ramips: enable the seama mtdsplit parser

[openwrt.git] / target / linux / ramips / mt7621 / config-3.14

diff --git a/target/linux/ramips/mt7621/config-3.14 b/target/linux/ramips/mt7621/config-3.14
index 8a75b3b..c71a847 100644 (file)
--- a/target/linux/ramips/mt7621/config-3.14
+++ b/target/linux/ramips/mt7621/config-3.14
@@ -38,14 +38,6 @@ CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTB_RT_NONE=y
 CONFIG_DTC=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_ESW_DOUBLE_VLAN_TAG=y
-# CONFIG_GE1_MII_AN is not set
-# CONFIG_GE1_MII_FORCE_100 is not set
-# CONFIG_GE1_RGMII_AN is not set
-# CONFIG_GE1_RGMII_FORCE_1000 is not set
-# CONFIG_GE1_RGMII_NONE is not set
-# CONFIG_GE1_RVMII_FORCE_100 is not set
-# CONFIG_GE1_TRGMII_FORCE_1200 is not set
 CONFIG_GENERIC_ATOMIC64=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -57,8 +49,8 @@ CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_GENERIC_SMP_IDLE_THREAD=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
-# CONFIG_GPIO_MT7621 is not set
-CONFIG_GPIO_RALINK=y
+CONFIG_GPIO_MT7621=y
+# CONFIG_GPIO_RALINK is not set
 CONFIG_GPIO_SYSFS=y
 CONFIG_HARDWARE_WATCHPOINTS=y
 CONFIG_HAS_DMA=y
@@ -94,7 +86,6 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=m
 CONFIG_HZ_PERIODIC=y
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -104,7 +95,6 @@ CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_GIC=y
 CONFIG_IRQ_WORK=y
-# CONFIG_LAN_WAN_SUPPORT is not set
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
 CONFIG_MIPS_CMP=y
@@ -122,21 +112,21 @@ CONFIG_MIPS_MT_SMP=y
 CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
 # CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT7621_ASIC=y
-# CONFIG_MT7621_WDT is not set
+CONFIG_MT7621_WDT=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_RALINK=y
 CONFIG_NET_RALINK_GSW_MT7620=y
 CONFIG_NET_RALINK_MDIO=y
 CONFIG_NET_RALINK_MT7620=y
-CONFIG_NLS=m
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
 CONFIG_NR_CPUS=4
 CONFIG_OF=y
@@ -160,22 +150,17 @@ CONFIG_PHYLIB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_RT2880=y
 # CONFIG_PINCTRL_SINGLE is not set
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
 # CONFIG_PREEMPT_RCU is not set
-# CONFIG_RAETH is not set
-# CONFIG_RAETH_NAPI is not set
-# CONFIG_RAETH_TSO is not set
 CONFIG_RALINK=y
-CONFIG_RALINK_MT7621=y
 CONFIG_RALINK_USBPHY=y
 # CONFIG_RALINK_WDT is not set
-CONFIG_RA_NAT_NONE=y
-# CONFIG_RA_NETWORK_TASKLET_BH is not set
-# CONFIG_RA_NETWORK_WORKQUEUE_BH is not set
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
-CONFIG_RT_3052_ESW=y
 CONFIG_SCHED_SMT=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
@@ -192,7 +177,8 @@ CONFIG_SOC_MT7621=y
 # CONFIG_SOC_RT3883 is not set
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
-CONFIG_SPI_RT2880=y
+CONFIG_SPI_MT7621=y
+# CONFIG_SPI_RT2880 is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_SWCONFIG=y
 CONFIG_SYNC_R4K=y
@@ -208,19 +194,15 @@ CONFIG_SYS_SUPPORTS_SCHED_SMT=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TREE_RCU=y
-CONFIG_USB=m
-CONFIG_USB_COMMON=m
 # CONFIG_USB_EHCI_HCD is not set
 CONFIG_USB_MT7621_XHCI_PLATFORM=y
 CONFIG_USB_PHY=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USE_OF=y
-# CONFIG_WAN_AT_P0 is not set
-# CONFIG_WAN_AT_P4 is not set
 CONFIG_WATCHDOG_CORE=y
 CONFIG_WEAK_ORDERING=y
 CONFIG_XPS=y
 CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_MTK_MTD_NAND is not set