Fix a typo in IPv6 configuration page

[project/luci.git] / modules / admin-full / luasrc / model / cbi / admin_network / ipv6.lua

diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/ipv6.lua b/modules/admin-full/luasrc/model/cbi/admin_network/ipv6.lua
index 951b607..257173e 100644 (file)
--- a/modules/admin-full/luasrc/model/cbi/admin_network/ipv6.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/ipv6.lua
@@ -9,20 +9,23 @@ You may obtain a copy of the License at
 
        http://www.apache.org/licenses/LICENSE-2.0
 
-$Id$
 ]]--
 
-local m = Map("6relayd", translate("IPv6 RA and DHCPv6"),
-       translate("6relayd is a lightweight router advertisement daemon and provides " ..
-        "stateless DHCPv6 service where size matters. It can also be used as a relay " ..
-        "for the aforementioned services."))
+local m, s, o
 
-local s = m:section(TypedSection, "server", translate("Server Settings"))
-s.addremove = true
+m = Map("6relayd", translate("IPv6 RA and DHCPv6"),
+       translate("6relayd is a daemon for serving and relaying IPv6 management protocols to "..
+       "configure clients and downstream routers. "..
+       "It provides server services for RA, stateless and stateful DHCPv6, "..
+       "prefix delegation and can be used to relay RA, DHCPv6 and NDP between routed "..
+       "(non-bridged) interfaces in case no delegated prefixes are available."))
 
+s = m:section(TypedSection, "server", translate("Server Settings"))
+s.addremove = false
+s.anonymous = true
 
 
-local o = s:option(DynamicList, "network", translate("Service Interfaces"),
+o = s:option(DynamicList, "network", translate("Service Interfaces"),
        translate("Interfaces to provide services on or to relay services to."))
 o.widget = "checkbox"
 o.template = "cbi/network_netlist"
@@ -41,26 +44,59 @@ o:value("", translate("disabled"))
 o:value("server", translate("server mode"))
 o:value("relay", translate("relay mode"))
 
+o = s:option(ListValue, "management_level", translate("DHCPv6-Mode"))
+o:value("", translate("stateless"))
+o:value("1", translate("stateless + stateful"))
+o:value("2", translate("stateful-only"))
+o:depends("dhcpv6", "server")
+
 o = s:option(ListValue, "ndp", translate("NDP-Proxy"))
 o:value("", translate("disabled"))
 o:value("relay", translate("relay mode"))
 
-o = s:option(MultiValue, "fallback_relay", translate("Fallback to relay"),
+o = s:option(Flag, "fallback_relay", translate("Fallback to relay"),
        translate("Relay services from master to server interfaces when there is no public prefix available."))
-o:value("rd", translate("Router Advertisement"))
-o:value("dhcpv6", translate("DHCPV6"))
-o:value("ndp", translate("NDP-Proxy"))
+o.enabled = "rd dhcpv6 ndp"
+o.disabled = ""
 
 o = s:option(Value, "master", translate("Master Interface"),
        translate("Specifies the master interface for services that are relayed."))
 o.template = "cbi/network_netlist"
 o.nocreate = true
+o:depends("rd", "relay")
+o:depends("dhcpv6", "relay")
+o:depends("ndp", "relay")
+o:depends("fallback_relay", "rd dhcpv6 ndp")
 
 o = s:option(Flag, "always_rewrite_dns", translate("Always announce local DNS"),
        translate("Announce the local router as DNS server even in relay mode."))
+o:depends("rd", "relay")
+o:depends("dhcpv6", "relay")
+o:depends("fallback_relay", "rd dhcpv6 ndp")
+
+o = s:option(Value, "rewrite_dns_addr", translate("Override announced DNS-server"),
+       translate("Announce a custom DNS-server instead of the local one."))
 
 o = s:option(Flag, "always_assume_default", translate("Always announce default router"),
        translate("Announce as default router even if no public prefix is available."))
 o:depends("rd", "server")
 
+o = s:option(Flag, "compat_ula", translate("ULA-preference compatibility"),
+       translate("Work around IPv6 address-selection issues of some devices."))
+
+m:section(SimpleSection).template = "admin_network/lease_status"
+
+s = m:section(TypedSection, "lease", translate("Static Leases"),
+        translate("Static leases are used to assign fixed IPv6 Interface-IDs to clients. Interface-IDs are appended to available prefixes to form IPv6-addresses. " ..
+            " (e.g. a prefix of 2001:db80::/64 combined with Interface-ID 123456 will form the address 2001:db80::12:3456)") .. "<br />" ..
+        translate("Use the <em>Add</em> Button to add a new lease entry. The <em>DUID</em> " ..
+            "indentifies the host, the <em>Interface-ID</em> specifies the ID to use in addresses."))
+
+s.addremove = true
+s.anonymous = true
+s.template = "cbi/tblsection"
+
+s:option(Value, "duid", translate("DUID")).optional = false
+s:option(Value, "id", translate("Interface-ID")).optional = false
+
 return m