lantiq: fix board detection helpers
[openwrt.git] / target /
2013-04-06 juhosggeneric: rtl8367: add compatible string with vendor...
2013-04-06 juhosggeneric: rtl8367b: fix rtl8367b_extif_init_of
2013-04-06 juhosglinux/3.8: add more missing symbols
2013-04-06 juhosglinux/3.8: add missing symbol
2013-04-06 juhosgramips: remove spi node from RTN56.dts
2013-04-06 juhosgramips: fix ethernet switch node in RTN56U.dts
2013-04-06 juhosgramips: rt3883: enable the RTL8367 driver
2013-04-06 juhosggeneric: rtl8367: allow to load extif config from OF
2013-04-06 juhosggeneric: rtl8367: fix a typo in MODULE_DEVICE_TABLE...
2013-04-06 juhosggeneric: rtl8367: add vendor prefix to the compatible...
2013-04-06 juhosgramips: rt3883: sync 3.8 config
2013-04-06 blogic[ramips] fix typo pinmmux -> pinmux
2013-04-06 juhosgkernel: update linux 3.8 to 3.8.6
2013-04-06 juhosgrefresh kernel configs with kconfig.pl
2013-04-05 blogic[ramips] fix dir-615 h1 network config
2013-04-05 blogic[ramips] fix typo that made gpiomuxing fail
2013-04-05 florianmalta: add le64 and be64 sub targets
2013-04-05 florianmalta: move 32-bits options to subtarget config
2013-04-05 florianmalta: move endianness kernel configuration to subtarget
2013-04-05 florianbuildroot: factor knowledge of a 64bits architecture
2013-04-05 florianmalta: enable mips16 feature flag
2013-04-05 florianbuildroot: allow enabling MIPS16 user-space build
2013-04-03 blogic[lantiq] Migrate lantiq platform to common led helper...
2013-04-03 blogic[lantiq] add a missing patch that makes board detection...
2013-04-03 blogic[kernel] Patch for invoking (pre)init
2013-04-03 blogic[ramips] add profile for tenda w150m board
2013-04-03 blogic[ramips] fix ALL5002 default package selection
2013-04-03 blogic[ramips] Build WW factory image for DAP-1350
2013-04-03 blogic[ramips] add Huawei D105
2013-04-03 blogic[ramips] add profile for the Edimax 3g-6200NL board
2013-04-03 blogic[ramips] there is no ttyS1 console
2013-04-03 blogic[ramips] make v3.8 the default
2013-04-03 blogic[ramips] add new image/Makefile
2013-04-03 blogic[ramips] add the dts files that describe the boards...
2013-04-03 blogic[ramips] fix upvel profile names
2013-04-03 blogic[ramips] fix rt3883 config-3.8
2013-04-03 blogic[ramips] fix rt305x config-3.8
2013-04-03 blogic[ramips] mark rt288x broken until the test hardware...
2013-04-03 blogic[ramips] add patches for v3.8
2013-04-03 blogic[ramips] remove old ralink 3.8 patches
2013-04-03 blogic[ramips] move files to files-3.7
2013-04-03 blogic[ramips] add feature gpio
2013-04-03 blogic[generic] add OF support to rtl8367b driver
2013-04-03 blogic[generic] make firmware loading work on v3.9
2013-04-01 nbdmpc85xx: enable ath9k and wpad-mini by default
2013-03-27 haukebrcm47xx: generate images for Linksys E.... models
2013-03-27 haukegemini: remove usage of ehci_port_power() it was remove...
2013-03-27 haukebrcm47xx: activate image generation for some Netgear...
2013-03-27 haukebrcm47xx: generate images for more WRT...N models
2013-03-25 kaloz[gemini]: upgrade to 3.9-rc4, disable unsupported boards
2013-03-25 kaloz[generic/3.9]: refresh patches against -rc4
2013-03-25 kaloz[generic/3.9]: add missing symbols
2013-03-25 juhosgar71xx: fix ethernet LEDs on the TL-WDR3500
2013-03-25 juhosgar71xx: add GPIO output select values for AR934x
2013-03-24 juhosgar71xx: add default LED configuration for the WL-WRD3500
2013-03-24 juhosgar71xx: fix USB power GPIO on the TL-WDR3500
2013-03-24 juhosgar71xx: remove numeric suffix of the TL-WDR3500 USB LED
2013-03-24 juhosgar71xx: add diag support for the TL-WDR3500
2013-03-24 juhosgar71xx: add default switch configuration for the TL...
2013-03-24 haukekernel: add missing config options for au1000 target
2013-03-21 haukekernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config...
2013-03-21 haukekernel: REGMAP_SPI should only be selectable when SPI_M...
2013-03-20 haukebrcm47xx: generate images for some more devices
2013-03-20 haukekernel: add some fixes for kernel 3.9
2013-03-20 haukekernel: add some missing config options for kernel 3.9
2013-03-19 floriankernel: make SND_COMPRESS_OFFLOAD symbol visible for...
2013-03-17 florianuml: remove 3.6 kernel patches
2013-03-17 florianuml: remove 3.3. kernel patches
2013-03-17 florianuml: switch to 3.8 kernel
2013-03-17 florianuml: add support for 3.8 kernel
2013-03-17 florianuml: remove 3.2 patches
2013-03-17 florianep93xx: switch to 3.8 kernel
2013-03-17 floriankernel: refresh 3.9 patches
2013-03-17 florianep93xx: add support for 3.8 kernel
2013-03-17 florianep93xx: account for sound soc directory rename in 3.7
2013-03-17 floriankernel: set regmap-core module license
2013-03-17 florianau1000: remove support for 3.3. kernel
2013-03-17 florianau1000: switch to 3.6 kernel
2013-03-17 florianau1000: keep the MTX-1 watchdog pin low during boot
2013-03-17 florianep93xx: remove 3.3 kernel support
2013-03-17 florianmcs814x: use devm_request_and_ioremap in mcs814x-rng...
2013-03-17 florianmcs814x: use devm_request_and_ioremap helper for nuport...
2013-03-17 florianmcs814x: remove PCI code
2013-03-16 florianmcs814x: implement MULTI_IRQ_HANDLER
2013-03-16 florianmcs814x: use the standard device tree binding to repres...
2013-03-15 juhosgmpc85xx: add profile and build image for the TL-WDR4900...
2013-03-15 juhosggeneric: ar8216: start AR8327 switch from the probe...
2013-03-15 juhosggeneric: ar8216: add ar8xxx_start helper
2013-03-15 juhosgmpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
2013-03-15 juhosggeneric: ar8216: add OF configuration support for AR8327
2013-03-15 juhosggeneric: ar8216: separate platform_data based AR8327...
2013-03-15 juhosggeneric: ar8216: don't use platform_data in ar8327_init...
2013-03-15 juhosggeneric: ar8216: move the ar8327_get_port_init_status...
2013-03-15 juhosggeneric: ar8216: simplify and rename ar8327_config_port
2013-03-15 juhosggeneric: ar8216: remove superfluous pdata checks
2013-03-15 juhosgkernel: update linux 3.8 to 3.8.3
2013-03-15 juhosgar71xx: build images for the TL-MR11U v2
2013-03-15 juhosgar71xx: rw2458n - Use eeprom (art) from wifi card
2013-03-15 juhosgar71xx: Error fix in Kernel for MR3420v2 Ethernet Switc...
2013-03-14 blogic[lantiq] ACMP252: fix USB-enable GPIO and use default...
next