+msgstr "« 后退"
+
+#~ msgid "Ad-hoc mode"
+#~ msgstr "Ad-hoc模式"
+
+#~ msgid "HE.net user ID"
+#~ msgstr "HE.net用户ID"
+
+#~ msgid "This is the 32 byte hex encoded user ID, not the login name"
+#~ msgstr "这是32 byte hex编码的用户ID，不是登录名"
+
+#~ msgid "40MHz 2nd channel above"
+#~ msgstr "40MHz HT40+ (仅1-7频道可用）"
+
+#~ msgid "40MHz 2nd channel below"
+#~ msgstr "40MHz HT40- (仅5-13频道可用）"
+
+#~ msgid "Accept router advertisements"
+#~ msgstr "接收路由通告"
+
+#~ msgid "Advertise IPv6 on network"
+#~ msgstr "在网络上通告IPv6"
+
+#~ msgid "Advertised network ID"
+#~ msgstr "通告的网络ID"
+
+#~ msgid "Allowed range is 1 to 65535"
+#~ msgstr "允许的范围：1 到 65535"
+
+#~ msgid "HT capabilities"
+#~ msgstr "HT功能"
+
+#~ msgid "HT mode"
+#~ msgstr "HT模式"
+
+#~ msgid "Router Model"
+#~ msgstr "主机型号"
+
+#~ msgid "Router Name"
+#~ msgstr "系统名称"
+
+#~ msgid "Send router solicitations"
+#~ msgstr "发送路由请求"
+
+#~ msgid "Specifies the advertised preferred prefix lifetime in seconds"
+#~ msgstr "指定通告的首选前缀生存时间(秒)"
+
+#~ msgid "Specifies the advertised valid prefix lifetime in seconds"
+#~ msgstr "指定通告的有效前缀生存时间(秒)"
+
+#~ msgid "Use preferred lifetime"
+#~ msgstr "使用首选生存时间"
+
+#~ msgid "Use valid lifetime"
+#~ msgstr "使用有效生存时间"
+
+#~ msgid "Waiting for router..."
+#~ msgstr "等待路由器..."
+
+#~ msgid "Enable builtin NTP server"
+#~ msgstr "开启内置NTP服务器"
+
+#~ msgid "Active Leases"
+#~ msgstr "活动的租约"
+
+#~ msgid "Open"
+#~ msgstr "打开"
+
+#~ msgid "KB"
+#~ msgstr "KB"
+
+#~ msgid "Bit Rate"
+#~ msgstr "比特率"
+
+#~ msgid "Configuration / Apply"
+#~ msgstr "设置 /应用"
+
+#~ msgid "Configuration / Changes"
+#~ msgstr "设置 / 修改"
+
+#~ msgid "Configuration / Revert"
+#~ msgstr "设置 / 重置"
+
+#~ msgid "MAC"
+#~ msgstr "MAC"
+
+#~ msgid "MAC Address"
+#~ msgstr "MAC地址"
+
+#~ msgid "<abbr title=\"Encrypted\">Encr.</abbr>"
+#~ msgstr "<abbr title=\"Encrypted\">加密</abbr>"
+
+#~ msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
+#~ msgstr "搜索<abbr title=\"Wireless Local Area Network\">WLAN</abbr>"
+
+#~ msgid ""
+#~ "Choose the network you want to attach to this wireless interface. Select "
+#~ "<em>unspecified</em> to not attach any network or fill out the "
+#~ "<em>create</em> field to define a new network."
+#~ msgstr ""
+#~ "请选择你需要链接到无线网络接口的网络. 如果不链接到任何网络请选择 <em>未指"
+#~ "定</em>,如果需要创建新网络请点<em>创建</em>."
+
+#~ msgid "Create Network"
+#~ msgstr "创建一个网络"
+
+#~ msgid "Link"
+#~ msgstr "链接"
+
+#~ msgid "Networks"
+#~ msgstr "网络"
+
+#~ msgid "Power"
+#~ msgstr "Power"
+
+#~ msgid "Wifi networks in your local environment"
+#~ msgstr "扫描到的无线热点"
+
+#~ msgid ""
+#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
+#~ "address/prefix"
+#~ msgstr ""
+#~ "<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: "
+#~ "address/prefix"
+
+#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Server"
+#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-服务器"
+
+#~ msgid "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"
+#~ msgstr "<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-广播"
+
+#~ msgid "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"
+#~ msgstr "<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-地址"
+
+#~ msgid "IP-Aliases"
+#~ msgstr "IP-Aliases"
+
+#~ msgid "IPv6 Setup"
+#~ msgstr "IPv6 设置"
+
+#~ msgid ""
+#~ "Note: If you choose an interface here which is part of another network, "
+#~ "it will be moved into this network."
+#~ msgstr ""
+#~ "注意：当你选择一个已经存在与一个网络中的接口时，它将会被移除那个网络。"
+
+#~ msgid ""
+#~ "Really delete this interface? The deletion cannot be undone!\\nYou might "
+#~ "lose access to this router if you are connected via this interface."
+#~ msgstr ""
+#~ "Really delete this interface? The deletion cannot be undone!\n"
+#~ "You might lose access to this router if you are connected via this "
+#~ "interface."
+
+#~ msgid ""
+#~ "Really delete this wireless network? The deletion cannot be undone!\\nYou "
+#~ "might lose access to this router if you are connected via this network."
+#~ msgstr ""
+#~ "Really delete this wireless network? The deletion cannot be undone!\n"
+#~ "You might lose access to this router if you are connected via this "
+#~ "network."
+
+#~ msgid ""
+#~ "Really shutdown interface \"%s\" ?\\nYou might lose access to this router "
+#~ "if you are connected via this interface."
+#~ msgstr ""
+#~ "Really shutdown interface \"%s\" ?\n"
+#~ "You might lose access to this router if you are connected via this "
+#~ "interface."
+
+#~ msgid ""
+#~ "Really shutdown network ?\\nYou might lose access to this router if you "
+#~ "are connected via this interface."
+#~ msgstr ""
+#~ "Really shutdown network ?\n"
+#~ "You might lose access to this router if you are connected via this "
+#~ "interface."
+
+#~ msgid ""
+#~ "The network ports on your router can be combined to several <abbr title="
+#~ "\"Virtual Local Area Network\">VLAN</abbr>s in which computers can "
+#~ "communicate directly with each other. <abbr title=\"Virtual Local Area "
+#~ "Network\">VLAN</abbr>s are often used to separate different network "
+#~ "segments. Often there is by default one Uplink port for a connection to "
+#~ "the next greater network like the internet and other ports for a local "
+#~ "network."
+#~ msgstr ""
+#~ "本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</"
+#~ "abbr>，并支持电脑间的直接通讯；<abbr title=\"Virtual Local Area Network"
+#~ "\">VLAN</abbr>也常用于分割不同网段；默认通常是一条上传端口连接ISP，其余端"
+#~ "口为本地子网。"
+
+#~ msgid "Enable buffering"
+#~ msgstr "开启缓冲"
+
+#~ msgid "IPv6-over-IPv4"
+#~ msgstr "IPv6-over-IPv4"
+
+#~ msgid "Custom Files"
+#~ msgstr "自定义文件"
+
+#~ msgid "Custom files"
+#~ msgstr "自定义文件"
+
+#~ msgid "Detected Files"
+#~ msgstr "查询到的文件"
+
+#~ msgid "Detected files"
+#~ msgstr "查询到的文件"
+
+#~ msgid "Files to be kept when flashing a new firmware"
+#~ msgstr "更新固件时被保存的文件"
+
+#~ msgid "General"
+#~ msgstr "基本信息"
+
+#~ msgid ""
+#~ "Here you can customize the settings and the functionality of <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
+#~ "件和功能。"
+
+#~ msgid "Post-commit actions"
+#~ msgstr "Post-commit操作"
+
+#~ msgid ""
+#~ "The following files are detected by the system and will be kept "
+#~ "automatically during sysupgrade"
+#~ msgstr "更新固件时要保存的文件"
+
+#~ msgid ""
+#~ "These commands will be executed automatically when a given <abbr title="
+#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
+#~ "allowing changes to be applied instantly."
+#~ msgstr ""
+#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
+#~ "后，这些命令将被自动执行。"
+
+#~ msgid ""
+#~ "This is a list of shell glob patterns for matching files and directories "
+#~ "to include during sysupgrade"
+#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
+
+#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
+#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
+
+#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
+#~ msgstr ""
+#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
+
+#~ msgid "AHCP Settings"
+#~ msgstr "AHCP设置"
+
+#~ msgid "ARP ping retries"
+#~ msgstr "重试ARP ping"
+
+#~ msgid "ATM Settings"
+#~ msgstr "ATM设置"
+
+#~ msgid "Accept Router Advertisements"
+#~ msgstr "接收路由公告"
+
+#~ msgid "Access point (APN)"
+#~ msgstr "接入点(APN)"
+
+#~ msgid "Additional pppd options"
+#~ msgstr "附加pppd选项"
+
+#~ msgid "Allowed range is 1 to FFFF"
+#~ msgstr "允许范围：1 ~ FFFF"
+
+#~ msgid "Automatic Disconnect"
+#~ msgstr "自动断开"
+
+#~ msgid "Backup Archive"
+#~ msgstr "备份的存档"
+
+#~ msgid ""
+#~ "Configure the local DNS server to use the name servers adverticed by the "
+#~ "PPP peer"
+#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
+
+#~ msgid "Connect script"
+#~ msgstr "连接脚本"
+
+#~ msgid "Create backup"
+#~ msgstr "创建备份"
+
+#~ msgid "Default"
+#~ msgstr "默认"
+
+#~ msgid "Disconnect script"
+#~ msgstr "断开脚本"
+
+#~ msgid "Edit package lists and installation targets"
+#~ msgstr "修改软件包的同步源和安装地址"
+
+#~ msgid "Enable 4K VLANs"
+#~ msgstr "开启4K VLAN"
+
+#~ msgid "Enable IPv6 on PPP link"
+#~ msgstr "在PPP链路上启用IPv6"
+
+#~ msgid "Firmware image"
+#~ msgstr "固件文件"
+
+#~ msgid "Forward DHCP"
+#~ msgstr "转发DHCP"
+
+#~ msgid "Forward broadcasts"
+#~ msgstr "转发广播"
+
+#~ msgid "HE.net Tunnel ID"
+#~ msgstr "HE.net隧道ID"
+
+#~ msgid ""
+#~ "Here you can backup and restore your router configuration and - if "
+#~ "possible - reset the router to the default settings."
+#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
+
+#~ msgid "Installation targets"
+#~ msgstr "安装位置"
+
+#~ msgid "Keep configuration files"
+#~ msgstr "保留配置文件"
+
+#~ msgid "Keep-Alive"
+#~ msgstr "保持活动"
+
+#~ msgid "Kernel"
+#~ msgstr "内核"
+
+#~ msgid ""
+#~ "Let pppd replace the current default route to use the PPP interface after "
+#~ "successful connect"
+#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
+
+#~ msgid "Let pppd run this script after establishing the PPP link"
+#~ msgstr "PPP连接建立后运行此脚本"
+
+#~ msgid "Let pppd run this script before tearing down the PPP link"
+#~ msgstr "PPP连接断开前运行此脚本"
+
+#~ msgid ""
+#~ "Make sure that you provide the correct pin code here or you might lock "
+#~ "your sim card!"
+#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
+
+#~ msgid ""
+#~ "Most of them are network servers, that offer a certain service for your "
+#~ "device or network like shell access, serving webpages like <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
+#~ "e-mails, ..."
+#~ msgstr ""
+#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
+#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
+
+#~ msgid "Number of failed connection tests to initiate automatic reconnect"
+#~ msgstr "启动自动重连的失败连接次数"
+
+#~ msgid "Override Gateway"
+#~ msgstr "更新网关"
+
+#~ msgid "PIN code"
+#~ msgstr "PIN码"
+
+#~ msgid "PPP Settings"
+#~ msgstr "PPP设置"
+
+#~ msgid "Package lists"
+#~ msgstr "软件同步源"
+
+#~ msgid ""
+#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
+#~ "VLAN ID added to received untagged frames."
+#~ msgstr ""
+#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
+#~ "记桢的默认VLAN ID。"
+
+#~ msgid "Port PVIDs on %q"
+#~ msgstr "分配%q的端口PVID"
+
+#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
+#~ msgstr "放弃所有配置并将路由复位到默认状态？"
+
+#~ msgid "Processor"
+#~ msgstr "处理器"
+
+#~ msgid "Radius-Port"
+#~ msgstr "Radius-端口"
+
+#~ msgid "Radius-Server"
+#~ msgstr "Radius-服务器"
+
+#~ msgid ""
+#~ "Really shutdown network ?\\nYou might loose access to this router if you "
+#~ "are connected via this interface."
+#~ msgstr ""
+#~ "真的要关闭此网络？\n"
+#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
+
+#~ msgid "Relay Settings"
+#~ msgstr "中继设置"
+
+#~ msgid "Replace default route"
+#~ msgstr "重置默认路由"
+
+#~ msgid "Reset router to defaults"
+#~ msgstr "恢复出厂设置"
+
+#~ msgid "Routing table ID"
+#~ msgstr "路由表ID"
+
+#~ msgid ""
+#~ "Seconds to wait for the modem to become ready before attempting to connect"
+#~ msgstr "Modem尝试连接的就绪准备时间"
+
+#~ msgid "Send Router Solicitiations"
+#~ msgstr "发送路由探测"
+
+#~ msgid "Server IPv4-Address"
+#~ msgstr "服务器IPv4-地址"
+
+#~ msgid "Service type"
+#~ msgstr "服务类型"
+
+#~ msgid "Services and daemons perform certain tasks on your device."
+#~ msgstr "路由器上运行的部分任务和服务。"
+
+#~ msgid "Settings"
+#~ msgstr "设置"
+
+#~ msgid "Setup wait time"
+#~ msgstr "设置缓冲时间"
+
+#~ msgid ""
+#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
+#~ "You need to manually flash your device."
+#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
+
+#~ msgid "Specify additional command line arguments for pppd here"
+#~ msgstr "指定附加命令行参数到pppd"
+
+#~ msgid "TTL"
+#~ msgstr "TTL"
+
+#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
+#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
+
+#~ msgid "Time (in seconds) after which an unused connection will be closed"
+#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
+
+#~ msgid "Time Server (rdate)"
+#~ msgstr "校时服务器(rdate)"
+
+#~ msgid "Tunnel Settings"
+#~ msgstr "隧道设置"
+
+#~ msgid "Update package lists"
+#~ msgstr "更新软件列表"
+
+#~ msgid "Upload an OpenWrt image file to reflash the device."
+#~ msgstr "上传OpenWrt固件以刷新设备。"
+
+#~ msgid "Upload image"
+#~ msgstr "上传固件"
+
+#~ msgid "Use peer DNS"
+#~ msgstr "使用对等DNS"
+
+#~ msgid "VLAN %d"
+#~ msgstr "VLAN %d"
+
+#~ msgid ""
+#~ "You can specify multiple DNS servers here, press enter to add a new "
+#~ "entry. Servers entered here will override automatically assigned ones."
+#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
+
+#~ msgid ""
+#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
+#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
+#~ msgstr ""
+#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
+#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
+
+#~ msgid "back"
+#~ msgstr "后退"
+
+#~ msgid "buffered"
+#~ msgstr "已缓冲"
+
+#~ msgid "cached"
+#~ msgstr "已缓存"
+
+#~ msgid "free"
+#~ msgstr "空闲"
+
+#~ msgid "static"
+#~ msgstr "静态"
+
+#~ msgid ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
+#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
+#~ "\">MVC</abbr>-Webframework and webinterface for embedded devices. <abbr "
+#~ "title=\"Lua Configuration Interface\">LuCI</abbr> is licensed under the "
+#~ "Apache-License."
+#~ msgstr ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一款嵌入式设备使"
+#~ "用的免费Lua软件，包含web框架和web界面。<abbr title=\"Lua Configuration "
+#~ "Interface\">LuCI</abbr>遵循Apache-License."
+
+#~ msgid "<abbr title=\"Secure Shell\">SSH</abbr>-Keys"
+#~ msgstr "<abbr title=\"Secure Shell\">SSH</abbr>-密钥"
+
+#~ msgid ""
+#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve "
+#~ "LuCI"
+#~ msgstr "一个用C语言和Lua实现的服务于LuCI的轻量级 HTTP/1.1 web服务器。"
+
+#~ msgid ""
+#~ "A small webserver which can be used to serve <abbr title=\"Lua "
+#~ "Configuration Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "一个用于<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的小型web服"
+#~ "务器。"
+
+#~ msgid "About"
+#~ msgstr "关于"
+
+#~ msgid "Active IP Connections"
+#~ msgstr "活动IP连接"
+
+#~ msgid "Addresses"
+#~ msgstr "地址"
+
+#~ msgid "Admin Password"
+#~ msgstr "管理密码"
+
+#~ msgid "Alias"
+#~ msgstr "别名"
+
+#~ msgid "Authentication Realm"
+#~ msgstr "验证范围"
+
+#~ msgid "Bridge Port"
+#~ msgstr "桥接端口"
+
+#~ msgid ""
+#~ "Change the password of the system administrator (User <code>root</code>)"
+#~ msgstr "修改管理员密码"
+
+#~ msgid "Client + WDS"
+#~ msgstr "客户端+WDS"
+
+#~ msgid "Configuration file"
+#~ msgstr "配置文件"
+
+#~ msgid "Connection timeout"
+#~ msgstr "连接超时"
+
+#~ msgid "Contributing Developers"
+#~ msgstr "特别致谢"
+
+#~ msgid "DHCP assigned"
+#~ msgstr "DHCP有效分配"
+
+#~ msgid "Document root"
+#~ msgstr "根文档"
+
+#~ msgid "Enable Keep-Alive"
+#~ msgstr "开启保持活动"
+
+#~ msgid "Enable device"
+#~ msgstr "开启设备"
+
+#~ msgid "Ethernet Bridge"
+#~ msgstr "以太网桥"
+
+#~ msgid ""
+#~ "Here you can paste public <abbr title=\"Secure Shell\">SSH</abbr>-Keys "
+#~ "(one per line) for <abbr title=\"Secure Shell\">SSH</abbr> public-key "
+#~ "authentication."
+#~ msgstr ""
+#~ "这里可以粘贴公用<abbr title=\"Secure Shell\">SSH</abbr>密钥以用于<abbr "
+#~ "title=\"Secure Shell\">SSH</abbr>公共密钥认证(每行一个密钥)。"
+
+#~ msgid "ID"
+#~ msgstr "ID"
+
+#~ msgid "IP Configuration"
+#~ msgstr "IP设置"
+
+#~ msgid "Interface Status"
+#~ msgstr "接口状态"
+
+#~ msgid "Lead Development"
+#~ msgstr "开发向导"
+
+#~ msgid "Master"
+#~ msgstr "Master"
+
+#~ msgid "Master + WDS"
+#~ msgstr "Master + WDS"
+
+#~ msgid "No address configured on this interface."
+#~ msgstr "本接口未设置地址"
+
+#~ msgid "Not configured"
+#~ msgstr "未设置"
+
+#~ msgid "Password successfully changed"
+#~ msgstr "密码已修改"
+
+#~ msgid "Plugin path"
+#~ msgstr "插件路径"
+
+#~ msgid "Ports"
+#~ msgstr "端口"
+
+#~ msgid "Primary"
+#~ msgstr "主要的"
+
+#~ msgid "Project Homepage"
+#~ msgstr "项目主页"
+
+#~ msgid "Pseudo Ad-Hoc"
+#~ msgstr "伪装Ad-Hoc"
+
+#~ msgid "STP"
+#~ msgstr "STP"
+
+#~ msgid "Thanks To"
+#~ msgstr "感谢"
+
+#~ msgid ""
+#~ "The realm which will be displayed at the authentication prompt for "
+#~ "protected pages."
+#~ msgstr "在有提示验证保护的网页时显示验证范围。"
+
+#~ msgid "Unknown Error"
+#~ msgstr "未知错误"
+
+#~ msgid "VLAN"
+#~ msgstr "VLAN"
+
+#~ msgid "defaults to <code>/etc/httpd.conf</code>"
+#~ msgstr "默认为<code>/etc/httpd.conf</code>"
+
+#~ msgid "Enable this switch"
+#~ msgstr "开启交换机"
+
+#~ msgid "OPKG error code %i"
+#~ msgstr "OPKG 出错代码 %i"
+
+#~ msgid "Package lists updated"
+#~ msgstr "更新软件包列表"
+
+#~ msgid "Reset switch during setup"
+#~ msgstr "设置时复位交换机"
+
+#~ msgid "Upgrade installed packages"
+#~ msgstr "升级已安装软件"
+
+#~ msgid "<abbr title=\"Domain Name System\">DNS</abbr>-Port"
+#~ msgstr "<abbr title=\"Domain Name System\">DNS</abbr>-端口"
+
+#~ msgid ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a free, "
+#~ "flexible, and user friendly graphical interface for configuring OpenWrt "
+#~ "Kamikaze."
+#~ msgstr ""
+#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr>是一个免费的，灵活"
+#~ "的，可视化的用户界面，可用来配置OpenWrt。"
+
+#~ msgid "AP-Isolation"
+#~ msgstr "AP隔离"
+
+#~ msgid "Active IPv4-Routes"
+#~ msgstr "活动的IPv4链路"
+
+#~ msgid "adds domain names to hostentries in the resolv file"
+#~ msgstr "添加域名条目到主机解析文件"
+
+#~ msgid "Add the Wifi network to physical network"
+#~ msgstr "添加无线网络到物理网络"
+
+#~ msgid ""
+#~ "Also kernel or service logfiles can be viewed here to get an overview "
+#~ "over their current state."
+#~ msgstr "这里显示了系统日志，可以了解系统当前的运行状态。"
+
+#~ msgid "And now have fun with your router!"
+#~ msgstr "现在开始体验路由带来的乐趣吧!"
+
+#~ msgid ""
+#~ "As we always want to improve this interface we are looking forward to "
+#~ "your feedback and suggestions."
+#~ msgstr "我们一直在努力提升界面效果，并期待着您的意见与建议。"
+
+#~ msgid "Attach to existing network"
+#~ msgstr "连接现有网络"
+
+#~ msgid "Clamp Segment Size"
+#~ msgstr "固定段大小"
+
+#~ msgid "Configuration applied"
+#~ msgstr "设置已应用"
+
+#~ msgid "Create Or Attach Network"
+#~ msgstr "创建/连接 网络"
projects / project / luci.git / blobdiff