+a_w_ap = "Access Point"
+a_w_adhoc = "Ad-Hoc"
+a_w_client = "Client"
+a_w_wds = "WDS"
+
+dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
+dhcp_dnsmasq_domainneeded = "Domain required"
+dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
+dhcp_dnsmasq_authoritative = "Authoritative"
+dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
+dhcp_dnsmasq_boguspriv = "Filter private"
+dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
+dhcp_dnsmasq_filterwin2k = "Filter useless"
+dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
+dhcp_dnsmasq_localisequeries = "Localise queries"
+dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
+dhcp_dnsmasq_local = "Local Server"
+dhcp_dnsmasq_domain = "Local Domain"
+dhcp_dnsmasq_expandhosts = "Expand Hosts"
+dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
+dhcp_dnsmasq_nonegcache = "don't cache unknown"
+dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
+dhcp_dnsmasq_readethers = "Use /etc/ethers"
+dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
+dhcp_dnsmasq_leasefile = "Leasefile"
+dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
+dhcp_dnsmasq_resolvfile = "Resolvfile"
+dhcp_dnsmasq_resolvfile_desc = "local DNS file"
+dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
+dhcp_dnsmasq_strictorder = "Strict order"
+dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
+dhcp_dnsmasq_logqueries = "Log queries"
+dhcp_dnsmasq_noresolv = "Ignore resolve file"
+dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
+dhcp_dnsmasq_port = "DNS-Port"
+dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
+dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
+dhcp_dnsmasq_addnhosts = "additional hostfile"
+dhcp_dnsmasq_queryport = "query port"
+
+a_n_switch = "Switch"
+a_n_routes = "Routes"
+
+a_network1 = "In this area you find all network-related settings."
+a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
+a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
+a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
+a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
+
+a_n_switch1 = [[The network ports on your router can be combined to several VLANs
+in which computers can communicate directly with each other.
+VLANs are often used to separate different network segments.
+Often there is by default one Uplink port for a connection to the next greater network like the internet
+and other ports for a local network.]]
+network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
+The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
+On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
+
+a_n_ifaces1 = [[On this page you can configure the network interfaces.
+You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
+of several network interfaces separated by spaces.
+You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
+a_n_i_bridge = "Bridge interfaces"
+a_n_i_bridge1 = "creates a bridge over specified interface(s)"
+
+dhcp_desc = [[With DHCP network members can automatically receive
+their network settings (IP-address, netmaske, DNS-server, ...).]]
+dhcp_dhcp_leasetime = "Leasetime"
+dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
+dhcp_dhcp_ignore = "Ignore interface"
+dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
+dhcp_dhcp_force = "Force"
+dhcp_dhcp_start_desc = "first address (last octet)"
+dhcp_dhcp_limit_desc = "number of leased addresses -1"
+
+luci_ethers = "Static Leases"
+
+a_n_ptp = "Point-to-Point Connections"
+a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
+over DSL or similar technologies to an internet access point.]]
+network_interface_server = "PPTP-Server"
+network_interface_demand = "Automatic Disconnect"
+network_interface_demand_desc = "Time (in s) after which an unused connection will be closed"
+network_interface_keepalive = "Keep-Alive"
+network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
+
+a_n_routes = "Static Routes"
+a_n_routes1 = [[With Static Routes you can specify through which
+interface and gateway a certain host or network can be reached.]]
+a_n_r_target1 = "host-IP or network"
+a_n_r_netmask1 = "if target is a network"
+
+m_n_local = "Local Network"
+m_n_inet = "Internet Connection"
+m_n_route = "Route"
+m_n_brdige = "Bridge"
+
+m_w_ap = "Provide (Access Point)"
+m_w_adhoc = "Independent (Ad-Hoc)"
+m_w_client = "Join (Client)"
+m_w_wds = "Distributed (WDS)"
+m_w_clientmode = "Clientmode"
+
+system_system_logsize = "System log buffer size"
+system_system_logip = "External system log server"
+system_system_conloglevel = "Log output level"
+system_system_conloglevel_desc = "Level of log messages on the console"
+
+m_i_processor = "Processor"
+m_i_memory = "Memory"
+m_i_systemtime = "Local Time"
+m_i_uptime = "Uptime"
+
+m_n_d_firstaddress = "First leased address"
+m_n_d_numleases = "Number of leased addresses"
+
+routingtable = "Routing table"
+wlanscan = "Wifi scan"
+
+frequency = "Frequency"
+power = "Power"
+noise = "Noise"
+signal = "Signal"
+link = "Link"
+frag = "Frag."
+rts = "RTS"
+bitrate = "Bitrate"
+
+m_n_keepalive = "automatically reconnect"
+m_n_dialondemand = "disconnect when idle for"
+m_n_pptp_server = "PPTP-Server"
+
+leds = "LED Configuration"
+leds_desc = "Customizes the behaviour of the device LEDs if possible."
+system_led_name = "LED Name"
+system_led_sysfs = "LED Device"
+system_led_default = "Default state"
+system_led_default_desc = "ticked = on"
+system_led_trigger = "Trigger"
+system_led_trigger_none = "None"
+system_led_trigger_defaulton = "Default On"
+system_led_trigger_timer = "Timer"
+system_led_trigger_heartbeat = "Heartbeat (Load Average)"
+system_led_trigger_netdev = "Network Device"
+system_led_delayoff = "Off-State Delay"
+system_led_delayoff_desc = "Time (in ms) the LED is off"
+system_led_delayon = "On-State Delay"
+system_led_delayon_desc = "Time (in ms) the LED is on"
+system_led_dev = "Device"
+system_led_mode = "Trigger Mode"
+system_led_mode_link = "Link On"
+system_led_mode_tx = "Transmit"
+system_led_mode_rx = "Receive"
\ No newline at end of file