<i18n:msg xml:id="a_s_sshkeys1">Here you can paste public <abbr title="Secure Shell">SSH</abbr>-Keys (one per line) for <abbr title="Secure Shell">SSH</abbr> public-key authentication.</i18n:msg>
<i18n:msg xml:id="a_s_fstab_mountpoints">Mount Points</i18n:msg>
<i18n:msg xml:id="a_s_fstab_mountpoints1">Mount Points define at which point a memory device will be attached to the filesystem</i18n:msg>
-<i18n:msg xml:id="a_s_fstab_active">Mounted file systems"</i18n:msg>
-<i18n:msg xml:id="a_s_fstab_used">Used"</i18n:msg>
-<i18n:msg xml:id="a_s_fstab_avail">Available"</i18n:msg>
+<i18n:msg xml:id="a_s_fstab_active">Mounted file systems</i18n:msg>
+<i18n:msg xml:id="a_s_fstab_used">Used</i18n:msg>
+<i18n:msg xml:id="a_s_fstab_avail">Available</i18n:msg>
<i18n:msg xml:id="a_s_fstab_mountpoint">Mount Point</i18n:msg>
<i18n:msg xml:id="a_s_fstab_device1">The device file of the memory or partition (<abbr title="for example">e.g.</abbr> <code>/dev/sda1</code>)</i18n:msg>
<i18n:msg xml:id="a_s_fstab_fs1">The filesystem that was used to format the memory (<abbr title="for example">e.g.</abbr> <samp><abbr title="Third Extended Filesystem">ext3</abbr></samp>)</i18n:msg>
<i18n:msg xml:id="a_s_fstab_swap1">If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable <abbr title="Random Access Memory">RAM</abbr>. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the <abbr title="Random Access Memory">RAM</abbr>.</i18n:msg>
<i18n:msg xml:id="a_s_flash_flashed">Firmware successfully flashed. Rebooting device...</i18n:msg>
<i18n:msg xml:id="a_s_flash_flasherr">Failed to flash</i18n:msg>
-<i18n:msg xml:id="a_s_flash_fwimage">Firmwareimage</i18n:msg>
+<i18n:msg xml:id="a_s_flash_fwimage">Firmware image</i18n:msg>
<i18n:msg xml:id="a_s_flash_received">Image received. About to start flashing process. DO NOT POWER OFF THE DEVICE!</i18n:msg>
<i18n:msg xml:id="a_s_flash_inprogress">Writing firmware...</i18n:msg>
<i18n:msg xml:id="a_s_flash_fwupgrade">Flash Firmware</i18n:msg>
<i18n:msg xml:id="dhcp_dnsmasq_dhcpleasemax"><abbr title="maximal">max.</abbr> <abbr title="Dynamic Host Configuration Protocol">DHCP</abbr>-Leases</i18n:msg>
<i18n:msg xml:id="dhcp_dnsmasq_addnhosts">additional hostfile</i18n:msg>
<i18n:msg xml:id="dhcp_dnsmasq_queryport">query port</i18n:msg>
+<i18n:msg xml:id="dhcp_dnsmasq_enabletftp">Enable TFTP-Server</i18n:msg>
+<i18n:msg xml:id="dhcp_dnsmasq_tftproot">TFTP-Server Root</i18n:msg>
+<i18n:msg xml:id="dhcp_dnsmasq_dhcpboot">Network Boot Image</i18n:msg>
<i18n:msg xml:id="a_n_switch">Switch</i18n:msg>
+<i18n:msg xml:id="a_n_conntrack">Active Connections</i18n:msg>
+<i18n:msg xml:id="a_n_conntrack_desc">This page gives an overview over currently active network connections.</i18n:msg>
<i18n:msg xml:id="a_n_routes">Routes</i18n:msg>
<i18n:msg xml:id="a_network1">In this area you find all network-related settings.</i18n:msg>
<i18n:msg xml:id="a_network2">On most routers the network switch can be freely configured and splitted up into several <abbr title="Virtual Local Area Network">VLAN</abbr>s.</i18n:msg>
<i18n:msg xml:id="dhcp_dhcp_force">Force</i18n:msg>
<i18n:msg xml:id="dhcp_dhcp_start_desc">first address (last octet)</i18n:msg>
<i18n:msg xml:id="dhcp_dhcp_limit_desc">number of leased addresses -1</i18n:msg>
+<i18n:msg xml:id="dhcp_dhcp_dhcpoption">DHCP-Options</i18n:msg>
+<i18n:msg xml:id="dhcp_dhcp_dhcpoption_desc">See "dnsmasq --help dhcp" for a list of available options.</i18n:msg>
<i18n:msg xml:id="dhcp_leases">Leases</i18n:msg>
<i18n:msg xml:id="luci_ethers">Static Leases</i18n:msg>
<i18n:msg xml:id="dhcp_timeremain">Leasetime remaining</i18n:msg>
<i18n:msg xml:id="dhcp_leases_active">Active Leases</i18n:msg>
<i18n:msg xml:id="a_n_ptp">Point-to-Point Connections</i18n:msg>
<i18n:msg xml:id="a_n_ptp1">Point-to-Point connections with <abbr title="Point-to-Point Protocol over Ethernet">PPPoE</abbr> or <abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr> are often used to connect a device over <abbr title="Digital Subscriber Line">DSL</abbr> or similar technologies to an internet access point.</i18n:msg>
+<i18n:msg xml:id="network_interface_prereq">You need to install "comgt" for UMTS/GPRS, "ppp-mod-pppoe" for PPPoE, "ppp-mod-pppoa" for PPPoA or "pptp" for PPtP support</i18n:msg>
+<i18n:msg xml:id="network_interface_prereq_mini">You need to install "ppp-mod-pppoe" for PPPoE or "pptp" for PPtP support</i18n:msg>
<i18n:msg xml:id="network_interface_server"><abbr title="Point-to-Point Tunneling Protocol">PPTP</abbr>-Server</i18n:msg>
<i18n:msg xml:id="network_interface_demand">Automatic Disconnect</i18n:msg>
<i18n:msg xml:id="network_interface_demand_desc">Time (in seconds) after which an unused connection will be closed</i18n:msg>
<i18n:msg xml:id="network_interface_keepalive">Keep-Alive</i18n:msg>
<i18n:msg xml:id="network_interface_keepalive_desc">Number of failed connection tests to initiate automatic reconnect</i18n:msg>
+<i18n:msg xml:id="network_interface_device">Modem device</i18n:msg>
+<i18n:msg xml:id="network_interface_device_desc">The device node of your modem, e.g. /dev/ttyUSB0</i18n:msg>
+<i18n:msg xml:id="network_interface_defaultroute">Replace default route</i18n:msg>
+<i18n:msg xml:id="network_interface_defaultroute_desc">Let pppd replace the current default route to use the PPP interface after successful connect</i18n:msg>
+<i18n:msg xml:id="network_interface_peerdns">Use peer DNS</i18n:msg>
+<i18n:msg xml:id="network_interface_peerdns_desc">Configure the local DNS server to use the name servers adverticed by the PPP peer</i18n:msg>
+<i18n:msg xml:id="network_interface_ipv6">Enable IPv6 on PPP link</i18n:msg>
+<i18n:msg xml:id="network_interface_connect">Connect script</i18n:msg>
+<i18n:msg xml:id="network_interface_connect_desc">Let pppd run this script after establishing the PPP link</i18n:msg>
+<i18n:msg xml:id="network_interface_disconnect">Disconnect script</i18n:msg>
+<i18n:msg xml:id="network_interface_disconnect_desc">Let pppd run this script before tearing down the PPP link</i18n:msg>
+<i18n:msg xml:id="network_interface_pppd_options">Additional pppd options</i18n:msg>
+<i18n:msg xml:id="network_interface_pppd_options_desc">Specify additional command line arguments for pppd here</i18n:msg>
+<i18n:msg xml:id="network_interface_apn">Access point (APN)</i18n:msg>
+<i18n:msg xml:id="network_interface_pincode">PIN code</i18n:msg>
+<i18n:msg xml:id="network_interface_pincode_desc">Make sure that you provide the correct pin code here or you might lock your sim card!</i18n:msg>
+<i18n:msg xml:id="network_interface_service">Service type</i18n:msg>
+<i18n:msg xml:id="network_interface_maxwait">Setup wait time</i18n:msg>
+<i18n:msg xml:id="network_interface_maxwait_desc">Seconds to wait for the modem to become ready before attempting to connect</i18n:msg>
<i18n:msg xml:id="a_n_r_routes1">Routes specify over which interface and gateway a certain host or network can be reached.</i18n:msg>
<i18n:msg xml:id="a_n_routes_static">Static Routes</i18n:msg>
<i18n:msg xml:id="a_n_routes_kernel4">Active <abbr title="Internet Protocol Version 4">IPv4</abbr>-Routes</i18n:msg>
projects / project / luci.git / blobdiff