = "internal",   .gpio = 1 << 3, .polarity = REVERSE },
 646                         { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
 647                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 648                         { .name = "wlan",       .gpio = 1 << 2, .polarity = REVERSE },
 649                 },
 650         },
 651         [WHR_G125] = {
 652                 .name           = "Buffalo WHR-G125",
 653                 .buttons        = {
 654                         { .name = "reset",      .gpio = 1 << 4 },
 655                         { .name = "bridge",     .gpio = 1 << 5 },
 656                         { .name = "ses",        .gpio = 1 << 0 },
 657                 },
 658                 .leds           = {
 659                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 660                         { .name = "internal",   .gpio = 1 << 3, .polarity = REVERSE },
 661                         { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
 662                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 663                         { .name = "wlan",       .gpio = 1 << 2, .polarity = REVERSE },
 664                 },
 665         },
 666         [WHR2_A54G54] = {
 667                 .name           = "Buffalo WHR2-A54G54",
 668                 .buttons        = {
 669                         { .name = "reset",      .gpio = 1 << 4 },
 670                 },
 671                 .leds           = {
 672                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 673                 },
 674         },
 675         [WLA2_G54L] = {
 676                 .name           = "Buffalo WLA2-G54L",
 677                 /* FIXME: verify */
 678                 .buttons        = {
 679                         { .name = "reset",      .gpio = 1 << 7 },
 680                 },
 681                 .leds           = {
 682                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
 683                 },
 684         },
 685         [WZR_G300N] = {
 686                 .name           = "Buffalo WZR-G300N",
 687                 .buttons        = {
 688                         { .name = "reset",      .gpio = 1 << 4 },
 689                 },
 690                 .leds           = {
 691                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 692                         { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
 693                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 694                 },
 695         },
 696         [WZR_RS_G54] = {
 697                 .name           = "Buffalo WZR-RS-G54",
 698                 .buttons        = {
 699                         { .name = "ses",        .gpio = 1 << 0 },
 700                         { .name = "reset",      .gpio = 1 << 4 },
 701                 },
 702                 .leds           = {
 703                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 704                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 705                         { .name = "vpn",        .gpio = 1 << 1, .polarity = REVERSE },
 706                 },
 707         },
 708         [WZR_RS_G54HP] = {
 709                 .name           = "Buffalo WZR-RS-G54HP",
 710                 .buttons        = {
 711                         { .name = "ses",        .gpio = 1 << 0 },
 712                         { .name = "reset",      .gpio = 1 << 4 },
 713                 },
 714                 .leds           = {
 715                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 716                         { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
 717                         { .name = "vpn",        .gpio = 1 << 1, .polarity = REVERSE },
 718                 },
 719         },
 720         [BUFFALO_UNKNOWN] = {
 721                 .name           = "Buffalo (unknown)",
 722                 .buttons        = {
 723                         { .name = "reset",      .gpio = 1 << 7 },
 724                 },
 725                 .leds           = {
 726                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
 727                 },
 728         },
 729         [BUFFALO_UNKNOWN_4710] = {
 730                 .name           = "Buffalo (unknown, BCM4710)",
 731                 .buttons        = {
 732                         { .name = "reset",      .gpio = 1 << 4 },
 733                 },
 734                 .leds           = {
 735                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
 736                 },
 737         },
 738         /* Siemens */
 739         [SE505V1] = {
 740                 .name           = "Siemens SE505 V1",
 741                 .buttons        = {
 742                         /* No usable buttons */
 743                 },
 744                 .leds           = {
 745 //                      { .name = "power",      .gpio = 1 << 0  .polarity = REVERSE },  // Usable when retrofitting D26 (?)
 746                         { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },  // actual name WWW
 747                         { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
 748                 },
 749         },
 750         [SE505V2] = {
 751                 .name           = "Siemens SE505 V2",
 752                 .buttons        = {
 753                         /* No usable buttons */
 754                 },
 755                 .leds           = {
 756                         { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
 757                         { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },  // actual name WWW
 758                         { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
 759                 },
 760         },
 761         /* US Robotics */
 762         [USR5461] = {
 763                 .name           = "U.S. Robotics USR5461",
 764                 .buttons        = {
 765                         /* No usable buttons */
 766                 },
 767                 .leds           = {
 768                         { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
 769                         { .name = "printer",    .gpio = 1 << 1, .polarity = REVERSE },
 770                 },
 771         },
 772         /* Dell */
 773         [TM2300] = {
 774                 .name           = "Dell TrueMobile 2300",
 775                 .buttons        = {
 776                         { .name = "reset",      .gpio = 1 << 0 },
 777                 },
 778                 .leds           = {
 779                         { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
 780                         { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
 781                 },
 782         },
 783         [TM2300V2] = {
 784                 .name           = "Dell TrueMobile 2300 v2",
 785                 .buttons        = {
 786                         { .name = "reset",      .gpio = 1 << 0 },
 787                 },
 788                 .leds           = {
 789                         { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
 790                         { .name = "power",      .gpio = 1 << 7, .polarity = REVERSE },
 791                 },
 792         },
 793         /* Motorola */
 794         [WE800G] = {
 795                 .name           = "Motorola WE800G",
 796                 .buttons        = {
 797                         { .name = "reset",      .gpio = 1 << 0 },
 798                 },
 799                 .leds           = {
 800                         { .name = "power",      .gpio = 1 << 4, .polarity = NORMAL },
 801                         { .name = "diag",       .gpio = 1 << 2, .polarity = REVERSE },
 802                         { .name = "wlan_amber", .gpio = 1 << 1, .polarity = NORMAL },
 803                 },
 804         },
 805         [WR850GV1] = {
 806                 .name           = "Motorola WR850G V1",
 807                 .buttons        = {
 808                         { .name = "reset",      .gpio = 1 << 0 },
 809                 },
 810                 .leds           = {
 811                         { .name = "power",      .gpio = 1 << 4, .polarity = NORMAL },
 812                         { .name = "diag",       .gpio = 1 << 3, .polarity = REVERSE },
 813                         { .name = "dmz",        .gpio = 1 << 6, .polarity = NORMAL },
 814                         { .name = "wlan_red",   .gpio = 1 << 5, .polarity = REVERSE },
 815                         { .name = "wlan_green", .gpio = 1 << 7, .polarity = REVERSE },
 816                 },
 817         },
 818         [WR850GV2V3] = {
 819                 .name           = "Motorola WR850G V2/V3",
 820                 .buttons        = {
 821                         { .name = "reset",      .gpio = 1 << 5 },
 822                 },
 823                 .leds           = {
 824                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 825                         { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
 826                         { .name = "wan",        .gpio = 1 << 6, .polarity = INPUT },
 827                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 828                 },
 829         },
 830         [WR850GP] = {
 831                 .name           = "Motorola WR850GP",
 832                 .buttons        = {
 833                         { .name = "reset",      .gpio = 1 << 5 },
 834                 },
 835                 .leds           = {
 836                         { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
 837                         { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
 838                         { .name = "dmz",        .gpio = 1 << 6, .polarity = REVERSE },
 839                         { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
 840                 },
 841         },
 842
 843         /* Belkin */
 844         [BELKIN_UNKNOWN] = {
 845                 .name           = "Belkin (unknown)",
 846                 /* FIXME: verify & add detection */
 847                 .buttons        = {
 848                         { .name = "reset",      .gpio = 1 << 7 },
 849                 },
 850                 .leds           = {
 851                         { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },
 852                         { .name = "wlan",       .gpio = 1 << 3, .polarity = NORMAL },
 853                         { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
 854                 },
 855         },
 856         [BELKIN_F7D4301] = {
 857                 .name           = "Belkin PlayMax F7D4301",
 858                 .buttons        = {
 859                         { .name = "reset",      .gpio = 1 << 6 },
 860                         { .name = "wps",        .gpio = 1 << 8 },
 861                 },
 862                 .leds           = {
 863                         { .name = "power",      .gpio = 1 << 11, .polarity = REVERSE },
 864                         { .name = "wlan",       .gpio = 1 << 13, .polarity = REVERSE },
 865                         { .name = "led0",       .gpio = 1 << 14, .polarity = REVERSE },
 866                         { .name = "led1",       .gpio = 1 << 15, .polarity = REVERSE },
 867                 },
 868         },
 869         /* Netgear */
 870         [WGT634U] = {
 871                 .name           = "Netgear WGT634U",
 872                 .buttons        = {
 873                         { .name = "reset",      .gpio = 1 << 2 },
 874                 },
 875                 .leds           = {
 876                         { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },
 877                 },
 878         },
 879         /* Netgear */
 880         [WNR834BV1] = {
 881                 .name           = "Netgear WNR834B V1",
 882                 .buttons        = { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ },
 883                 .leds           = {
 884                         { .name = "power",      .gpio = 1 << 4, .polarity = REVERSE },
 885                         { .name = "diag",       .gpio = 1 << 5, .polarity = REVERSE },
 886                         { .name = "wlan",       .gpio = 1 << 6, .polarity = REVERSE },
 887                 },
 888         },
 889         /* Netgear */
 890         [WNR834BV2] = {
 891                 .name           = "Netgear WNR834B V2",
 892                 .buttons        = {
 893                         { .name = "reset",      .gpio = 1 << 6 },
 894                 },
 895                 .leds           = {
 896                         { .name = "power",      .gpio = 1 << 2, .polarity = NORMAL },
 897                         { .name = "diag",       .gpio = 1 << 3, .polarity = NORMAL },
 898                         { .name = "connected",  .gpio = 1 << 7, .polarity = NORMAL },
 899                 },
 900         },
 901         [WNDR3400V1] = {
 902                 .name           = "Netgear WNDR3400 V1",
 903                 .buttons        = {
 904                         /* nvram get gpio5=robo_reset */
 905                         { .name = "reset",      .gpio = 1 << 4 },
 906                         { .name = "wps",        .gpio = 1 << 6 },
 907                         { .name = "wlan",       .gpio = 1 << 8 },
 908                 },
 909                 .leds           = {
 910                         { .name = "wlan",       .gpio = 0 << 0, .polarity = NORMAL },
 911                         { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
 912                         { .name = "power",      .gpio = 1 << 3, .polarity = NORMAL },
 913                         { .name = "diag",       .gpio = 1 << 7, .polarity = NORMAL },
 914                         { .name = "usb",        .gpio = 1 << 2, .polarity = REVERSE },
 915                 },
 916         },
 917         /* Trendware */
 918         [TEW411BRPP] = {
 919                 .name           = "Trendware TEW411BRP+",
 920                 .buttons        = {
 921                         { /* No usable buttons */ },
 922                 },
 923                 .leds           = {
 924                         { .name = "power",      .gpio = 1 << 7, .polarity = NORMAL },
 925                         { .name = "wlan",       .gpio = 1 << 1, .polarity = NORMAL },
 926                         { .name = "bridge",     .gpio = 1 << 6, .polarity = NORMAL },
 927                 },
 928         },
 929         /* SimpleTech */
 930         [STI_NAS] = {
 931                 .name      = "SimpleTech SimpleShare NAS",
 932                 .buttons        = {
 933                         { .name = "reset",      .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe.
 934                 },
 935                 .leds      = {
 936                         { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
 937                 },
 938                 .platform_init = bcm4780_init,
 939         },
 940         /* D-Link */
 941         [DIR130] = {
 942                 .name     = "D-Link DIR-130",
 943                 .buttons        = {
 944                         { .name = "reset",      .gpio = 1 << 3},
 945                         { .name = "reserved",   .gpio = 1 << 7},
 946                 },
 947                 .leds      = {
 948                         { .name = "diag",       .gpio = 1 << 0},
 949                         { .name = "blue",       .gpio = 1 << 6},
 950                 },
 951         },
 952         [DIR320] = {
 953                 .name     = "D-Link DIR-320",
 954                 .buttons        = {
 955                         { .name = "reserved",   .gpio = 1 << 6},
 956                         { .name = "reset",      .gpio = 1 << 7},
 957                 },
 958                 .leds      = {
 959                         { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
 960                         { .name = "diag",       .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */
 961                         { .name = "red",        .gpio = 1 << 3, .polarity = REVERSE },
 962                         { .name = "blue",       .gpio = 1 << 4, .polarity = REVERSE },
 963                         { .name = "usb",        .gpio = 1 << 5, .polarity = NORMAL },
 964                 },
 965         },
 966         [DIR330] = {
 967                 .name     = "D-Link DIR-330",
 968                 .buttons        = {
 969                         { .name = "reset",      .gpio = 1 << 3},
 970                         { .name = "reserved",   .gpio = 1 << 7},
 971                 },
 972                 .leds      = {
 973                         { .name = "diag",       .gpio = 1 << 0},
 974                         { .name = "usb",        .gpio = 1 << 4},
 975                         { .name = "blue",       .gpio = 1 << 6},
 976                 },
 977         },
 978         [DWL3150] = {
 979                 .name   = "D-Link DWL-3150",
 980                 .buttons        = {
 981                         { .name = "reset",      .gpio = 1 << 7},
 982                 },
 983                 .leds     = {
 984                         { .name = "diag",       .gpio = 1 << 2},
 985                         { .name = "status",     .gpio = 1 << 1},
 986                 },
 987         },
 988         /* Double check */
 989         [WL105B] = {
 990                 .name   = "Sitecom WL-105b",
 991                 .buttons        = {
 992                         { .name = "reset",      .gpio = 1 << 10},
 993                 },
 994                 .leds     = {
 995                         { .name = "wlan",       .gpio = 1 << 4},
 996                         { .name = "power",      .gpio = 1 << 3},
 997                 },
 998         },
 999         /* Western Digital Net Center */
1000         [WDNetCenter] = {
1001                 .name   = "Western Digital NetCenter",
1002                 .buttons        = {
1003                         { .name = "power",      .gpio = 1 << 0},
1004                         { .name = "reset",      .gpio = 1 << 7},
1005                 },
1006                 .platform_init = NetCenter_init,
1007         },
1008         /* Askey (and clones) */
1009         [RT210W] = {
1010                 .name           = "Askey RT210W",
1011                 .buttons        = {
1012                         /* Power button is hard-wired to hardware reset */
1013                         /* but is also connected to GPIO 7 (probably for bootloader recovery)  */
1014                         { .name = "power",      .gpio = 1 << 7},
1015                 },
1016                 .leds           = {
1017                         /* These were verified and named based on Belkin F5D4230-4 v1112 */
1018                         { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
1019                         { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
1020                         { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
1021                 },
1022         },
1023         [WL1600GL] = {
1024                 .name           = "OvisLink WL-1600GL",
1025                 .buttons        = {
1026                         { .name = "reset",      .gpio = 1 << 3 },
1027                         { .name = "ses",        .gpio = 1 << 4 },
1028                 },
1029                 .leds           = {
1030                         { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
1031                         { .name = "wps",        .gpio = 1 << 2, .polarity = REVERSE },
1032                         { .name = "wlan",       .gpio = 1 << 1, .polarity = REVERSE },
1033                         { .name = "connected",  .gpio = 1 << 0, .polarity = REVERSE },
1034                 },
1035         },
1036         /* Microsoft */
1037         [MN700] = {
1038                 .name   = "Microsoft MN-700",
1039                 .buttons        = {
1040                         { .name = "reset",      .gpio = 1 << 7 },
1041                 },
1042                 .leds     = {
1043                         { .name = "power",      .gpio = 1 << 6, .polarity = NORMAL },
1044                 },
1045         },
1046         /* Edimax */
1047         [PS1208MFG] = {
1048                 .name   = "Edimax PS-1208MFG",
1049                 .buttons        = {
1050                         { .name = "reset",      .gpio = 1 << 4 },
1051                 },
1052                 .leds     = {
1053                         { .name = "status",     .gpio = 1 << 1, .polarity = NORMAL },
1054                         { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
1055                 },
1056         },
1057 };
1058
1059 static struct platform_t __init *platform_detect_legacy(void)
1060 {
1061         char *boardnum, *boardtype, *buf;
1062
1063         if (strcmp(getvar("nvram_type"), "cfe") == 0)
1064                 return &platforms[WGT634U];
1065
1066
1067         /* no easy model number, attempt to guess */
1068         boardnum = getvar("boardnum");
1069         boardtype = getvar("boardtype");
1070
1071         if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N  v1/V1.1 */
1072                 if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
1073                         return &platforms[WRT600NV11];
1074
1075         if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
1076                         return &platforms[WRT600N];
1077         }
1078
1079         if (startswith(getvar("pmon_ver"), "CFE")) {
1080                 /* CFE based - newer hardware */
1081                 if (!strcmp(boardnum, "42")) { /* Linksys */
1082                         if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "1"))
1083                                 return &platforms[WRT350N];
1084
1085                         if (!strcmp(boardtype, "0x0101") && !strcmp(getvar("boot_ver"), "v3.6"))
1086                                 return &platforms[WRT54G3G];
1087
1088                         if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
1089                                 return &platforms[WRTSL54GS];
1090
1091                         /* default to WRT54G */
1092                         return &platforms[WRT54G];
1093                 }
1094                 if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
1095                         return &platforms[WAP54GV2];
1096
1097                 if (!strcmp(boardnum, "8") && !strcmp(boardtype, "0x048e"))
1098                         return &platforms[WL1600GL];
1099
1100
1101                 if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
1102                         if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
1103                                 return &platforms[TM2300V2]; /* Dell TrueMobile 2300 v2 */
1104                 }
1105
1106                 if (!strcmp(boardnum, "45")) { /* ASUS */
1107                         if (!strcmp(boardtype,"0x0472"))
1108                                 return &platforms[WL500W];
1109                         else if (!strcmp(boardtype,"0x467"))
1110                                 return &platforms[WL320GE];
1111                         else
1112                                 return &platforms[WL500GD];
1113                 }
1114
1115                 if (!strcmp(boardnum, "10496"))
1116                         return &platforms[USR5461];
1117
1118                 if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */
1119                         return &platforms[SE505V2];
1120
1121                 if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") &&
1122                                 !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */
1123                         return &platforms[DIR320];
1124
1125                 if (!strncmp(boardnum, "TH",2) && !strcmp(boardtype,"0x042f")) {
1126                         return &platforms[WDNetCenter];
1127                 }
1128
1129                 if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B  V1 and V2*/
1130                         if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8"))
1131                                 return &platforms[WNR834BV1];
1132                         if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1"))
1133                                 return &platforms[WNR834BV2];
1134                 }
1135
1136         } else { /* PMON based - old stuff */
1137                 if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
1138                         (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
1139                         return &platforms[WR850GV1];
1140                 }
1141                 if (startswith(boardtype, "bcm94710dev")) {
1142                         if (!strcmp(boardnum, "42"))
1143                                 return &platforms[WRT54GV1];
1144                         if (simple_strtoul(boardnum, NULL, 0) == 2)
1145                                 return &platforms[WAP54GV1];
1146                 }
1147                 /* MN-700 has also hardware_version 'WL500-...', so use boardnum */
1148                 if (startswith(getvar("hardware_version"), "WL500-")) {
1149                         if (!strcmp(getvar("boardnum"), "mn700"))
1150                                 return &platforms[MN700];
1151                         else
1152                                 return &platforms[WL500G];
1153                 }
1154                 if (startswith(getvar("hardware_version"), "WL300-")) {
1155                         /* Either WL-300g or WL-HDD, do more extensive checks */
1156                         if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
1157                                 (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 1))
1158                                 return &platforms[WLHDD];
1159                         if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
1160                                 (simple_strtoul(getvar("et1phyaddr"), NULL, 0) == 10))
1161                                 return &platforms[WL300G];
1162                 }
1163                 /* Sitecom WL-105b */
1164                 if (startswith(boardnum, "2") && simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 1)
1165                         return &platforms[WL105B];
1166
1167                 /* unknown asus stuff, probably bcm4702 */
1168                 if (startswith(boardnum, "asusX"))
1169                         return &platforms[ASUS_4702];
1170
1171                 /* bcm4702 based Askey RT210W clones, Including:
1172                  * Askey RT210W (duh?)
1173                  * Siemens SE505v1
1174                  * Belkin F5D7230-4 before version v1444 (MiniPCI slot, not integrated)
1175                  */
1176                 if (!strcmp(boardtype,"bcm94710r4")
1177                  && !strcmp(boardnum ,"100")
1178                  && !strcmp(getvar("pmon_ver"),"v1.03.12.bk")
1179                    ){
1180                         return &platforms[RT210W];
1181                 }
1182         }
1183
1184         if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
1185                 if (startswith(boardtype, "bcm94710ap"))
1186                         return &platforms[BUFFALO_UNKNOWN_4710];
1187                 else
1188                         return &platforms[BUFFALO_UNKNOWN];
1189         }
1190
1191         if (startswith(getvar("CFEver"), "MotoWRv2") ||
1192                 startswith(getvar("CFEver"), "MotoWRv3") ||
1193                 !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
1194
1195                 return &platforms[WR850GV2V3];
1196         }
1197
1198         if (!strcmp(boardnum, "44") && !strcmp(getvar("boardflags"),"0x0388")) {  /* Trendware TEW-411BRP+ */
1199                 return &platforms[TEW411BRPP];
1200         }
1201
1202         if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */
1203                 return &platforms[STI_NAS];
1204
1205         if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */
1206                 return &platforms[DWL3150];
1207
1208         if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */
1209                 !strcmp(getvar("status_gpio"), "1")) /* gpio based detection */
1210                 return &platforms[PS1208MFG];
1211
1212         /* not found */
1213         return NULL;
1214 }
1215
1216 static struct platform_t __init *platform_detect(void)
1217 {
1218         enum bcm47xx_board board;
1219         const char *board_name;
1220
1221
1222         board = bcm47xx_board_get();
1223         board_name = bcm47xx_board_get_name();
1224         if (board != BCM47XX_BOARD_UNKNOWN && board != BCM47XX_BOARD_NON)
1225                 printk(MODULE_NAME ": kernel found a \"%s\"\n", board_name);
1226
1227         switch(board) {
1228         case BCM47XX_BOARD_ASUS_RTN16:
1229                 return &platforms[RTN16];
1230         case BCM47XX_BOARD_ASUS_WL330GE:
1231                 return &platforms[WL330GE];
1232         case BCM47XX_BOARD_ASUS_WL500GPV1:
1233                 return &platforms[WL500GP];
1234         case BCM47XX_BOARD_ASUS_WL500GPV2:
1235                 return &platforms[WL500GPV2];
1236         case BCM47XX_BOARD_ASUS_WL520GC:
1237                 return &platforms[WL520GC];
1238         case BCM47XX_BOARD_ASUS_WL520GU:
1239                 return &platforms[WL520GU];
1240         case BCM47XX_BOARD_ASUS_WL700GE:
1241                 return &platforms[WL700GE];
1242         case BCM47XX_BOARD_BELKIN_F7D4301:
1243                 return &platforms[BELKIN_F7D4301];
1244         case BCM47XX_BOARD_BUFFALO_WBR2_G54:
1245                 return &platforms[WBR2_G54];
1246         case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
1247                 return &platforms[WHR2_A54G54];
1248         case BCM47XX_BOARD_BUFFALO_WHR_G125:
1249                 return &platforms[WHR_G125];
1250         case BCM47XX_BOARD_BUFFALO_WHR_G54S:
1251                 return &platforms[WHR_G54S];
1252         case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
1253                 return &platforms[WHR_HP_G54];
1254         case BCM47XX_BOARD_BUFFALO_WLA2_G54L:
1255                 return &platforms[WLA2_G54L];
1256         case BCM47XX_BOARD_BUFFALO_WZR_G300N:
1257                 return &platforms[WZR_G300N];
1258         case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
1259                 return &platforms[WZR_RS_G54];
1260         case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
1261                 return &platforms[WZR_RS_G54HP];
1262         case BCM47XX_BOARD_DELL_TM2300:
1263                 return &platforms[TM2300];
1264         case BCM47XX_BOARD_DLINK_DIR130:
1265                 return &platforms[DIR130];
1266         case BCM47XX_BOARD_DLINK_DIR330:
1267                 return &platforms[DIR330];
1268         case BCM47XX_BOARD_LINKSYS_E1000V1:
1269                 return &platforms[E1000V1];
1270         case BCM47XX_BOARD_LINKSYS_E3000V1:
1271                 return &platforms[E3000V1];
1272         case BCM47XX_BOARD_LINKSYS_WRT150NV1:
1273                 return &platforms[WRT150NV1];
1274         case BCM47XX_BOARD_LINKSYS_WRT150NV11:
1275                 return &platforms[WRT150NV11];
1276         case BCM47XX_BOARD_LINKSYS_WRT160NV1:
1277                 return &platforms[WRT160NV1];
1278         case BCM47XX_BOARD_LINKSYS_WRT160NV3:
1279                 return &platforms[WRT160NV3];
1280         case BCM47XX_BOARD_LINKSYS_WRT300NV11:
1281                 return &platforms[WRT300NV11];
1282         case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
1283                 return &platforms[WRT54G3GV2_VF];
1284         case BCM47XX_BOARD_LINKSYS_WRT610NV1:
1285                 return &platforms[WRT610N];
1286         case BCM47XX_BOARD_LINKSYS_WRT610NV2:
1287                 return &platforms[WRT610NV2];
1288         case BCM47XX_BOARD_MOTOROLA_WE800G:
1289                 return &platforms[WE800G];
1290         case BCM47XX_BOARD_MOTOROLA_WR850GP:
1291                 return &platforms[WR850GP];
1292         case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
1293                 return &platforms[WR850GV2V3];
1294         case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
1295                 return &platforms[WNDR3400V1];
1296         case BCM47XX_BOARD_UNKNOWN:
1297         case BCM47XX_BOARD_NON:
1298                 printk(MODULE_NAME ": unknown board found, try legacy detect\n");
1299                 printk(MODULE_NAME ": please open a ticket at https://dev.openwrt.org and attach the complete nvram\n");
1300                 return platform_detect_legacy();
1301         default:
1302                 printk(MODULE_NAME ": board was detected as \"%s\", but not gpio configuration available\n", board_name);
1303                 printk(MODULE_NAME ": now trying legacy detect\n");
1304                 return platform_detect_legacy();
1305         }
1306 }
1307
1308 static inline void ssb_maskset32(struct ssb_device *dev,
1309                                   u16 offset, u32 mask, u32 set)
1310 {
1311         ssb_write32(dev, offset, (ssb_read32(dev, offset) & mask) | set);
1312 }
1313
1314 static void gpio_set_irqenable(int enabled, irqreturn_t (*handler)(int, void *))
1315 {
1316         int irq;
1317
1318         irq = gpio_to_irq(0);
1319         if (irq == -EINVAL) return;
1320
1321         if (enabled) {
1322                 if (request_irq(irq, handler, IRQF_SHARED, "gpio", handler))
1323                         return;
1324         } else {
1325                 free_irq(irq, handler);
1326         }
1327
1328         switch (bcm47xx_bus_type) {
1329 #ifdef CONFIG_BCM47XX_SSB
1330         case BCM47XX_BUS_TYPE_SSB:
1331                 if (bcm47xx_bus.ssb.chipco.dev)
1332                         ssb_maskset32(bcm47xx_bus.ssb.chipco.dev, SSB_CHIPCO_IRQMASK, ~SSB_CHIPCO_IRQ_GPIO, (enabled ? SSB_CHIPCO_IRQ_GPIO : 0));
1333                 break;
1334 #endif
1335 #ifdef CONFIG_BCM47XX_BCMA
1336         case BCM47XX_BUS_TYPE_BCMA:
1337                 if (bcm47xx_bus.bcma.bus.drv_cc.core)
1338                         bcma_maskset32(bcm47xx_bus.bcma.bus.drv_cc.core, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO, (enabled ? BCMA_CC_IRQ_GPIO : 0));
1339                 break;
1340 #endif
1341         }
1342 }
1343
1344 static void register_buttons(struct button_t *b)
1345 {
1346         for (; b->name; b++)
1347                 platform.button_mask |= b->gpio;
1348
1349         platform.button_mask &= ~gpiomask;
1350
1351         bcm47xx_gpio_outen(platform.button_mask, 0);
1352         bcm47xx_gpio_control(platform.button_mask, 0);
1353         platform.button_polarity = bcm47xx_gpio_in(~0) & platform.button_mask;
1354         bcm47xx_gpio_polarity(platform.button_mask, platform.button_polarity);
1355         bcm47xx_gpio_intmask(platform.button_mask, platform.button_mask);
1356
1357         gpio_set_irqenable(1, button_handler);
1358 }
1359
1360 static void unregister_buttons(struct button_t *b)
1361 {
1362         bcm47xx_gpio_intmask(platform.button_mask, 0);
1363
1364         gpio_set_irqenable(0, button_handler);
1365 }
1366
1367
1368 static void add_msg(struct event_t *event, char *msg, int argv)
1369 {
1370         char *s;
1371
1372         if (argv)
1373                 return;
1374
1375         s = skb_put(event->skb, strlen(msg) + 1);
1376         strcpy(s, msg);
1377 }
1378
1379 static void hotplug_button(struct work_struct *work)
1380 {
1381         struct event_t *event = container_of(work, struct event_t, wq);
1382         char *s;
1383
1384         event->skb = alloc_skb(2048, GFP_KERNEL);
1385
1386         s = skb_put(event->skb, strlen(event->action) + 2);
1387         sprintf(s, "%s@", event->action);
1388         fill_event(event);
1389
1390         NETLINK_CB(event->skb).dst_group = 1;
1391         broadcast_uevent(event->skb, 0, 1, GFP_KERNEL);
1392
1393         kfree(event);
1394 }
1395
1396
1397 static int fill_event (struct event_t *event)
1398 {
1399         static char buf[128];
1400
1401         add_msg(event, "HOME=/", 0);
1402         add_msg(event, "PATH=/sbin:/bin:/usr/sbin:/usr/bin", 0);
1403         add_msg(event, "SUBSYSTEM=button", 0);
1404         snprintf(buf, 128, "ACTION=%s", event->action);
1405         add_msg(event, buf, 0);
1406         snprintf(buf, 128, "BUTTON=%s", event->name);
1407         add_msg(event, buf, 0);
1408         snprintf(buf, 128, "SEEN=%ld", event->seen);
1409         add_msg(event, buf, 0);
1410         snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum());
1411         add_msg(event, buf, 0);
1412
1413         return 0;
1414 }
1415
1416
1417 static irqreturn_t button_handler(int irq, void *dev_id)
1418 {
1419         struct button_t *b;
1420         u32 in, changed;
1421
1422         in = bcm47xx_gpio_in(~0) & platform.button_mask;
1423         bcm47xx_gpio_polarity(platform.button_mask, in);
1424         changed = platform.button_polarity ^ in;
1425         platform.button_polarity = in;
1426
1427         changed &= ~bcm47xx_gpio_outen(0, 0);
1428
1429         for (b = platform.buttons; b->name; b++) {
1430                 struct event_t *event;
1431
1432                 if (!(b->gpio & changed)) continue;
1433
1434                 b->pressed ^= 1;
1435
1436                 if ((event = (struct event_t *)kzalloc (sizeof(struct event_t), GFP_ATOMIC))) {
1437                         event->seen = (jiffies - b->seen)/HZ;
1438                         event->name = b->name;
1439                         event->action = b->pressed ? "pressed" : "released";
1440                         INIT_WORK(&event->wq, (void *)(void *)hotplug_button);
1441                         schedule_work(&event->wq);
1442                 }
1443
1444                 b->seen = jiffies;
1445         }
1446         return IRQ_HANDLED;
1447 }
1448
1449 static void register_leds(struct led_t *l)
1450 {
1451         struct proc_dir_entry *p;
1452         u32 mask = 0;
1453         u32 oe_mask = 0;
1454         u32 val = 0;
1455
1456         leds = proc_mkdir("led", diag);
1457         if (!leds)
1458                 return;
1459
1460         for(; l->name; l++) {
1461                 if (l->gpio & gpiomask)
1462                         continue;
1463
1464                 if (l->gpio & GPIO_TYPE_EXTIF) {
1465                         l->state = 0;
1466                         set_led_extif(l);
1467                 } else {
1468                         if (l->polarity != INPUT) oe_mask |= l->gpio;
1469                         mask |= l->gpio;
1470                         val |= (l->polarity == NORMAL)?0:l->gpio;
1471                 }
1472
1473                 if (l->polarity == INPUT) continue;
1474
1475                 if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
1476                         l->proc.type = PROC_LED;
1477                         l->proc.ptr = l;
1478                         p->data = (void *) &l->proc;
1479                         p->proc_fops = &diag_proc_fops;
1480                 }
1481         }
1482
1483         bcm47xx_gpio_outen(mask, oe_mask);
1484         bcm47xx_gpio_control(mask, 0);
1485         bcm47xx_gpio_out(mask, val);
1486         bcm47xx_gpio_intmask(mask, 0);
1487 }
1488
1489 static void unregister_leds(struct led_t *l)
1490 {
1491         for(; l->name; l++)
1492                 remove_proc_entry(l->name, leds);
1493
1494         remove_proc_entry("led", diag);
1495 }
1496
1497 static void set_led_extif(struct led_t *led)
1498 {
1499         volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
1500         if (led->state)
1501                 *addr = 0xFF;
1502         else
1503                 *addr;
1504 }
1505
1506 static void led_flash(unsigned long dummy) {
1507         struct led_t *l;
1508         u32 mask = 0;
1509         u8 extif_blink = 0;
1510
1511         for (l = platform.leds; l->name; l++) {
1512                 if (l->flash) {
1513                         if (l->gpio & GPIO_TYPE_EXTIF) {
1514                                 extif_blink = 1;
1515                                 l->state = !l->state;
1516                                 set_led_extif(l);
1517                         } else {
1518                                 mask |= l->gpio;
1519                         }
1520                 }
1521         }
1522
1523         mask &= ~gpiomask;
1524         if (mask) {
1525                 u32 val = ~bcm47xx_gpio_in(~0);
1526
1527                 bcm47xx_gpio_outen(mask, mask);
1528                 bcm47xx_gpio_control(mask, 0);
1529                 bcm47xx_gpio_out(mask, val);
1530         }
1531         if (mask || extif_blink) {
1532                 mod_timer(&led_timer, jiffies + FLASH_TIME);
1533         }
1534 }
1535
1536 static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
1537 {
1538         struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
1539         char *page;
1540         int len = 0;
1541
1542         if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
1543                 return -ENOBUFS;
1544
1545         if (dent->data != NULL) {
1546                 struct prochandler_t *handler = (struct prochandler_t *) dent->data;
1547                 switch (handler->type) {
1548                         case PROC_LED: {
1549                                 struct led_t * led = (struct led_t *) handler->ptr;
1550                                 if (led->flash) {
1551                                         len = sprintf(page, "f\n");
1552                                 } else {
1553                                         if (led->gpio & GPIO_TYPE_EXTIF) {
1554                                                 len = sprintf(page, "%d\n", led->state);
1555                                         } else {
1556                                                 u32 in = (bcm47xx_gpio_in(~0) & led->gpio ? 1 : 0);
1557                                                 u8 p = (led->polarity == NORMAL ? 0 : 1);
1558                                                 len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
1559                                         }
1560                                 }
1561                                 break;
1562                         }
1563                         case PROC_MODEL:
1564                                 len = sprintf(page, "%s\n", platform.name);
1565                                 break;
1566                         case PROC_GPIOMASK:
1567                                 len = sprintf(page, "0x%04x\n", gpiomask);
1568                                 break;
1569                 }
1570         }
1571         len += 1;
1572
1573         if (*ppos < len) {
1574                 len = min_t(int, len - *ppos, count);
1575                 if (copy_to_user(buf, (page + *ppos), len)) {
1576                         kfree(page);
1577                         return -EFAULT;
1578                 }
1579                 *ppos += len;
1580         } else {
1581                 len = 0;
1582         }
1583
1584         kfree(page);
1585         return len;
1586 }
1587
1588
1589 static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
1590 {
1591         struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
1592         char *page;
1593         int ret = -EINVAL;
1594
1595         if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
1596                 return -ENOBUFS;
1597
1598         if (copy_from_user(page, buf, count)) {
1599                 kfree(page);
1600                 return -EINVAL;
1601         }
1602         page[count] = 0;
1603
1604         if (dent->data != NULL) {
1605                 struct prochandler_t *handler = (struct prochandler_t *) dent->data;
1606                 switch (handler->type) {
1607                         case PROC_LED: {
1608                                 struct led_t *led = (struct led_t *) handler->ptr;
1609                                 int p = (led->polarity == NORMAL ? 0 : 1);
1610
1611                                 if (page[0] == 'f') {
1612                                         led->flash = 1;
1613                                         led_flash(0);
1614                                 } else {
1615                                         led->flash = 0;
1616                                         if (led->gpio & GPIO_TYPE_EXTIF) {
1617                                                 led->state = p ^ ((page[0] == '1') ? 1 : 0);
1618                                                 set_led_extif(led);
1619                                         } else {
1620                                                 bcm47xx_gpio_outen(led->gpio, led->gpio);
1621                                                 bcm47xx_gpio_control(led->gpio, 0);
1622                                                 bcm47xx_gpio_out(led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0));
1623                                         }
1624                                 }
1625                                 break;
1626                         }
1627                         case PROC_GPIOMASK:
1628                                 gpiomask = simple_strtoul(page, NULL, 0);
1629
1630                                 if (platform.buttons) {
1631                                         unregister_buttons(platform.buttons);
1632                                         register_buttons(platform.buttons);
1633                                 }
1634
1635                                 if (platform.leds) {
1636                                         unregister_leds(platform.leds);
1637                                         register_leds(platform.leds);
1638                                 }
1639                                 break;
1640                 }
1641                 ret = count;
1642         }
1643
1644         kfree(page);
1645         return ret;
1646 }
1647
1648 static int __init diag_init(void)
1649 {
1650         static struct proc_dir_entry *p;
1651         static struct platform_t *detected;
1652
1653         detected = platform_detect();
1654         if (!detected) {
1655                 printk(MODULE_NAME ": Router model not detected.\n");
1656                 return -ENODEV;
1657         }
1658         memcpy(&platform, detected, sizeof(struct platform_t));
1659
1660         printk(MODULE_NAME ": Detected '%s'\n", platform.name);
1661         if (platform.platform_init != NULL) {
1662                 platform.platform_init();
1663         }
1664
1665         if (!(diag = proc_mkdir("diag", NULL))) {
1666                 printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
1667                 return -EINVAL;
1668         }
1669
1670         if ((p = create_proc_entry("model", S_IRUSR, diag))) {
1671                 p->data = (void *) &proc_model;
1672                 p->proc_fops = &diag_proc_fops;
1673         }
1674
1675         if ((p = create_proc_entry("gpiomask", S_IRUSR | S_IWUSR, diag))) {
1676                 p->data = (void *) &proc_gpiomask;
1677                 p->proc_fops = &diag_proc_fops;
1678         }
1679
1680         if (platform.buttons)
1681                 register_buttons(platform.buttons);
1682
1683         if (platform.leds)
1684                 register_leds(platform.leds);
1685
1686         return 0;
1687 }
1688
1689 static void __exit diag_exit(void)
1690 {
1691         del_timer(&led_timer);
1692
1693         if (platform.buttons)
1694                 unregister_buttons(platform.buttons);
1695
1696         if (platform.leds)
1697                 unregister_leds(platform.leds);
1698
1699         remove_proc_entry("model", diag);
1700         remove_proc_entry("gpiomask", diag);
1701         remove_proc_entry("diag", NULL);
1702 }
1703
1704 module_init(diag_init);
1705 module_exit(diag_exit);
1706
1707 MODULE_AUTHOR("Mike Baker, Felix Fietkau / OpenWrt.org");
1708 MODULE_LICENSE("GPL");