ramips: Add support for Netgear EX2700

[openwrt.git] / target / linux / ramips / image / Makefile

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 55b9cf4..a42f8b9 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -22,7 +22,7 @@ define Image/Build/Initramfs
        $(call Image/Build/Profile/$(PROFILE),initramfs)
 endef
 
-DEVICE_VARS += DTS
+DEVICE_VARS += DTS IMAGE_SIZE
 
 loadaddr-y := 0x80000000
 loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
@@ -158,19 +158,19 @@ endef
 
 define MkImageTpl/squashfs
        $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
-       $(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -j \
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -j \
                -o $(KDIR)/$(output_name) \
                -k $(KDIR)/vmlinux-$(1)$(4).bin.lzma \
-               -r $(KDIR)/root.$(1)
-       $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
+               -r $(KDIR)/root.$(1) && \
+               $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
 endef
 
 define MkImageTpl/initramfs
        $(eval output_name=$(IMG_PREFIX)-$(2)-$(1).bin)
-       $(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -c \
+       -$(STAGING_DIR_HOST)/bin/mktplinkfw2 -V "ver. 2.0" -B "$(2)" -c \
                -o $(KDIR)/$(output_name) \
-               -k $(KDIR)/vmlinux-$(1).bin.lzma
-       $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
+               -k $(KDIR)/vmlinux-$(1).bin.lzma && \
+               $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name)
 endef
 
 # $(1), lowercase board name like "mt7620a_v22sg"
@@ -913,6 +913,7 @@ endif
 #
 
 Image/Build/Profile/E1700=$(call BuildFirmware/UMedia/$(1),$(1),e1700,E1700,0x013326)
+Image/Build/Profile/EX2700=$(call BuildFirmware/Default4M/$(1),$(1),ex2700,EX2700)
 Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
 Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
@@ -958,6 +959,7 @@ Image/Build/Profile/TINY-AC=$(call BuildFirmware/Default8M/$(1),$(1),tiny-ac,TIN
 ifeq ($(SUBTARGET),mt7620)
 define Image/Build/Profile/Default
        $(call Image/Build/Profile/E1700,$(1))
+       $(call Image/Build/Profile/EX2700,$(1))
        $(call Image/Build/Profile/MT7620a,$(1))
        $(call Image/Build/Profile/MT7620a_MT7610e,$(1))
        $(call Image/Build/Profile/MT7620a_MT7530,$(1))
@@ -1010,6 +1012,7 @@ endef
 
 define Device/wsr-600
   DTS := WSR-600
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
 define Device/re6500
@@ -1019,6 +1022,7 @@ endef
 define Device/wsr-1166
   DTS := WSR-1166
   IMAGE/sysupgrade.bin := trx | pad-rootfs
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
 endef
 
 define Device/dir-860l-b1
@@ -1032,8 +1036,8 @@ define Device/dir-860l-b1
   IMAGE/factory.bin := \
        append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
        seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-       check-size $$$$(IMAGE_SIZE) | \
-       seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb"
+       seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
+       check-size $$$$(IMAGE_SIZE)
 endef
 
 define Device/firewrt