msgid "Access Point"
msgstr "Punto de Acceso"
-msgid "Action"
-msgstr "Acción"
-
msgid "Actions"
msgstr "Acciones"
msgid "Allow all except listed"
msgstr "Permitir a todos excepto a los de la lista"
+msgid "Allow legacy 802.11b rates"
+msgstr ""
+
msgid "Allow listed only"
msgstr "Permitir a los pertenecientes en la lista"
msgid "Any zone"
msgstr "Cualquier zona"
-msgid "Apply"
-msgstr "Aplicar"
+msgid "Apply request failed with status <code>%h</code>"
+msgstr ""
-msgid "Applying changes"
-msgstr "Aplicando cambios"
+msgid "Apply unchecked"
+msgstr ""
msgid ""
"Assign a part of given length of every public IPv6-prefix to this interface"
"preserved in any sysupgrade."
msgstr ""
-msgid "Buttons"
-msgstr "Botones"
-
msgid "CA certificate; if empty it will be saved after the first connection."
msgstr ""
msgid "Changes applied."
msgstr "Cambios aplicados."
+msgid "Changes have been reverted."
+msgstr ""
+
msgid "Changes the administrator password for accessing the device"
msgstr "Cambie la contraseña del administrador para acceder al dispositivo"
msgid "Channel"
msgstr "Canal"
+msgid ""
+"Channel %d is not available in the %s regulatory domain and has been auto-"
+"adjusted to %d."
+msgstr ""
+
msgid "Check"
msgstr "Comprobar"
msgid "Configuration"
msgstr "Configuración"
-msgid "Configuration applied."
-msgstr "Configuración establecida."
-
msgid "Configuration files will be kept."
msgstr "Se mantendrán los ficheros de configuración."
+msgid "Configuration has been applied."
+msgstr ""
+
+msgid "Configuration has been rolled back!"
+msgstr ""
+
msgid "Confirmation"
msgstr "Confirmación"
msgid "Connections"
msgstr "Conexiones"
+msgid ""
+"Could not regain access to the device after applying the configuration "
+"changes. You might need to reconnect if you modified network related "
+"settings such as the IP address or wireless security credentials."
+msgstr ""
+
msgid "Country"
msgstr "País"
msgstr ""
msgid ""
+"Custom files (certificates, scripts) may remain on the system. To prevent "
+"this, perform a factory-reset first."
+msgstr ""
+
+msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgstr ""
msgid "Device unreachable"
msgstr ""
+msgid "Device unreachable!"
+msgstr ""
+
msgid "Diagnostics"
msgstr "Diagnósticos"
msgid "Discard upstream RFC1918 responses"
msgstr "Descartar respuestas RFC1918 salientes"
+msgid "Dismiss"
+msgstr ""
+
msgid "Displaying only packages containing"
msgstr "Mostrar sólo paquete que contienen"
msgid "Enable"
msgstr "Activar"
+msgid ""
+"Enable <abbr title=\"Internet Group Management Protocol\">IGMP</abbr> "
+"snooping"
+msgstr ""
+
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "Activar <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgid "Enabled"
msgstr "Activado"
+msgid "Enables IGMP snooping on this bridge"
+msgstr ""
+
msgid ""
"Enables fast roaming among access points that belong to the same Mobility "
"Domain"
msgid "FT protocol"
msgstr ""
+msgid "Failed to confirm apply within %ds, waiting for rollback…"
+msgstr ""
+
msgid "File"
msgstr "Fichero"
msgid "Forward broadcast traffic"
msgstr "Retransmitir tráfico de propagación"
+msgid "Forward mesh peer traffic"
+msgstr ""
+
msgid "Forwarding mode"
msgstr "Modo de retransmisión"
msgid "HT mode (802.11n)"
msgstr ""
-msgid "Handler"
-msgstr "Manejador"
-
msgid "Hang Up"
msgstr "Suspender"
msgid "Maximum amount of seconds to wait for the modem to become ready"
msgstr "Segundos máximos de espera a que el módem esté activo"
-msgid "Maximum hold time"
-msgstr "Pausa máxima de transmisión"
-
msgid ""
"Maximum length of the name is 15 characters including the automatic protocol/"
"bridge prefix (br-, 6in4-, pppoe- etc.)"
msgid "Memory usage (%)"
msgstr "Uso de memoria (%)"
+msgid "Mesh Id"
+msgstr ""
+
msgid "Metric"
msgstr "Métrica"
-msgid "Minimum hold time"
-msgstr "Pausa mínima de espera"
-
msgid "Mirror monitor port"
msgstr ""
msgid "Nslookup"
msgstr "NSLookup"
+msgid "Number of cached DNS entries (max is 10000, 0 is no caching)"
+msgstr ""
+
msgid "OK"
msgstr "Aceptar"
msgid "Obfuscated Password"
msgstr ""
+msgid "Obtain IPv6-Address"
+msgstr ""
+
msgid "Off-State Delay"
msgstr "Retraso de desconexión"
msgid "Path to Private Key"
msgstr "Ruta a la Clave Privada"
-msgid "Path to executable which handles the button event"
-msgstr "Ruta al ejecutable que maneja el evento button"
-
msgid "Path to inner CA-Certificate"
msgstr ""
msgid "Revert"
msgstr "Anular"
+msgid "Revert changes"
+msgstr ""
+
+msgid "Revert request failed with status <code>%h</code>"
+msgstr ""
+
+msgid "Reverting configuration…"
+msgstr ""
+
msgid "Root"
msgstr "Raíz"
msgid "Save & Apply"
msgstr "Guardar y aplicar"
-msgid "Save & Apply"
-msgstr "Guardar y aplicar"
-
msgid "Scan"
msgstr "Explorar"
msgid "Size (.ipk)"
msgstr ""
+msgid "Size of DNS query cache"
+msgstr ""
+
msgid "Skip"
msgstr "Saltar"
msgid "Source routing"
msgstr ""
-msgid "Specifies the button state to handle"
-msgstr "Especifica el estado de botón a manejar"
-
msgid "Specifies the directory the device is attached to"
msgstr "Especifica el directorio al que está enlazado el dispositivo"
msgid "Start priority"
msgstr "Prioridad de arranque"
+msgid "Starting configuration apply…"
+msgstr ""
+
msgid "Startup"
msgstr "Arranque"
"Switch %q has an unknown topology - the VLAN settings might not be accurate."
msgstr ""
+msgid "Switch Port Mask"
+msgstr ""
+
msgid "Switch VLAN"
msgstr ""
msgstr ""
msgid ""
+"The device could not be reached within %d seconds after applying the pending "
+"changes, which caused the configuration to be rolled back for safety "
+"reasons. If you believe that the configuration changes are correct "
+"nonetheless, perform an unchecked configuration apply. Alternatively, you "
+"can dismiss this warning and edit changes before attempting to apply again, "
+"or revert all pending changes to keep the currently working configuration "
+"state."
+msgstr ""
+
+msgid ""
"The device file of the memory or partition (<abbr title=\"for example\">e.g."
"</abbr> <code>/dev/sda1</code>)"
msgstr ""
"coinciden con los del original.<br />Pulse \"Proceder\" para empezar el "
"grabado."
-msgid "The following changes have been committed"
-msgstr "Se han hecho los siguientes cambios"
-
msgid "The following changes have been reverted"
msgstr "Se han anulado los siguientes cambios"
msgid "There are no active leases."
msgstr "Sin cesiones activas."
-msgid "There are no pending changes to apply!"
-msgstr "¡No hay cambios pendientes!"
+msgid "There are no changes to apply."
+msgstr ""
msgid "There are no pending changes to revert!"
msgstr "¡No hay cambios a anular!"
msgid ""
"This is the local endpoint address assigned by the tunnel broker, it usually "
-"ends with <code>:2</code>"
+"ends with <code>...:2/64</code>"
msgstr ""
"Esta es la dirección de punto final asignada por el broker del túnel, suele "
-"terminar con <code>:2</code>"
+"terminar con <code>...:2/64</code>"
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
"their status."
msgstr "Procesos de sistema que se están ejecutando actualmente y su estado."
-msgid "This page allows the configuration of custom button actions"
-msgstr "Configuración de acciones personalizadas para los botones"
-
msgid "This page gives an overview over currently active network connections."
msgstr "Conexiones de red activas."
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
-"em> indentifies the host, the <em>IPv4-Address</em> specifies to the fixed "
-"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
-"requesting host. The optional <em>Lease time</em> can be used to set non-"
+"em> identifies the host, the <em>IPv4-Address</em> specifies the fixed "
+"address to use, and the <em>Hostname</em> is assigned as a symbolic name to "
+"the requesting host. The optional <em>Lease time</em> can be used to set non-"
"standard host-specific lease time, e.g. 12h, 3d or infinite."
msgstr ""
"Pulse el botón <em>Añadir</em> para insertar una nueva cesión. <em>Dirección "
msgid "Waiting for command to complete..."
msgstr "Esperando a que termine el comando..."
+msgid "Waiting for configuration to get applied… %ds"
+msgstr ""
+
msgid "Waiting for device..."
msgstr ""
msgid "overlay"
msgstr ""
+msgid "random"
+msgstr ""
+
msgid "relay mode"
msgstr ""
msgid "« Back"
msgstr "« Volver"
+#~ msgid "Apply"
+#~ msgstr "Aplicar"
+
+#~ msgid "Applying changes"
+#~ msgstr "Aplicando cambios"
+
+#~ msgid "Configuration applied."
+#~ msgstr "Configuración establecida."
+
+#~ msgid "Save & Apply"
+#~ msgstr "Guardar y aplicar"
+
+#~ msgid "The following changes have been committed"
+#~ msgstr "Se han hecho los siguientes cambios"
+
+#~ msgid "There are no pending changes to apply!"
+#~ msgstr "¡No hay cambios pendientes!"
+
+#~ msgid "Action"
+#~ msgstr "Acción"
+
+#~ msgid "Buttons"
+#~ msgstr "Botones"
+
+#~ msgid "Handler"
+#~ msgstr "Manejador"
+
+#~ msgid "Maximum hold time"
+#~ msgstr "Pausa máxima de transmisión"
+
+#~ msgid "Minimum hold time"
+#~ msgstr "Pausa mínima de espera"
+
+#~ msgid "Path to executable which handles the button event"
+#~ msgstr "Ruta al ejecutable que maneja el evento button"
+
+#~ msgid "Specifies the button state to handle"
+#~ msgstr "Especifica el estado de botón a manejar"
+
+#~ msgid "This page allows the configuration of custom button actions"
+#~ msgstr "Configuración de acciones personalizadas para los botones"
+
#~ msgid "Leasetime"
#~ msgstr "Tiempo de cesión"
projects / project / luci.git / blobdiff