a_s_sshkeys1 = 'Here you can paste public <abbr title="Secure Shell">SSH</abbr>-Keys (one per line) for <abbr title="Secure Shell">SSH</abbr> public-key authentication.'
a_s_fstab_mountpoints = 'Mount Points'
a_s_fstab_mountpoints1 = 'Mount Points define at which point a memory device will be attached to the filesystem'
-a_s_fstab_active = 'Mounted file systems"'
-a_s_fstab_used = 'Used"'
-a_s_fstab_avail = 'Available"'
+a_s_fstab_active = 'Mounted file systems'
+a_s_fstab_used = 'Used'
+a_s_fstab_avail = 'Available'
a_s_fstab_mountpoint = 'Mount Point'
a_s_fstab_device1 = 'The device file of the memory or partition (<abbr title="for example">e.g.</abbr> <code>/dev/sda1</code>)'
a_s_fstab_fs1 = 'The filesystem that was used to format the memory (<abbr title="for example">e.g.</abbr> <samp><abbr title="Third Extended Filesystem">ext3</abbr></samp>)'
a_s_fstab_swap1 = 'If your physical memory is insufficient unused data can be temporarily swapped to a swap-device resulting in a higher amount of usable <abbr title="Random Access Memory">RAM</abbr>. Be aware that swapping data is a very slow process as the swap-device cannot be accessed with the high datarates of the <abbr title="Random Access Memory">RAM</abbr>.'
a_s_flash_flashed = 'Firmware successfully flashed. Rebooting device...'
a_s_flash_flasherr = 'Failed to flash'
-a_s_flash_fwimage = 'Firmwareimage'
+a_s_flash_fwimage = 'Firmware image'
a_s_flash_received = 'Image received. About to start flashing process. DO NOT POWER OFF THE DEVICE!'
-a_s_flash_inprogress = 'Now writing firmware. Depending on your hardware this can take up to 20 minutes or more. Please check your device from time to time to see whether the writing process has completed.'
+a_s_flash_inprogress = 'Writing firmware...'
a_s_flash_fwupgrade = 'Flash Firmware'
a_s_flash_keepcfg = 'Keep configuration files'
a_s_flash_notimplemented = 'Sorry, this function is not (yet) available for your platform.'
dhcp_dnsmasq_addnhosts = 'additional hostfile'
dhcp_dnsmasq_queryport = 'query port'
a_n_switch = 'Switch'
+a_n_conntrack = 'Active Connections'
+a_n_conntrack_desc = 'This page gives an overview over currently active network connections.'
a_n_routes = 'Routes'
a_network1 = 'In this area you find all network-related settings.'
a_network2 = 'On most routers the network switch can be freely configured and splitted up into several <abbr title="Virtual Local Area Network">VLAN</abbr>s.'
network_interface_demand_desc = 'Time (in seconds) after which an unused connection will be closed'
network_interface_keepalive = 'Keep-Alive'
network_interface_keepalive_desc = 'Number of failed connection tests to initiate automatic reconnect'
+network_interface_device = 'Modem device'
+network_interface_device_desc = 'The device node of your modem, e.g. /dev/ttyUSB0'
+network_interface_defaultroute = 'Replace default route'
+network_interface_defaultroute_desc = 'Let pppd replace the current default route to use the PPP interface after successful connect'
+network_interface_peerdns = 'Use peer DNS'
+network_interface_peerdns_desc = 'Configure the local DNS server to use the name servers adverticed by the PPP peer'
+network_interface_ipv6 = 'Enable IPv6 on PPP link'
+network_interface_connect = 'Connect script'
+network_interface_connect_desc = 'Let pppd run this script after establishing the PPP link'
+network_interface_disconnect = 'Disconnect script'
+network_interface_disconnect_desc = 'Let pppd run this script before tearing down the PPP link'
+network_interface_pppd_options = 'Additional pppd options'
+network_interface_pppd_options_desc = 'Specify additional command line arguments for pppd here'
a_n_r_routes1 = 'Routes specify over which interface and gateway a certain host or network can be reached.'
a_n_routes_static = 'Static Routes'
a_n_routes_kernel4 = 'Active <abbr title="Internet Protocol Version 4">IPv4</abbr>-Routes'
projects / project / luci.git / blobdiff