msgid "Any zone"
msgstr "任意区域"
-msgid "Apply"
-msgstr "应用"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "正在应用更改"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
msgid "Changes applied."
msgstr "更改已应用"
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "修改访问设备的管理员密码"
msgid "Channel"
msgstr "信道"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "检查"
msgid "Configuration"
msgstr "配置"
-msgid "Configuration applied."
-msgstr "配置已应用。"
-
msgid "Configuration files will be kept."
msgstr "配置文件将被保留。"
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "确认密码"
msgid "Connections"
msgstr "连接"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "国家"
msgstr "自定义软件源"
msgid ""
+"Custom files (certificates, scripts) may remain on the system. To prevent "
+"this, perform a factory-reset first."
+msgstr ""
+"自定义文件（证书、脚本）会保留在系统上。若无需保留，请先执行恢复出厂设置。"
+
+msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgstr "自定义此设备的 <abbr title=\"Light Emitting Diode\">LED</abbr> 行为。"
msgid "Device unreachable"
msgstr "无法连接到设备"
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "网络诊断"
msgid "Discard upstream RFC1918 responses"
msgstr "丢弃 RFC1918 上行响应数据"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "只显示有内容的软件包"
msgid "Enable"
msgstr "启用"
+msgid ""
+"Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
+"snooping"
+msgstr ""
+
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "开启 <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid "Enabled"
msgstr "启用"
+msgid "Enables IGMP snooping on this bridge"
+msgstr ""
+
msgid ""
"Enables fast roaming among access points that belong to the same Mobility "
"Domain"
msgid "FT protocol"
msgstr "FT 协议"
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "文件"
msgid "Nslookup"
msgstr "Nslookup"
+msgid "Number of cached DNS entries (max is 10000, 0 is no caching)"
+msgstr "缓存的 DNS 条目数量（最大 10000，0 表示不缓存）"
+
msgid "OK"
msgstr "确认"
msgid "Obfuscated Password"
msgstr "混淆密码"
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "关闭时间"
msgid "Revert"
msgstr "放弃"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Root"
msgid "Save & Apply"
msgstr "保存&应用"
-msgid "Save & Apply"
-msgstr "保存&应用"
-
msgid "Scan"
msgstr "扫描"
msgid "Size (.ipk)"
msgstr "大小（.ipk）"
+msgid "Size of DNS query cache"
+msgstr "DNS 查询缓存的大小"
+
msgid "Skip"
msgstr "跳过"
msgid "Start priority"
msgstr "启动优先级"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "启动项"
msgstr "由于以下错误，配置文件无法被加载："
msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
+msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgstr "存储器或分区的设备文件，（例如：<code>/dev/sda1</code>）"
"固件已上传，请注意核对文件大小和校验值！<br />点击下面的“继续”开始刷写，刷新"
"过程中切勿断电！"
-msgid "The following changes have been committed"
-msgstr "以下更改已提交"
-
msgid "The following changes have been reverted"
msgstr "以下更改已放弃"
msgid "There are no active leases."
msgstr "没有已分配的租约。"
-msgid "There are no pending changes to apply!"
-msgstr "没有待生效的更改！"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "没有可放弃的更改！"
msgid ""
"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
-msgstr "隧道代理分配的本地终端地址，通常以 <code>:2</code> 结尾"
+"ends with <code>...:2/64</code>"
+msgstr "隧道代理分配的本地终端地址，通常以 <code>...:2/64</code> 结尾"
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies the fixed "
+"em> identifies the host, the <em>IPv4-Address</em> specifies the fixed "
"address to use, and the <em>Hostname</em> is assigned as a symbolic name to "
"the requesting host. The optional <em>Lease time</em> can be used to set non-"
"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgid "Waiting for command to complete..."
msgstr "等待命令执行完成..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr "等待设备..."
msgid "overlay"
msgstr "覆盖"
+msgid "random"
+msgstr ""
+
msgid "relay mode"
msgstr "中继模式"
msgid "« Back"
msgstr "« 后退"
+#~ msgid "Apply"
+#~ msgstr "应用"
+
+#~ msgid "Applying changes"
+#~ msgstr "正在应用更改"
+
+#~ msgid "Configuration applied."
+#~ msgstr "配置已应用。"
+
+#~ msgid "Save & Apply"
+#~ msgstr "保存&应用"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "以下更改已提交"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "没有待生效的更改！"
+
#~ msgid "Action"
#~ msgstr "动作"
projects / project / luci.git / blobdiff