openwrt/target/linux/package/spca5xx/patches/01-kmod-build.patch

   1 diff -ruN spca5xx-20051105-old/Makefile spca5xx-20051105-new/Makefile
   2 --- spca5xx-20051105-old/Makefile       2005-11-05 19:18:26.000000000 +0100
   3 +++ spca5xx-20051105-new/Makefile       2005-12-09 10:34:47.000000000 +0100
   4 @@ -33,7 +33,9 @@
   5  DEFINES   += -DCONFIG_USB_SPCA5XX_MODULE=1 -DMODULE -D__KERNEL__
   6  DEFINES   += -DVID_HARDWARE_SPCA5XX=0xFF -DSPCA5XX_VERSION=\"$(VERSION)\"
   7
   8 -ifneq ($(shell uname -r | cut -d. -f1,2), 2.4)
   9 +KERNELVERSION=$(shell uname -r | cut -d. -f1,2)
  10 +
  11 +ifneq ($(KERNELVERSION), 2.4)
  12
  13  ifneq ($(KERNELRELEASE),)   # We were called by kbuild
  14  CFLAGS += $(DEFINES)
  15 @@ -68,158 +70,19 @@
  16
  17  else   # kernel version test
  18
  19 -#############################################################################
  20 -# For Linux 2.4 users.
  21 -# Change the following lines according to your system configuration.
  22 -# It is important to configure your particular source tree ("make dep") before
  23 -# compiling this module!
  24 -#############################################################################
  25 -###
  26 -# This makefile will build the spca50x driver module external to the kernel
  27 -# source tree. It makes it easier to swap kernels.
  28 -
  29 +EXTRA_CFLAGS += $(DEFINES)
  30
  31 -KERNEL_VERSION = `uname -r`
  32 +spca5xx-objs := drivers/usb/spca5xx.o drivers/usb/spcadecoder.o
  33
  34 -###
  35 -# Location of the header files (most importantly the config files)
  36 -# for the kernel you want to build the module against.
  37 -# This should be correct for the currently installed kernel on your machine.
  38 -KINCLUDE   = /lib/modules/$(KERNEL_VERSION)/build/include
  39 -KERNEL_ACFILE = $(KINCLUDE)/linux/autoconf.h
  40 -KERNEL_MODVERSIONSFILE = $(KINCLUDE)/linux/modversions.h
  41 -MODULE_INSTALLDIR = /lib/modules/$(KERNEL_VERSION)/kernel/drivers/usb/
  42 -
  43 -# Detect module versioning support
  44 -ifneq ($(strip $(shell grep 'define CONFIG_MODVERSIONS 1' $(KERNEL_ACFILE))),)
  45 -       DEFINES += -DMODVERSIONS -include $(KERNEL_MODVERSIONSFILE)
  46 -endif
  47 +obj-m += spca5xx.o
  48 +obj-y := $(spca5xx-objs)
  49
  50 -# Detect SMP support
  51 -ifneq ($(strip $(shell grep 'define CONFIG_SMP 1' $(KERNEL_ACFILE))),)
  52 -       DEFINES += -D__SMP__ -DSMP
  53 -endif
  54 +O_TARGET := $(obj-m)
  55
  56 -# Setup the tools
  57 -CC         = gcc
  58 -LD         = ld
  59 -
  60 -# Setup compiler warnings
  61 -WARNINGS   = -Wall -Wpointer-arith
  62 -WARNINGS  += -Wcast-align -Wwrite-strings -Wstrict-prototypes
  63 -WARNINGS  += -Wuninitialized -Wreturn-type -Wunused -Wparentheses
  64 -
  65 -# Setup compiler flags
  66 -CFLAGS     = -O2 -fomit-frame-pointer -fno-strict-aliasing -pipe
  67 -CFLAGS    += -mpreferred-stack-boundary=2
  68 -CFLAGS    += -I$(KINCLUDE) -Idrivers/usb
  69 -
  70 -# Setup link flags
  71 -LDFLAGS    = --strip-debug -r
  72 -
  73 -# Setup the list of files to be included in a distribution
  74 -DIST_FILES = CHANGELOG \
  75 -             README \
  76 -             Makefile \
  77 -             drivers/usb/Config.in \
  78 -             drivers/usb/spcadecoder.c \
  79 -             drivers/usb/spcadecoder.h \
  80 -             drivers/usb/jpeg_header.h \
  81 -            drivers/usb/jpeg_qtables.h \
  82 -            drivers/usb/spcagamma.h \
  83 -            drivers/usb/spcaCompat.h \
  84 -            drivers/usb/spcausb.h \
  85 -             drivers/usb/spca500_init.h \
  86 -             drivers/usb/spca501_init.h \
  87 -            drivers/usb/sp5xxfw2.dat \
  88 -             drivers/usb/sp5xxfw2.h \
  89 -             drivers/usb/spca505_init.h \
  90 -             drivers/usb/spca506.h \
  91 -             drivers/usb/spca508_init.h \
  92 -            drivers/usb/spca561.h \
  93 -            drivers/usb/sonix.h \
  94 -             drivers/usb/cs2102.h \
  95 -             drivers/usb/hv7131b.h \
  96 -            drivers/usb/icm105a.h \
  97 -             drivers/usb/hv7131c.h \
  98 -            drivers/usb/hdcs2020.h \
  99 -             drivers/usb/pb0330.h \
 100 -            drivers/usb/tas5130c.h \
 101 -            drivers/usb/zc3xx.h\
 102 -            drivers/usb/tv8532.h\
 103 -            drivers/usb/cxlib.h\
 104 -            drivers/usb/sn9cxxx.h\
 105 -            drivers/usb/cx11646.h\
 106 -            drivers/usb/pac207.h\
 107 -            drivers/usb/spca5xx.c \
 108 -             drivers/usb/spca5xx.h
 109 -
 110 -OBJS       = drivers/usb/spcadecoder.o \
 111 -             drivers/usb/spca5xx.o
 112 -
 113 -BINARY     = spca5xx.o
 114 -
 115 -###
 116 -# Targets follow here
 117 -
 118 -binary:        $(OBJS)
 119 -       @echo Linking $(BINARY)
 120 -       @$(LD) $(LDFLAGS) -o $(BINARY) $(OBJS)
 121 -
 122 -install: binary
 123 -       @echo Installing.. Your root password may be required.
 124 -       su -c "make install-root"
 125 -
 126 -install-root:
 127 -       @echo Installing..
 128 -       @mkdir -p /lib/modules/`uname -r`/kernel/drivers/usb
 129 -       @rm -f /lib/modules/`uname -r`/kernel/drivers/usb/spca50x.o
 130 -       @rm -f /lib/modules/`uname -r`/kernel/drivers/usb/et61x.o
 131 -       @cp spca5xx.o /lib/modules/`uname -r`/kernel/drivers/usb/spca5xx.o
 132 -       @/sbin/depmod
 133 -
 134 -dist:  clean binary
 135 -       @echo Making distributable archives
 136 -       @rm -f spca5xx-src-$(VERSION).tar.gz
 137 -       @tar zcf spca5xx-src-$(VERSION).tar.gz $(DIST_FILES)
 138 -       @rm -f spca5xx-module-$(VERSION).tar.gz
 139 -       @cp $(BINARY) spca5xx-$(VERSION).o
 140 -       @tar zcf spca5xx-module-$(VERSION).tar.gz spca5xx-$(VERSION).o README
 141 -       @rm spca5xx-$(VERSION).o
 142 -
 143 -.c.o:  Makefile $*.c
 144 -       @echo Compiling $*.c
 145 -       @$(CC) $(CFLAGS) $(WARNINGS) $(DEFINES) -c $*.c -o $*.o
 146 -
 147 -###
 148 -# Dependencies follow here
 149 -
 150 -drivers/usb/spca5xx.o: drivers/usb/spca5xx.h \
 151 -                      drivers/usb/spcaCompat.h \
 152 -                      drivers/usb/spcausb.h \
 153 -                      drivers/usb/sonix.h \
 154 -                       drivers/usb/spca500_init.h \
 155 -                       drivers/usb/spca501_init.h \
 156 -                      drivers/usb/sp5xxfw2.h \
 157 -                       drivers/usb/spca505_init.h \
 158 -                      drivers/usb/spca506.h \
 159 -                       drivers/usb/spca508_init.h \
 160 -                      drivers/usb/spca561.h \
 161 -                      drivers/usb/zc3xx.h\
 162 -                      drivers/usb/tv8532.h\
 163 -                      drivers/usb/cx11646.h\
 164 -                      drivers/usb/mr97311.h\
 165 -                      drivers/usb/sn9cxxx.h\
 166 -                      drivers/usb/pac207.h\
 167 -
 168 -
 169 -drivers/usb/spcadecoder.o: drivers/usb/spcadecoder.h \
 170 -                          drivers/usb/spcagamma.h \
 171 -                           drivers/usb/jpeg_header.h
 172 +-include $(TOPDIR)/Rules.make
 173
 174  endif  # End kernel version test
 175
 176 -
 177  ##############################################################################
 178  # OTHER TARGETS
 179  ##############################################################################