Hans Dedecker [Fri, 2 Mar 2018 15:25:13 +0000 (16:25 +0100)]
Revert "dhcpv4: make dhcpv4 support optional"
This reverts commit
53f52e3ea1d941941f0baf317816d2c25135161e.
Hans Dedecker [Fri, 2 Mar 2018 15:25:04 +0000 (16:25 +0100)]
Revert "CMakeLists: fix label mismatch"
This reverts commit
3a1210f5573216582302d0802c7922b323da43bb.
Hans Dedecker [Tue, 20 Feb 2018 10:23:25 +0000 (11:23 +0100)]
dhcpv6-ia: don't always send reconf accept option (FS#1377)
Send reconfigure accept and reconfigure key authentication protocol options
only if the client indicates it supports reconfigure accept as descibed
in RFC3315 paragraph 21.5.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 25 Nov 2017 08:45:30 +0000 (09:45 +0100)]
CMakeLists: fix label mismatch
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sun, 5 Nov 2017 21:39:58 +0000 (22:39 +0100)]
dhcpv4: make dhcpv4 support optional
Hans Dedecker [Thu, 11 May 2017 09:08:48 +0000 (11:08 +0200)]
config: fix dhcpv4 server being started
In case maindhcp is set to disabled in global config one expect the DHCPv4
server not being started irrespective if the dhcpv4 interface config is set
to server.
Fix this by keeping maindhcp config apart from the legacy config parameter
as already documented in the README.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 2 Aug 2017 20:32:08 +0000 (22:32 +0200)]
dhcpv6: assign all viable DHCPv6 addresses by default (FS#402, FS#524)
Some client implementations expect DHCPv6 addresses to be assigned for
every prefix present in a RA as reported in FS#524; if not done the
client implementations spam the DHCPv6 server with SOLICIT messages
trying to get an DHCPv6 address for every prefix.
When ra_managed is set to 1 and an ULA prefix is configured; the DHCPv6
server will only assign an ULA DHCPv6 addresses which possibly leads to
DNS issues.
Fix these problems by providing dhcpv6_assignall config option which
assigns all viable DHCPv6 addresses to a client by default.
This is a trade off as it means client implementations will be assigned
more IPv6 addresses and lose the ability to quickly renumber clients
which don't support reconfigure accept in case of wan prefix change
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 28 Apr 2017 08:20:13 +0000 (10:20 +0200)]
ndp: don't trigger IPv6 ping when neighbor entry is invalid
A ping for an IPv6 address not present on an interface will generate a
netlink neighbor message with as status fail; launching again an IPv6
ping on other proxy enabled interfaces will create a cascade effect of
netlink neighbor messages with as status fail which in its turn will
again trigger an IPv6 ping on proxy enabled interfaces ...
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 28 Apr 2017 07:58:54 +0000 (09:58 +0200)]
ndp: fix adding proxy neighbor entries
Proxy neighbor entries were not created for proxy enabled interfaces
if the first interface was not enabled
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 27 Apr 2017 16:16:11 +0000 (18:16 +0200)]
ndp: fix wrong interface name in syslog message
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 26 Apr 2017 07:56:06 +0000 (09:56 +0200)]
dhcpv6-ia: Fix segfault when writing DHCPv4 leases in state file
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 25 Apr 2017 12:50:18 +0000 (14:50 +0200)]
ubus: don't segfault when there're no leases
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 21 Apr 2017 14:23:04 +0000 (16:23 +0200)]
ubus: rework dumping IPv6 and IPv4 leases
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 13 Apr 2017 20:24:20 +0000 (22:24 +0200)]
dhcpv6-ia: simplify logic to write statefile and dhcpv6 logging
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 12 Apr 2017 14:35:21 +0000 (16:35 +0200)]
dhcpv6-ia: create assignment for unknown IA in rebind messages
Create assignment for unknown identity association in rebind messages which is
equivalent to the handling of identity association for solicit/request messages.
However don't consider identity associations in rebind messages as a request so
that addresses/prefixes which are not apropriate for the link are returned with
lifetimes of 0.
This aligns with the behavior of the ISC DHCPv6 server.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 29 Mar 2017 15:03:29 +0000 (17:03 +0200)]
rework IPv6 dns address selection (FS#635)
Don't return anymore the link local IPv6 address as DNS IPv6 address
since different OS implementations (e.g. android, ...) cannot handle
a link local IPv6 address as DNS address.
IPv6 DNS address selection is reworked as follows :
-Consider all global/ULA IPv6 address having a valid lifetime
-Give preference to global/ULA IPv6 addresses being not deprecated
-Give preference to ULA IPv6 addresses over IPv6 global addresses
-Give preference to the IPv6 address with the longest preferred lifetime in
its selected category (ULA or global)
-If no global/ULA IPv6 address is present use the IPv6 link local address
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 29 Mar 2017 14:47:52 +0000 (16:47 +0200)]
ndp: keep an exact copy of IPv6 interface addresses
Don't reset the final 32 bit IPv6 host suffix when storing the IPv6 addresses
in the interface structure. This will allow exact lookup aand return of IPv6
addresses stored in the interface structure when needed.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 28 Mar 2017 14:44:50 +0000 (16:44 +0200)]
ndp: code cleanup
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 27 Mar 2017 20:01:13 +0000 (22:01 +0200)]
rework IPv6 address dump logic
Make the code more logical by moving the IPv6 address dump logic into the
different protocol interface enable handlers so it's clear which protocols
require interface IPv6 address tracking.
At the same time restructure the IPv6 address dump logic so less IPv6 address
netlink dumps are created.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 9 Mar 2017 14:49:03 +0000 (15:49 +0100)]
ndp: add syslog debug tracing
Add extra LOG_DEBUG syslog tracing for trouble shooting
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Florian Fainelli [Wed, 1 Mar 2017 05:48:29 +0000 (21:48 -0800)]
dhcpv6-ia: Check lockf return value
Check the lockf return value to fix the following warning/error:
/home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/odhcpd-2017-02-21-
1b630f8b/src/dhcpv6-ia.c: In function 'dhcpv6_write_statefile':
/home/fainelli/dev/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/odhcpd-2017-02-21-
1b630f8b/src/dhcpv6-ia.c:246:8: error: ignoring return value of 'lockf', declared with attribute warn_unused_result [-Werror=unused-result]
lockf(fd, F_LOCK, 0);
^
cc1: all warnings being treated as errors
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Hans Dedecker [Tue, 21 Feb 2017 08:54:36 +0000 (09:54 +0100)]
router: don't announce prefixes with valid lifetime equal to 0
Don't set prefix valid lifetime to 0 in case the preferred lifetime
equals 0 and valid lifetime gets smaller than 7200.
In corner cases it leads to router lifetime being set although no
prefixes are announced with a valid lifetime different from 0.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 20 Feb 2017 16:19:06 +0000 (17:19 +0100)]
router: fix arithmetic exception fault
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 20 Feb 2017 14:31:48 +0000 (15:31 +0100)]
router: allow RA prefix lifetime being set to leasetime value (FS#397)
Add config option ra_useleasetime which allows the RA prefix lifetime
being set to the leasetime in case the valid and/or preferred prefix
lifetime is bigger than the configured leasetime.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sun, 19 Feb 2017 21:00:38 +0000 (22:00 +0100)]
treewide: simplify dhcp leasetime checking
Set dhcp leasetim to 43200 seconds for all interfaces independant
if dhcpv4 is enabled for an interface. Minimum allowed leasetime
is 60 seconds when parsing leastime configuration; this allows to
clean up the awkward leasetime checks on different places in the code
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 16 Feb 2017 11:20:08 +0000 (12:20 +0100)]
router: support ra_mininterval and ra_lifetime uci parameters (FS#397)
Add support for uci parameters ra_mininterval and ra_lifetime as described
in RFC4861 paragraph 6.2.1.
Variable ra_mininterval allows to configure the minimum interval time
between unsolicited router advertisement messages; default value is
200 seconds. The minimum allowed value is 4 seconds while the maximum
value is limited to 0.75 of the maximum interval time.
The calculation of the maximum interval time between unsolicited
router advertisement messages has been reworked. The default value is 600
seconds as specified in RFC4861; if the maximum interval time exceeds
0.33 * the minimal valid lifetime of all IPv6 prefixes it will be limited
to 0.33 * the minimal valid lifetime of all IPv6 prefixes
Variable ra_lifetime allows to configure the Router Lifetime field
in the router advertisement messages; the value is either 0 or a value
between the maximum interval time and 9000 seconds. If the router lifetime
is smaller than the RA maximum interval it will be set equal to the RA
maximum interval time.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 15 Feb 2017 13:12:55 +0000 (14:12 +0100)]
router.h: fix alignment style
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 15 Feb 2017 13:11:35 +0000 (14:11 +0100)]
Revert "odhcpd.h: fix alignment style"
This reverts commit
62ea54f5db4c636710781056541c4b85d043bef8.
Hans Dedecker [Wed, 15 Feb 2017 12:51:56 +0000 (13:51 +0100)]
odhcpd.h: fix alignment style
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 14 Feb 2017 10:59:14 +0000 (11:59 +0100)]
config: make loglevel configurable via uci (FS#481)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 13 Feb 2017 08:29:12 +0000 (09:29 +0100)]
odhcpd: display correct default log level in usage text
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 10 Feb 2017 16:03:49 +0000 (17:03 +0100)]
treewide: define and use macro IN6_IS_ADDR_ULA
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 10 Feb 2017 09:57:34 +0000 (10:57 +0100)]
ndp: deregister netlink event socket for non recoverable errors
Deregister netlink event socket in case of error different
from ENOBUFS or failure to set netlink rx buffer size
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 10 Feb 2017 09:24:20 +0000 (10:24 +0100)]
odhcpd: fix white space errors
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 9 Feb 2017 15:52:50 +0000 (16:52 +0100)]
ndp: harden netlink event socket error handling
Start with a netlink receive buffersize of 130k for the netlink event socket;
double the netlink receive buffer size in case an ENOBUFS is reported.
Also align function naming and its parameters.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 9 Feb 2017 14:25:35 +0000 (15:25 +0100)]
ndp: close proc file descriptor also during error handling
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 1 Feb 2017 09:44:51 +0000 (10:44 +0100)]
npd: rework IPv6 relay logic (FS#396)
Rework the IPv6 relay logic to make it more robust by making
use of libnltiny to process netlink messages.
At the same time reimplement the IPv6 relay finite state machine
to make the relay logic less error prone
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 8 Feb 2017 15:36:02 +0000 (16:36 +0100)]
config: restore interface defaults when cleaning interface
Interface defaults are whiped when clean interface is executed
resulting into loss of default behavior for the ndproxy_routing
and ra_management uci parameters
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 1 Feb 2017 09:44:51 +0000 (10:44 +0100)]
dhcpv6-ia: apply lease delete based on assignment bound state
Make adding and removing of routes via apply_lease dependant
on the assignment bound state as it makes no sense to delete
routes for an assignment which is not bound.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 31 Jan 2017 21:11:20 +0000 (22:11 +0100)]
odhcpd: properly handle netlink messages (FS#388)
Use libnl-tiny to construct and process netlink messages when
manipulating IPv6 routes and fetching IPv6 addresses.
This fixes lingering netlink error messages on the netlink socket
in case route deletion failed causing fetching of IPv6 addresses
to be aborted and odhcpd faultly assuming no IPv6 addresses being
present on the interface.
Hans Dedecker [Tue, 31 Jan 2017 21:07:08 +0000 (22:07 +0100)]
odhcpd: fix coding style
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 26 Jan 2017 17:32:14 +0000 (18:32 +0100)]
odhcpd: decrease default log level to LOG_INFO
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 26 Jan 2017 17:29:09 +0000 (18:29 +0100)]
odhcpd: rework IPv6 interface address dump
Rework the IPv6 address dump logic to make it more robust
and generate syslog traces in case of error situations
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 26 Jan 2017 14:23:36 +0000 (15:23 +0100)]
odhcpd: extra syslog tracing
Add extra syslog tracing for trouble shooting
and make some syslog traces more self explaining
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 24 Jan 2017 08:31:24 +0000 (09:31 +0100)]
router: fix compile issue on 64 bit systems
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 24 Jan 2017 08:22:55 +0000 (09:22 +0100)]
Revert "router: fix compile issue on 64 targets"
This reverts commit
70fbf936839e02d526929be06ecba3059f78be3c.
Hans Dedecker [Tue, 24 Jan 2017 08:06:22 +0000 (09:06 +0100)]
router: fix compile issue on 64 targets
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 23 Jan 2017 16:54:42 +0000 (17:54 +0100)]
router: convert syslog lifetime traces into LOG_INFO prio
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 23 Jan 2017 16:29:43 +0000 (17:29 +0100)]
treewide: rework prio of syslog messages
Rework prio of syslog messages allowing to filter out the relevant messages
by setting the correct log level
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 23 Jan 2017 15:49:15 +0000 (16:49 +0100)]
ndp: code cleanup
ia_reconf is only set but nowhere used; so let's remove it ...
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 21 Jan 2017 16:07:54 +0000 (17:07 +0100)]
router: add syslog debug tracing for trouble shooting
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 21 Jan 2017 15:27:17 +0000 (16:27 +0100)]
treewide: use RELAYD_MAX_ADDRS as address array size
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 21 Jan 2017 14:40:13 +0000 (15:40 +0100)]
ndp: don't scan netlink attributes in case of netlink route event
In case a netlink route event is received for a default route
netlink data attributes were faulty processed as neigbor netlink
data. Fix this by not processing any netlink attribute for
any route event.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 6 Jan 2017 14:26:17 +0000 (15:26 +0100)]
dhcpv6-ia: filter out prefixes having invalid length
Function append_reply filters out addresses having invalid prefix length
when constructing prefixes being delegated to a client.
Now also filter out addresses with an invalid prefix length when writing
the delegated prefixes in the statefile and during logging of the delegated
prefixes.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 5 Jan 2017 15:03:35 +0000 (16:03 +0100)]
dhcpv6-ia: fix dereference after freeing assignment
Fix assignment dereference by dhcpv6_log in case
the assignment is freed when nothing has been
assigned.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 5 Jan 2017 14:06:07 +0000 (15:06 +0100)]
dhcpv6-ia: log only IPv6 addresses which are effectively assigned to a DHCPv6 client
Fix displaying IPv6 addresses which were not assigned to a DHCPv6 client
Clean up the code by using macro ADDR_ENTRY_VALID_IA_ADDR on different
places to align the checks.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Tue, 3 Jan 2017 13:09:08 +0000 (14:09 +0100)]
config: respect ignore uci option
The odhcpd documentation currently implies that "option ignore 1" in a section
of type "dhcp" will disable any services on the referenced interface while the
code actually ignores the setting when initializing referenced interfaces.
This commonly leads to situations where users think that "option disabled"
will prevent any server activity on a given interface while in reality odhcpd
effectively acts as rogue DHCPv6 server in its default configuration.
To fully inhibit any activity, one has to specify both "option ignore 1" as
well as "option ra disabled", "option ndp disabled" and
"option dhcpv6 disabled" which is highly counter intuitive at best.
A previous commit (
5f425ed Respect interface "ignore" settings as documented.)
attempted to address the problem by observing the value of i->ignore instead
of unconditionally enabling all protocols but broke the ability to use DHCPv6
relay mode while having DHCPv4 disabled.
This patch changes ...
- the enabling of services on an interface to use the value of the ignore
option as default choice instead of hardcoding "true"
- the options "ra", "ndp", "dhcpv4" and "dhcpv6" to take precedence over the
default "ignore" state to allow selectively enabling services on ignored
interfaces
- the README to clarify the fact that "ra", "ndp", "dhcpv4" and "dhcpv6" can
now override "option ignore"
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Karl Palsson <karlp@etactica.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 3 Jan 2017 09:42:19 +0000 (10:42 +0100)]
dhcpv6-ia: fix static assignment check
Fix static assignment check failure which was
introduced in commit
561890e
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 16:13:09 +0000 (17:13 +0100)]
dhcpv6-ia: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 16:10:14 +0000 (17:10 +0100)]
dhcpv6-ia: update valid_until only for non static DHCPv6 leases
Update valid_until lifetime only for non static DHCPv6 leases otherwise
the lifetime of a static lease is not infinite anymore
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 15:29:14 +0000 (16:29 +0100)]
dhcpv4: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 31 Dec 2016 09:26:49 +0000 (10:26 +0100)]
README: Add host leasetime uci parameter
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 19:52:05 +0000 (20:52 +0100)]
dhcpv6-ia: fix invalid IPv6/hostname entries in statefile
Statefull IPv6 addresses are assigned to DHCPv6 clients from a
local prefix based on criteria which need to be fulfilled.
One of those criteria requires the IPv6 address still having
preferred lifetime which was not checked when constructing
the contents of the statefile.
Another criteria requires the prefix length not being smaller
than or equal to 64 when ra_management equals 0 or 1 which was
neither correctly checked when constructing the statefile.
This can lead to invalid hostname/IPv6 entries in the statefile
and thus possible connectivity issues when using DNS resolving.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 16:44:44 +0000 (17:44 +0100)]
dhcpv6-ia: fix delete logic of an assignment in reconf_timer
Function free_dhcpv6_assignment already removes the assignment in
the list so there's no need to call list_del in reconf_timer
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 16:34:01 +0000 (17:34 +0100)]
dhcpv6-ia : code style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 14:17:13 +0000 (15:17 +0100)]
config: use free_lease to delete a lease
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 13:12:08 +0000 (14:12 +0100)]
config: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 11:33:39 +0000 (12:33 +0100)]
config: Create statefile dir
Create statefile dir if the specified dir does not yet exist
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:23:55 +0000 (23:23 +0100)]
dhcpv6-ia: use free_dhcpv6_assignment where needed
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:18:54 +0000 (23:18 +0100)]
dhcpv6-ia: make free_dhcpv6_assignment static
Further align coding style
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:07:47 +0000 (23:07 +0100)]
dhcpv4: make dhcpv4_msg_to_string static
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 09:57:30 +0000 (10:57 +0100)]
dhcpv4: fix DHCPv4 hostname handling
Fix hostname not being reported as "-" in the DHCP statefile in case
no hostname is reported by the DHCPv4 client
(https://:wqgithub.com/openwrt/odhcpd/issues/94)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 15 Dec 2016 21:37:47 +0000 (22:37 +0100)]
Limit lifetime of non-static leases in case of release and decline
In case infinite leasetime is assigned to a non static DHCPv4/v6 lease
override the infinite lifetime of the lease when either a DHCPv4/v6
decline or release is received.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Stijn Tintel [Tue, 27 Dec 2016 08:40:21 +0000 (09:40 +0100)]
Revert "Respect interface "ignore" settings as documented."
This reverts commit
5f425ed1e5f92397e27ec4f44820b6ef677b8134.
Both dnsmasq and odhcpd use the ignore option. This is fine for normal
operation, but it breaks DHCPv6 relay when dnsmasq is disabled on the
wan interface.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Sun, 14 Aug 2016 17:22:57 +0000 (20:22 +0300)]
router: skip parse_routes when ra_default > 1
It does not make sense to scan the entire routing table if the decision
will be overridden afterwards.
This makes it possible to use odhcpd on a router with full IPv6 BGP
table, by setting ra_default to 2. Without this change, odhcpd is
constantly busy reading /proc/net/ipv6_route, and doesn't respond to
router solicitations in time.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Hans Dedecker [Wed, 14 Dec 2016 21:22:22 +0000 (22:22 +0100)]
Don't print non bound assignments in the state file
Set bound flag for DHCPv4 and DHCPv6 assignments when the IPv6/IPv4 address
is leased to a client.
This will prevent the printing of leases and hostname/IPv4/IPv6 address
combinations in the state file for for which the IPv4/6 address has not
been assigned.
Also this will fix the printing of assignments which have been declined
by the clients
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 5 Dec 2016 08:57:12 +0000 (09:57 +0100)]
config: Fix RA interface config being overwritten
In case multiple dhcp uci sections are configured and one section contains
RA config while the other section does not; the RA interface config of the
first section will be overwritten by the second section.
Fix this by setting the default values for ra_management and ndp_proxy_routing
uci parameters when the interface is created and by removing the overwrite check
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 1 Dec 2016 13:24:24 +0000 (14:24 +0100)]
dhcpv6-ia : Fix static DHCPv6 assignments becoming non static
The valid_until parameter which is set to 0 for static DHCPv6
assignments was overwritten depending on the received DHCPv6 message
which turned the assignment into having a finite lifetime and thus not
static anymore.
Fix this by checking if the valid_until parameter holds infinite
lifetime before updating it.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 1 Dec 2016 13:24:23 +0000 (14:24 +0100)]
dhcpv6-ia: Fix assignment of static DHCPv6 leases
Fix assignment of static DHCPv6 leases which was broken
by commit
6c3bc0141dacc88992583d6f2cdc8a360df7422d.
At the same time fix lifetime check of existing assignments
having a finite lifetime
Fixes FS#309
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Florian Fainelli [Sat, 2 Jul 2016 00:05:17 +0000 (17:05 -0700)]
cmake: Find libubox/uloop.h
Add a CMake FIND_PATH and INCLUDE_DIRECTORIES searching for
libubox/uloop.h. Some external toolchains which do not include standard
locations would fail to find the header otherwise.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Hans Dedecker [Mon, 21 Nov 2016 13:42:16 +0000 (14:42 +0100)]
odhcpd: Display infinite valid lifetime as -1
Display infinite valid lifetime as -1 both in ubus
and statefile
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Karl Palsson [Wed, 28 Sep 2016 16:32:41 +0000 (16:32 +0000)]
Respect interface "ignore" settings as documented.
The "ignore" option is correctly loaded. Actually observe it as
documented.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Karl Palsson [Wed, 28 Sep 2016 16:32:39 +0000 (16:32 +0000)]
enable loglevel setting via command line
Currently the loglevel is hardcoded to LOG_WARNING, even though there is
debug log messages. Allow setting the loglevel via cli option.
Include basic help text because we're adding command line options.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Hans Dedecker [Thu, 17 Nov 2016 15:12:00 +0000 (16:12 +0100)]
dhcpv4: Adding DHCP client leasetime request support
Add support for DHCPv4 clients proposing a leasetime;
proposed leasetime will be accepted if it does not
exceed either the pool or configured lease leastime.
Further rework the duplicated leasetime logic which
was in place.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:59 +0000 (16:11 +0100)]
dhcpv6-ia: Display infinite lifetime as INT32_MAX in state file
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:58 +0000 (16:11 +0100)]
ubus: Fix displayed valid paramater for both DHCPv4 and DHCPv6 lease
Fix ubus valid parameter being displayed as a negative number;
also display infinite lifetime as INT32_MAX
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:57 +0000 (16:11 +0100)]
dhcpv4: Keep DHCPv4 assignment lifetime value in sync with assigned leasetime
Keep the valid_until assignment parameter in sync with the
leasetime assigned to the DHCP client when handling DHCP
request message.
This guarantees the contents of the ubus dhcp ipv4leases valid
parameter is in sync with the client leasetime
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:56 +0000 (16:11 +0100)]
config: Support infinite as DHCP pool leasetime value
Add support for infinite leasetime value; this can be done by
specifying "infinite" as leasetime value which is similar to
dnsmasq infinite leasetime support.
Specifying "infinite" as leasetime is valid for both the host
and dhcp uci sections.
A DHCPv4/DHCPv6 assignment is now considered infinite if valid_unil
holds the value 0.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Massimiliano Stucchi [Wed, 22 Jun 2016 08:22:41 +0000 (10:22 +0200)]
Correct a typo
Karl Palsson [Thu, 22 Sep 2016 17:32:18 +0000 (17:32 +0000)]
odhcpd: remove superfluous log output.
Drop pointless syslog. The single line just doubles the amount of lines
logged to syslog without adding any value.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Steven Barth [Thu, 19 May 2016 06:54:24 +0000 (08:54 +0200)]
Add per-host leasetime support
Patch by Daniel Dickinson
Signed-off-by: Steven Barth <steven@midlink.org>
Steven Barth [Sun, 31 Jan 2016 15:19:05 +0000 (16:19 +0100)]
Merge pull request #68 from dedeckeh/bugfixes
config: blobmsg_check_attr expects bool type as last argument
Hans Dedecker [Tue, 15 Dec 2015 14:32:33 +0000 (15:32 +0100)]
config: blobmsg_check_attr expects bool type as last argument
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Steven Barth [Sun, 29 Nov 2015 11:51:28 +0000 (12:51 +0100)]
Merge pull request #67 from dedeckeh/bugfixes
Fix interface ifname overwrite in case UCI dhcp section contains ifname or networkid parameter
Hans Dedecker [Fri, 27 Nov 2015 12:34:01 +0000 (13:34 +0100)]
config: Prioritize ifname resolving via ubus over ifname/networkid attributes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 27 Nov 2015 10:30:41 +0000 (11:30 +0100)]
config: Close interface when ifindex cannot be resolved
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Steven Barth [Tue, 17 Nov 2015 07:44:07 +0000 (08:44 +0100)]
fall through in error case to clear congestion
Steven Barth [Mon, 16 Nov 2015 11:10:24 +0000 (12:10 +0100)]
Handle netlink ENOBUFS events
Steven Barth [Wed, 21 Oct 2015 06:47:26 +0000 (08:47 +0200)]
Merge pull request #63 from willmo/router-lifetime
Clamp router lifetime per RFC 4861
Will Mortensen [Mon, 19 Oct 2015 03:50:56 +0000 (20:50 -0700)]
Don't overflow router lifetime
When a prefix lifetime was greater than UINT16_MAX, we would advertise a
shorter router lifetime (even potentially 0). Saturate instead.