]]--
local fs = require "nixio.fs"
+local ut = require "luci.util"
local nw = require "luci.model.network"
local fw = require "luci.model.firewall"
local has_pppoa = fs.glob("/usr/lib/pppd/*/pppoatm.so")()
local has_ipv6 = fs.access("/proc/net/ipv6_route")
local has_6in4 = fs.access("/lib/network/6in4.sh")
+local has_6to4 = fs.access("/lib/network/6to4.sh")
m = Map("network", translate("Interfaces") .. " - " .. arg[1]:upper(), translate("On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: <samp>eth0.1</samp>)."))
m:chain("firewall")
nw.init(m.uci)
fw.init(m.uci)
+
+local net = nw:get_network(arg[1])
+
+-- redirect to overview page if network does not exist anymore (e.g. after a revert)
+if not net then
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/network"))
+ return
+end
+
+local ifc = net:get_interfaces()[1]
+
s = m:section(NamedSection, arg[1], "interface", translate("Common Configuration"))
s.addremove = false
if has_ipv6 then s:tab("ipv6", translate("IPv6 Setup")) end
if has_pppd then s:tab("ppp", translate("PPP Settings")) end
if has_pppoa then s:tab("atm", translate("ATM Settings")) end
-if has_6in4 then s:tab("tunnel", translate("Tunnel Settings")) end
+if has_6in4 or has_6to4 then s:tab("tunnel", translate("Tunnel Settings")) end
s:tab("physical", translate("Physical Settings"))
s:tab("firewall", translate("Firewall Settings"))
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/iface_status"
+st.network = arg[1]
+
--[[
back = s:taboption("general", DummyValue, "_overview", translate("Overview"))
back.value = ""
if has_3g then p:value("3g", "UMTS/3G") end
if has_pptp then p:value("pptp", "PPTP") end
if has_6in4 then p:value("6in4", "6in4") end
+if has_6to4 then p:value("6to4", "6to4") end
p:value("none", translate("none"))
if not ( has_pppd and has_pppoe and has_pppoa and has_3g and has_pptp ) then
stp = s:taboption("physical", Flag, "stp", translate("Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"),
translate("Enables the Spanning Tree Protocol on this bridge"))
-stp:depends("type", "1")
+stp:depends("type", "bridge")
stp.rmempty = true
ifname_single = s:taboption("physical", Value, "ifname_single", translate("Interface"))
for _, i in ipairs(n:get_interfaces()) do
n:del_interface(i)
end
- n:add_interface(val)
+
+ for i in ut.imatch(val) do
+ n:add_interface(i)
+
+ -- if this is not a bridge, only assign first interface
+ if self.option == "ifname_single" then
+ break
+ end
+ end
end
end
-
-ifname_multi = s:taboption("physical", MultiValue, "ifname_multi", translate("Interface"))
+ifname_multi = s:taboption("physical", Value, "ifname_multi", translate("Interface"))
ifname_multi.template = "cbi/network_ifacelist"
ifname_multi.nobridges = true
ifname_multi.network = arg[1]
ifname_multi.widget = "checkbox"
-ifname_multi:depends("type", "1")
+ifname_multi:depends("type", "bridge")
ifname_multi.cfgvalue = ifname_single.cfgvalue
ifname_multi.write = ifname_single.write
-for _, d in ipairs(nw:get_interfaces()) do
- if not d:is_bridge() then
- ifname_single:value(d:name())
- ifname_multi:value(d:name())
- end
-end
-
-
local fwd_to, fwd_from
fwzone = s:taboption("firewall", Value, "_fwzone",
end
ipaddr = s:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
-ipaddr.rmempty = true
+ipaddr.optional = true
ipaddr.datatype = "ip4addr"
ipaddr:depends("proto", "static")
nm = s:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
-nm.rmempty = true
+nm.optional = true
nm.datatype = "ip4addr"
nm:depends("proto", "static")
nm:value("255.255.255.0")
if has_ipv6 then
ip6addr = s:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
- ip6addr.rmempty = true
+ ip6addr.optional = true
ip6addr.datatype = "ip6addr"
ip6addr:depends("proto", "static")
ip6addr:depends("proto", "6in4")
ip6gw:depends("proto", "static")
end
-dns = s:taboption("general", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"),
- translate("You can specify multiple DNS servers separated by space here. Servers entered here will override " ..
+dns = s:taboption("general", DynamicList, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"),
+ translate("You can specify multiple DNS servers here, press enter to add a new entry. Servers entered here will override " ..
"automatically assigned ones."))
dns.optional = true
+dns.cast = "string"
dns.datatype = "ipaddr"
-dns:depends("peerdns", "")
+dns:depends({ peerdns = "", proto = "static" })
+dns:depends({ peerdns = "", proto = "dhcp" })
+dns:depends({ peerdns = "", proto = "pppoe" })
+dns:depends({ peerdns = "", proto = "pppoa" })
+dns:depends({ peerdns = "", proto = "none" })
mtu = s:taboption("physical", Value, "mtu", "MTU")
mtu.optional = true
mtu.datatype = "uinteger"
+mtu.placeholder = 1500
srv = s:taboption("general", Value, "server", translate("<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"))
srv:depends("proto", "pptp")
peer.optional = false
peer.datatype = "ip4addr"
peer:depends("proto", "6in4")
+end
+if has_6in4 or has_6to4 then
ttl = s:taboption("physical", Value, "ttl", translate("TTL"))
ttl.default = "64"
ttl.optional = true
ttl.datatype = "uinteger"
ttl:depends("proto", "6in4")
+ ttl:depends("proto", "6to4")
+end
+
+if has_6to4 then
+ advi = s:taboption("general", Value, "adv_interface", translate("Advertise IPv6 on network"))
+ advi.widget = "radio"
+ advi.exclude = arg[1]
+ advi.default = "lan"
+ advi.template = "cbi/network_netlist"
+ advi.nocreate = true
+ advi.nobridges = true
+ advi:depends("proto", "6to4")
+
+ advn = s:taboption("general", Value, "adv_subnet", translate("Advertised network ID"), translate("Allowed range is 1 to FFFF"))
+ advn.default = "1"
+ advn:depends("proto", "6to4")
+
+ function advn.write(self, section, value)
+ value = tonumber(value, 16) or 1
+
+ if value > 65535 then value = 65535
+ elseif value < 1 then value = 1 end
+
+ Value.write(self, section, "%X" % value)
+ end
end
mac = s:taboption("physical", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
mac:depends("proto", "none")
mac:depends("proto", "static")
mac:depends("proto", "dhcp")
+mac.placeholder = ifc and ifc:mac():upper()
if has_3g then
service = s:taboption("general", ListValue, "service", translate("Service type"))
pass:depends("proto", "ppp")
pass:depends("proto", "3g")
pass:depends("proto", "6in4")
+end
+if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
ka = s:taboption("ppp", Value, "keepalive",
translate("Keep-Alive"),
translate("Number of failed connection tests to initiate automatic reconnect")