msgid "-- custom --"
msgstr "-- własne --"
+msgid "-- match by device --"
+msgstr ""
+
+msgid "-- match by label --"
+msgstr ""
+
msgid "1 Minute Load:"
-msgstr "Obciążenie w ciągu 1 minuty:"
+msgstr "Obciążenie 1 min.:"
msgid "15 Minute Load:"
-msgstr "Obciążenie w ciągu 15 minut:"
+msgstr "Obciążenie 15 min.:"
+
+msgid "464XLAT (CLAT)"
+msgstr ""
msgid "5 Minute Load:"
-msgstr "Obciążenie w ciągu 5 minut:"
+msgstr "Obciążenie 5 min.:"
msgid "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgstr "<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"
msgid "ADSL Status"
msgstr ""
+msgid "AICCU (SIXXS)"
+msgstr ""
+
msgid "APN"
msgstr "APN"
msgid "ATM device number"
msgstr "Numer urządzenia ATM"
+msgid "AYIYA"
+msgstr ""
+
# co to takiego?
msgid "Access Concentrator"
msgstr "Koncentrator dostępowy ATM"
msgid "Additional Hosts files"
msgstr "Dodatkowe pliki Hosts"
+msgid "Additional servers file"
+msgstr ""
+
msgid "Address"
msgstr "Adres"
msgstr ""
"Pozwól na ruch wychodzący (odpowiedzi) z podsieci 127.0.0.0/8, np. usługi RBL"
-msgid "Always announce default router"
+msgid ""
+"Also see <a href=\"https://www.sixxs.net/faq/connectivity/?faq=comparison"
+"\">Tunneling Comparison</a> on SIXXS"
msgstr ""
-msgid ""
-"Always use 40MHz channels even if the secondary channel overlaps. Using this "
-"option does not comply with IEEE 802.11n-2009!"
+msgid "Always announce default router"
msgstr ""
-"Zawsze używaj kanał 40MHz nawet jeśli drugi kanał pokrywa się. Użycie tej "
-"opcji nie jest zgodne ze standardem IEEE 802.11n-2009!"
msgid "An additional network will be created if you leave this unchecked."
msgstr ""
msgid "Announced DNS servers"
msgstr ""
+msgid "Anonymous Mount"
+msgstr ""
+
+msgid "Anonymous Swap"
+msgstr ""
+
msgid "Antenna 1"
msgstr "Antena 1"
msgid "Atheros 802.11%s Wireless Controller"
msgstr "Bezprzewodowy kontroler Atheros 802.11%s"
+msgid "Auth Group"
+msgstr ""
+
+msgid "AuthGroup"
+msgstr ""
+
msgid "Authentication"
msgstr "Uwierzytelnianie"
msgid "Automatic Homenet (HNCP)"
msgstr ""
+msgid "Automatically check filesystem for errors before mounting"
+msgstr ""
+
+msgid "Automatically mount filesystems on hotplug"
+msgstr ""
+
+msgid "Automatically mount swap on hotplug"
+msgstr ""
+
+msgid "Automount Filesystem"
+msgstr ""
+
+msgid "Automount Swap"
+msgstr ""
+
msgid "Available"
msgstr "Dostępne"
msgid "Average:"
msgstr "Średnia:"
+msgid "BR / DMR / AFTR"
+msgstr ""
+
msgid "BSSID"
msgstr "BSSID"
msgid "Band"
msgstr ""
+msgid "Behind NAT"
+msgstr ""
+
msgid ""
"Below is the determined list of files to backup. It consists of changed "
"configuration files marked by opkg, essential base files and the user "
msgid "Buffered"
msgstr "Buforowana"
+msgid ""
+"Build/distribution specific feed definitions. This file will NOT be "
+"preserved in any sysupgrade."
+msgstr ""
+
msgid "Buttons"
msgstr "Przyciski"
+msgid "CA certificate; if empty it will be saved after the first connection."
+msgstr ""
+
msgid "CPU"
msgstr "CPU"
msgid "CPU usage (%)"
msgstr "Użycie CPU (%)"
-msgid "Cached"
-msgstr "Cache"
-
msgid "Cancel"
msgstr "Anuluj"
msgid "Check"
msgstr "Sprawdź"
+msgid "Check fileystems before mount"
+msgstr ""
+
msgid "Checksum"
msgstr "Suma kontrolna"
msgid "Cipher"
msgstr "Szyfr"
+msgid "Cisco UDP encapsulation"
+msgstr ""
+
# Przyciski nazywają sie "Twórz archiwum" i "Wykonaj reset" a nie Przywróć Ustawienia
msgid ""
"Click \"Generate archive\" to download a tar archive of the current "
msgid "Configuration files will be kept."
msgstr "Pliki konfiguracyjne zostaną zachowane."
-msgid "Configures this mount as overlay storage for block-extroot"
-msgstr "Konfiguruje ten zasób jako zasób overlay dla block-extroot"
-
msgid "Confirmation"
msgstr "Potwierdzenie"
msgid "Connection Limit"
msgstr "Limit połączeń"
+msgid "Connection to server fails when TLS cannot be used"
+msgstr ""
+
msgid "Connections"
msgstr "Połączenia"
msgid "Custom delegated IPv6-prefix"
msgstr ""
+msgid ""
+"Custom feed definitions, e.g. private feeds. This file can be preserved in a "
+"sysupgrade."
+msgstr ""
+
+msgid "Custom feeds"
+msgstr ""
+
# Spacji zabrało i napisy się skleiły
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
msgid "DNS-Label / FQDN"
msgstr ""
+msgid "DPD Idle Timeout"
+msgstr ""
+
msgid "DS-Lite AFTR address"
msgstr ""
msgid "Default gateway"
msgstr "Brama domyślna"
+msgid "Default route"
+msgstr ""
+
msgid "Default state"
msgstr "Stan domyślny"
msgid "Delete"
msgstr "Usuń"
-msgid "Delete this interface"
-msgstr "Usuń ten interfejs"
-
msgid "Delete this network"
msgstr "Usuń tą sieć"
msgid "Device Configuration"
msgstr "Konfiguracja urządzenia"
+msgid "Device is rebooting..."
+msgstr ""
+
+msgid "Device unreachable"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnostyka"
msgid "Disable DNS setup"
msgstr "Wyłącz konfigurowanie DNS"
+msgid "Disable Encryption"
+msgstr ""
+
msgid "Disable HW-Beacon timer"
msgstr "Wyłącz zegar HW-Beacon"
msgid "Distance to farthest network member in meters."
msgstr "Odległość do najdalej oddalonego członka sieci w metrach."
+msgid "Distribution feeds"
+msgstr ""
+
# Jak poprzednio trzymam się konwencji
msgid "Diversity"
msgstr "Wielorakość"
"Dynamicznie rezerwuje adresy DHCP dla klientów. Jeśli jest wyłączone tylko "
"klienci posiadający stałe dzierżawy będą obsłużeni."
+msgid "EA-bits length"
+msgstr ""
+
msgid "EAP-Method"
msgstr "Metoda EAP"
msgid "Edit"
msgstr "Edycja"
+msgid ""
+"Edit the raw configuration data above to fix any error and hit \"Save\" to "
+"reload the page."
+msgstr ""
+
msgid "Edit this interface"
msgstr "Edytuj ten interfejs"
msgid "Enable NTP client"
msgstr "Włącz klienta NTP"
+msgid "Enable Single DES"
+msgstr ""
+
msgid "Enable TFTP server"
msgstr "Włącz serwer TFTP"
msgid "Enable VLAN functionality"
msgstr "Włącz funkcjonalność VLAN"
+msgid "Enable WPS pushbutton, requires WPA(2)-PSK"
+msgstr ""
+
msgid "Enable learning and aging"
msgstr "Włącz uczenie się i starzenie"
+msgid "Enable mirroring of incoming packets"
+msgstr ""
+
+msgid "Enable mirroring of outgoing packets"
+msgstr ""
+
msgid "Enable this mount"
msgstr "Włącz ten punkt montowania"
msgid "External system log server port"
msgstr "Port zewnętrznego serwera dla loga systemowego"
+msgid "Extra SSH command options"
+msgstr ""
+
msgid "Fast Frames"
msgstr "Szybkie ramki (Fast Frames)"
msgid "Filter useless"
msgstr "Filtruj bezużyteczne"
+msgid ""
+"Find all currently attached filesystems and swap and replace configuration "
+"with defaults based on what was detected"
+msgstr ""
+
msgid "Find and join network"
msgstr "Znajdź i podłącz się do sieci"
msgid "Fixed source port for outbound DNS queries"
msgstr "Stały port źródłowy dla wychodzących zapytań DNS"
-msgid "Flags"
-msgstr "Flagi"
-
msgid "Flash Firmware"
msgstr "Aktualizuj firmware"
msgid "Force"
msgstr "Wymuś"
-msgid "Force 40MHz mode"
-msgstr "Wymuś tryb 40MHz"
-
msgid "Force CCMP (AES)"
msgstr "Wymuś CCMP (AES)"
msgid "Force TKIP and CCMP (AES)"
msgstr "Wymuś TKIP i CCMP (AES)"
+msgid "Force use of NAT-T"
+msgstr ""
+
+msgid "Form token mismatch"
+msgstr ""
+
msgid "Forward DHCP traffic"
msgstr "Przekazuj ruch DHCP"
msgid "Free space"
msgstr "Wolna przestrzeń"
-msgid "Frequency Hopping"
-msgstr "Skakanie po częstotliwościach"
-
msgid "GHz"
msgstr "GHz"
msgid "General Setup"
msgstr "Ustawienia podstawowe"
+msgid "General options for opkg"
+msgstr ""
+
+msgid "Generate Config"
+msgstr ""
+
msgid "Generate archive"
msgstr "Twórz archiwum"
"Hasło nie zostało zmienione, wpisane poprzednie hasło routera jest "
"niewłaściwe!"
+msgid "Global Settings"
+msgstr ""
+
msgid "Global network options"
msgstr ""
msgid "Go to relevant configuration page"
msgstr "Przejdź do powiązanych ustawień"
+msgid "Group Password"
+msgstr ""
+
msgid "Guest"
msgstr ""
msgid "HE.net username"
msgstr ""
-msgid "HT mode (802.11n)"
-msgstr ""
-
msgid "Handler"
msgstr "Uchwyt"
msgid "Hang Up"
msgstr "Rozłącz"
+msgid "Heartbeat"
+msgstr ""
+
msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
"Ukryj <abbr title=\"Extended Service Set Identifier (Nazwę sieci)\">ESSID</"
"abbr>"
+msgid "Host"
+msgstr ""
+
msgid "Host entries"
msgstr "Wpisy PC"
msgid "Hostnames"
msgstr "Nazwy hostów"
+msgid "Hybrid"
+msgstr ""
+
+msgid "IKE DH Group"
+msgstr ""
+
msgid "IP address"
msgstr "Adres IP"
msgid "IPv4 only"
msgstr "Tylko IPv4"
+msgid "IPv4 prefix"
+msgstr ""
+
msgid "IPv4 prefix length"
msgstr "Długość prefiksu IPv4"
msgid "IPv6 Firewall"
msgstr "Firewall IPv6"
+msgid "IPv6 Neighbours"
+msgstr ""
+
msgid "IPv6 Settings"
msgstr ""
msgid "IPv6 address"
msgstr "Adres IPv6"
+msgid "IPv6 address delegated to the local tunnel endpoint (optional)"
+msgstr ""
+
msgid "IPv6 assignment hint"
msgstr ""
msgid "Identity"
msgstr "Tożsamość"
+msgid "If checked, 1DES is enaled"
+msgstr ""
+
+msgid "If checked, encryption is disabled"
+msgstr ""
+
msgid ""
"If specified, mount the device by its UUID instead of a fixed device node"
msgstr ""
"Memory\">RAM</abbr> będzie dostępna. Uwaga - plik wymiany jest dużo "
"wolniejszy niż pamięć <abbr title=\"Random Access Memory\">RAM</abbr>."
-msgid "Ignore Hosts files"
-msgstr "Ignoruj pliki Hosts"
+msgid "Ignore <code>/etc/hosts</code>"
+msgstr ""
msgid "Ignore interface"
msgstr "Ignoruj interfejs"
msgid "In"
msgstr "W"
+msgid ""
+"In order to prevent unauthorized access to the system, your request has been "
+"blocked. Click \"Continue »\" below to return to the previous page."
+msgstr ""
+
msgid "Inactivity timeout"
msgstr "Czas bezczynności"
msgid "Interfaces"
msgstr "Interfejsy"
+msgid "Internal"
+msgstr ""
+
# Nadużycie tagu abbr uważam za uzasadnione.
msgid "Internal Server Error"
msgstr "Wewnętrzny błąd serwera"
msgid "Language and Style"
msgstr "Wygląd i język"
+msgid "Leaf"
+msgstr ""
+
msgid "Lease validity time"
msgstr "Czas ważności dzierżawy"
"Lista serwerów <abbr title=\"Domain Name System\">DNS</abbr> do których będą "
"przekazywane zapytania"
+msgid "List of SSH key files for auth"
+msgstr ""
+
msgid "List of domains to allow RFC1918 responses for"
msgstr "Lista domen zezwalających na odpowiedzi RFC1918"
msgid "Loading"
msgstr "Ładowanie"
+msgid "Local IP address to assign"
+msgstr ""
+
msgid "Local IPv4 address"
msgstr "Lokalny adres IPv4"
msgid "Localise queries"
msgstr "Zapytania lokalizujące"
-msgid "Locked to channel %d used by %s"
-msgstr "Zablokowano dla kanału %d używanego przez %s"
+msgid "Locked to channel %s used by: %s"
+msgstr ""
msgid "Log output level"
msgstr "Poziom logowania"
msgid "MAC-List"
msgstr "Lista MAC"
+msgid "MAP / LW4over6"
+msgstr ""
+
msgid "MB/s"
msgstr "MB/s"
msgid "MTU"
msgstr "MTU"
+msgid ""
+"Make sure to clone the root filesystem using something like the commands "
+"below:"
+msgstr ""
+
+msgid "Manual"
+msgstr ""
+
msgid "Maximum Rate"
msgstr "Maksymalna Szybkość"
msgid "Maximum hold time"
msgstr "Maksymalny czas podtrzymania"
+msgid ""
+"Maximum length of the name is 15 characters including the automatic protocol/"
+"bridge prefix (br-, 6in4-, pppoe- etc.)"
+msgstr ""
+
msgid "Maximum number of leased addresses."
msgstr "Maksymalna liczba dzierżawionych adresów."
msgid "Minimum hold time"
msgstr "Minimalny czas podtrzymania"
+msgid "Mirror monitor port"
+msgstr ""
+
+msgid "Mirror source port"
+msgstr ""
+
msgid "Missing protocol extension for proto %q"
msgstr "Brakujące rozszerzenie protokołu dla protokołu %q"
"Punkty montowania definiują gdzie urządzenie pamięci zostanie podłączone do "
"systemu plików"
+msgid "Mount filesystems not specifically configured"
+msgstr ""
+
msgid "Mount options"
msgstr "Opcje montowania"
msgid "Mount point"
msgstr "Punkt montownia"
+msgid "Mount swap not specifically configured"
+msgstr ""
+
msgid "Mounted file systems"
msgstr "Zamontowane systemy plików"
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NAT-T Mode"
+msgstr ""
+
+msgid "NAT64 Prefix"
+msgstr ""
+
msgid "NDP-Proxy"
msgstr ""
+msgid "NT Domain"
+msgstr ""
+
msgid "NTP server candidates"
msgstr "Lista serwerów NTP"
+msgid "NTP sync time-out"
+msgstr ""
+
msgid "Name"
msgstr "Nazwa"
msgid "No DHCP Server configured for this interface"
msgstr "Brak skonfigurowanego serwera DHCP dla tego interfejsu"
+msgid "No NAT-T"
+msgstr ""
+
msgid "No chains in this table"
msgstr "Brak łańcuchów w tej tablicy"
msgid "Note: Configuration files will be erased."
msgstr "UWAGA: Pliki konfiguracyjne zostaną usunięte."
+msgid "Note: interface name length"
+msgstr ""
+
msgid "Notice"
msgstr "Spostrzeżenie"
msgid "OPKG-Configuration"
msgstr "Konfiguracja OPKG"
+msgid "Obfuscated Group Password"
+msgstr ""
+
+msgid "Obfuscated Password"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Zwłoka wyłączenia"
msgid "Open list..."
msgstr "Otwórz listę..."
+msgid "OpenConnect (CISCO AnyConnect)"
+msgstr ""
+
+msgid "Operating frequency"
+msgstr ""
+
msgid "Option changed"
msgstr "Wartość zmieniona"
msgid "Option removed"
msgstr "Usunięto wartość"
+msgid "Optional, specify to override default server (tic.sixxs.net)"
+msgstr ""
+
+msgid "Optional, use when the SIXXS account has more than one tunnel"
+msgstr ""
+
msgid "Options"
msgstr "Opcje"
msgstr "Wychodzące"
msgid "Outbound:"
-msgstr "Wychodzące:"
+msgstr "Wychodzący:"
msgid "Outdoor Channels"
msgstr "Kanały zewnętrzne"
+msgid "Output Interface"
+msgstr ""
+
msgid "Override MAC address"
msgstr "Nadpisz adres MAC"
msgid "PPPoE"
msgstr "PPPoE"
+msgid "PPPoSSH"
+msgstr ""
+
msgid "PPtP"
msgstr "PPtP"
+msgid "PSID offset"
+msgstr ""
+
+msgid "PSID-bits length"
+msgstr ""
+
msgid "Package libiwinfo required!"
msgstr "Wymagany pakiet libiwinfo!"
msgid "Password of Private Key"
msgstr "Hasło lub klucz prywatny"
+msgid "Password of inner Private Key"
+msgstr ""
+
msgid "Password successfully changed!"
msgstr "Pomyślnie zmieniono hasło!"
"Ścieżka do pliku wykonywalnego, który obsługuje zdarzenie dla danego "
"przycisku"
+msgid "Path to inner CA-Certificate"
+msgstr ""
+
+msgid "Path to inner Client-Certificate"
+msgstr ""
+
+msgid "Path to inner Private Key"
+msgstr ""
+
msgid "Peak:"
msgstr "Szczyt:"
+msgid "Peer IP address to assign"
+msgstr ""
+
+msgid "Perfect Forward Secrecy"
+msgstr ""
+
msgid "Perform reboot"
msgstr "Wykonaj restart"
msgid "Please enter your username and password."
msgstr "Proszę wprowadź swój login i hasło."
-msgid "Please wait: Device rebooting..."
-msgstr "Proszę czekać: Ponowne uruchamianie..."
-
msgid "Policy"
msgstr "Zasada"
msgid "Quality"
msgstr "Jakość"
+msgid "RFC3947 NAT-T mode"
+msgstr ""
+
msgid "RTS/CTS Threshold"
msgstr "Próg RTS/CTS"
msgid "Request IPv6-prefix of length"
msgstr ""
+msgid "Require TLS"
+msgstr ""
+
msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
msgstr "Wymagany dla niektórych dostawców internetu, np. Charter z DOCSIS 3"
msgid "Root directory for files served via TFTP"
msgstr "Katalog Root`a dla plików udostępnianych przez TFTP"
+msgid "Root preparation"
+msgstr ""
+
+msgid "Routed IPv6 prefix for downstream interfaces"
+msgstr ""
+
msgid "Router Advertisement-Service"
msgstr ""
"Ścieżki routingu pokazują routerowi przez który interfejs oraz którą bramę "
"może skomunikować się z daną siecią lub komputerem."
-msgid "Rule #"
-msgstr "Zasada #"
-
msgid "Run a filesystem check before mounting the device"
msgstr ""
"Sprawdź czy system plików nie zawiera błędów przed zamontowaniem urządzenia"
msgid "Run filesystem check"
msgstr "Sprawdź czy system plików nie zawiera błędów"
+msgid ""
+"SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) "
+"use 6in4 instead"
+msgstr ""
+
+msgid "SIXXS-handle[/Tunnel-ID]"
+msgstr ""
+
+msgid "SNR"
+msgstr ""
+
msgid "SSH Access"
msgstr "Dostęp SSH"
+msgid "SSH server address"
+msgstr ""
+
+msgid "SSH server port"
+msgstr ""
+
+msgid "SSH username"
+msgstr ""
+
msgid "SSH-Keys"
msgstr "Klucze SSH"
msgid "Server Settings"
msgstr "Ustawienia serwera"
+msgid "Server password"
+msgstr ""
+
+msgid ""
+"Server password, enter the specific password of the tunnel when the username "
+"contains the tunnel ID"
+msgstr ""
+
+msgid "Server username"
+msgstr ""
+
msgid "Service Name"
msgstr "Nazwa serwisu"
msgid "Setup DHCP Server"
msgstr "Ustawienia serwera DHCP"
+msgid "Short GI"
+msgstr ""
+
msgid "Show current backup file list"
msgstr "Pokaż aktualną listę plików do backupu"
msgid "Size"
msgstr "Rozmiar"
+msgid "Size (.ipk)"
+msgstr ""
+
msgid "Skip"
msgstr "Pomiń"
msgid "Source"
msgstr "Źródło"
+msgid "Source routing"
+msgstr ""
+
msgid "Specifies the button state to handle"
msgstr "Określa zachowanie w zależności od stanu przycisku"
msgid "Target"
msgstr "Cel"
+msgid "Target network"
+msgstr ""
+
msgid "Terminate"
msgstr "Zakończ"
"Dozwolone znaki to: <code>A-Z</code>, <code>a-z</code>, <code>0-9</code> "
"oraz <code>_</code>"
+msgid "The configuration file could not be loaded due to the following error:"
+msgstr ""
+
msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgid "The selected protocol needs a device assigned"
msgstr "Wybrany protokół potrzebuje przypisanego urządzenia"
+msgid "The submitted security token is invalid or already expired!"
+msgstr ""
+
msgid ""
"The system is erasing the configuration partition now and will reboot itself "
"when finished."
"się do urządzenia."
msgid ""
+"The tunnel end-point is behind NAT, defaults to disabled and only applies to "
+"AYIYA"
+msgstr ""
+
+msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
"you choose the generic image format for your platform."
msgstr ""
msgstr "Ten adres IPv4 przekaźnika"
msgid ""
+"This file may contain lines like 'server=/domain/1.2.3.4' or "
+"'server=1.2.3.4' fordomain-specific or full upstream <abbr title=\"Domain "
+"Name System\">DNS</abbr> servers."
+msgstr ""
+
+msgid ""
"This is a list of shell glob patterns for matching files and directories to "
"include during sysupgrade. Modified files in /etc/config/ and certain other "
"configurations are automatically preserved."
"To jest lokalny adres końcowy przypisany przez tunnel broker'a, zwykle "
"kończący się z <code>:2</code>"
-# w tłumaczeniu pojawiła się spacja po DHCP</ abbr> co powoduje niepoprawne wyświetlanie się strony z lang PL
+# w tłumaczeniu pojawiła się spacja po DHCP</abbr> co powoduje niepoprawne wyświetlanie się strony z lang PL
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"abbr> in the local network"
msgid "Tunnel Link"
msgstr ""
+msgid "Tunnel broker protocol"
+msgstr ""
+
+msgid "Tunnel setup server"
+msgstr ""
+
+msgid "Tunnel type"
+msgstr ""
+
msgid "Turbo Mode"
msgstr "Tryb Turbo"
msgid "Unmanaged"
msgstr "Niezarządzalny"
+msgid "Unmount"
+msgstr ""
+
msgid "Unsaved Changes"
msgstr "Niezapisane zmiany"
msgid "Use TTL on tunnel interface"
msgstr "Użyj TTL na interfejsie tunelu"
-msgid "Use as root filesystem"
-msgstr "Użyj systemu plików root'a"
+msgid "Use as external overlay (/overlay)"
+msgstr ""
+
+msgid "Use as root filesystem (/)"
+msgstr ""
msgid "Use broadcast flag"
msgstr "Użyj flagi rozgłaszania"
msgid "Used Key Slot"
msgstr "Użyte gniazdo klucza"
+msgid "User certificate (PEM encoded)"
+msgstr ""
+
+msgid "User key (PEM encoded)"
+msgstr ""
+
msgid "Username"
msgstr "Nazwa użytkownika"
msgid "VLANs on %q (%s)"
msgstr "Sieci VLAN na %q (%s)"
+msgid "VPN Local address"
+msgstr ""
+
+msgid "VPN Local port"
+msgstr ""
+
msgid "VPN Server"
msgstr "Serwer VPN"
+msgid "VPN Server port"
+msgstr ""
+
+msgid "VPN Server's certificate SHA1 hash"
+msgstr ""
+
+msgid "VPNC (CISCO 3000 (and others) VPN)"
+msgstr ""
+
+msgid "Vendor"
+msgstr ""
+
msgid "Vendor Class to send when requesting DHCP"
msgstr "Klasa producenta do wysłania podczas żądania DHCP"
+msgid "Verbose"
+msgstr ""
+
+msgid "Verbose logging by aiccu daemon"
+msgstr ""
+
msgid "Verify"
msgstr "Zweryfikuj"
"Kodowanie WPA wymaga zainstalowanych modułów wpa_supplicant (na tryb "
"klienta) lub hostapd (dla trybów AP lub ad-hoc)"
+msgid ""
+"Wait for NTP sync that many seconds, seting to 0 disables waiting (optional)"
+msgstr ""
+
# obsy: Brzmi to lepiej niż "czekanie na wprowadzanie zmian.
msgid "Waiting for changes to be applied..."
msgstr "Trwa wprowadzenie zmian..."
msgid "Waiting for command to complete..."
msgstr "Trwa wykonanie polecenia..."
+msgid "Waiting for device..."
+msgstr ""
+
msgid "Warning"
msgstr "Ostrzeżenie"
-msgid "Warning: There are unsaved changes that will be lost while rebooting!"
+msgid "Warning: There are unsaved changes that will get lost on reboot!"
+msgstr ""
+
+msgid "Whether to create an IPv6 default route over the tunnel"
+msgstr ""
+
+msgid "Whether to route only packets from delegated prefixes"
+msgstr ""
+
+msgid "Width"
msgstr ""
-"Ostrzeżenie: Pozostały niezapisane zmian, które zostaną utracone podczas "
-"restartu!"
msgid "Wifi"
msgstr "Wifi"
"Musisz włączyć obsługę Java Script w swojej przeglądarce, inaczej LuCI nie "
"będzie działać poprawnie."
+msgid ""
+"Your Internet Explorer is too old to display this page correctly. Please "
+"upgrade it to at least version 7 or use another browser like Firefox, Opera "
+"or Safari."
+msgstr ""
+
msgid "any"
msgstr "dowolny"
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "lokalny plik <abbr title=\"Domain Name System\">DNS</abbr>"
+msgid "minimum 1280, maximum 1480"
+msgstr ""
+
+msgid "navigation Navigation"
+msgstr ""
+
msgid "no"
msgstr "nie"
msgid "none"
msgstr "żaden"
+msgid "not present"
+msgstr ""
+
msgid "off"
msgstr "wyłączone"
msgid "open"
msgstr "otwarte"
+msgid "overlay"
+msgstr ""
+
msgid "relay mode"
msgstr ""
msgid "server mode"
msgstr ""
+msgid "skiplink1 Skip to navigation"
+msgstr ""
+
+msgid "skiplink2 Skip to content"
+msgstr ""
+
msgid "stateful-only"
msgstr ""
msgid "« Back"
msgstr "« Wróć"
+#~ msgid "Delete this interface"
+#~ msgstr "Usuń ten interfejs"
+
+#~ msgid "Flags"
+#~ msgstr "Flagi"
+
+#~ msgid "Rule #"
+#~ msgstr "Zasada #"
+
+#~ msgid "Ignore Hosts files"
+#~ msgstr "Ignoruj pliki Hosts"
+
+#~ msgid "Please wait: Device rebooting..."
+#~ msgstr "Proszę czekać: Ponowne uruchamianie..."
+
+#~ msgid ""
+#~ "Warning: There are unsaved changes that will be lost while rebooting!"
+#~ msgstr ""
+#~ "Ostrzeżenie: Pozostały niezapisane zmian, które zostaną utracone podczas "
+#~ "restartu!"
+
+#~ msgid ""
+#~ "Always use 40MHz channels even if the secondary channel overlaps. Using "
+#~ "this option does not comply with IEEE 802.11n-2009!"
+#~ msgstr ""
+#~ "Zawsze używaj kanał 40MHz nawet jeśli drugi kanał pokrywa się. Użycie tej "
+#~ "opcji nie jest zgodne ze standardem IEEE 802.11n-2009!"
+
+#~ msgid "Cached"
+#~ msgstr "Cache"
+
+#~ msgid "Configures this mount as overlay storage for block-extroot"
+#~ msgstr "Konfiguruje ten zasób jako zasób overlay dla block-extroot"
+
+#~ msgid "Force 40MHz mode"
+#~ msgstr "Wymuś tryb 40MHz"
+
+#~ msgid "Frequency Hopping"
+#~ msgstr "Skakanie po częstotliwościach"
+
+#~ msgid "Locked to channel %d used by %s"
+#~ msgstr "Zablokowano dla kanału %d używanego przez %s"
+
+#~ msgid "Use as root filesystem"
+#~ msgstr "Użyj systemu plików root'a"
+
#~ msgid "HE.net user ID"
#~ msgstr "Login (ID) HE.net"
projects / project / luci.git / blobdiff