VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
-fs_squash:=squashfs-only
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
- fs_squash:=initramfs
- VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
- UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
-endif
-
-ifeq ($(CONFIG_RALINK_RT288X),y)
-define kernel_entry
--a 0x88000000 -e 0x88000000
-endef
-else
-define kernel_entry
--a 0x80000000 -e 0x80000000
-endef
-endif
-
-define mkcmdline
-board=$(1) console=$(2),$(3)
-endef
-
-define CompressLzma
- $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
-endef
-
-define PatchKernelLzma
- cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
- $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
-endef
-
-define MkImage
- mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
- -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(2) $(3)
-endef
-
-define MkImageLzma
- $(call PatchKernelLzma,$(1),$(2))
- $(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage)
-endef
-
-define CatFiles
- if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
- echo "Warning: $(1) is too big"; \
- else if [ `stat -c%s $(3)` -gt $(4) ]; then \
- echo "Warning: $(3) is too big"; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- fi; fi
-endef
-
-define Sysupgrade/KRuImage
- $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)))
-endef
-
-define mkmtd
-mtdparts=$(1):$(2)
-endef
-define mkmtd/phys
-$(call mkmtd,physmap-flash.0,$(1))
-endef
-
-define mkmtd/spi
-$(call mkmtd,spi0.0,$(1))
-endef
-
-define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
- cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
- $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
- $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
- cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
- $(call Image/Build/Initramfs)
-endef
-
-define BuildFirmware/Generic
- $(call MkImageLzma,$(2),$(3))
- $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
-endef
-
-define BuildFirmware/Generic/initramfs
- $(call MkImageLzma,$(2),$(3))
- $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
-endef
-
-mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-define BuildFirmware/GENERIC_4M
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
-endef
-
-define BuildFirmware/GENERIC_4M/initramfs
- $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)))
-endef
-
-mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
-kernel_size_8M=917504
-rootfs_size_8M=7143424
-define BuildFirmware/GENERIC_8M
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M))
-endef
-
-define BuildFirmware/GENERIC_8M/initramfs
- $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
+define Image/Build/Initramfs
+ $(call Image/Build/Profile/$(PROFILE),initramfs)
endef
-mtdlayout_edimax_3g6200n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2752k(rootfs),128k@0x3e0000(cimage)ro,3648k@0x50000(firmware)
-define BuildFirmware/3G6200N
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_edimax_3g6200n)),917504,2818048)
-endef
+DEVICE_VARS += DTS IMAGE_SIZE
-mtdlayout_allnet_all5002=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),31424k(rootfs),32448k@0x50000(firmware)
-define BuildFirmware/ALL5002
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002)),1048576,32178176)
-endef
+loadaddr-y := 0x80000000
+loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
+loadaddr-$(CONFIG_TARGET_ramips_mt7621) := 0x80001000
-define BuildFirmware/ALL5002/initramfs
- $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_allnet_all5002)))
-endef
+KERNEL_LOADADDR := $(loadaddr-y)
-mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
-mtd_argus_atp52b_kernel_part_size=1179648
-mtd_argus_atp52b_rootfs_part_size=6815744
-define BuildFirmware/ARGUS_ATP52B
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
+KERNEL_DTB = kernel-bin | patch-dtb | lzma
+define Device/Default
+ PROFILES = Default $$(DTS)
+ KERNEL_DEPENDS = $$(wildcard ../dts/$$(DTS).dts)
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ IMAGES := sysupgrade.bin
+ IMAGE_SIZE := $(ralink_default_fw_size_8M)
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
-define BuildFirmware/Buffalo
- $(call MkImageLzma,$(2),$(3))
- $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- buffalo-enc -p $(3) -v 1.76 \
- -i $(KDIR)/vmlinux-$(2).uImage \
- -o $(KDIR)/vmlinux-$(2).uImage.enc; \
- buffalo-enc -p $(3) -v 1.76 \
- -i $(KDIR)/root.$(1) \
- -o $(KDIR)/root.$(2).enc; \
- buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
- -l mlang8 -f 1 -r EU \
- -i $(KDIR)/vmlinux-$(2).uImage.enc \
- -i $(KDIR)/root.$(2).enc \
- -o $(call imgname,$(1),$(2))-factory-EU.bin; \
- fi
+define Build/patch-dtb
+ $(call Image/BuildDTB,../dts/$(DTS).dts,$@.dtb)
+ $(STAGING_DIR_HOST)/bin/patch-dtb $@ $@.dtb
endef
-
-define BuildFirmware/Buffalo2
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6))
+define Build/trx
+ $(STAGING_DIR_HOST)/bin/trx \
+ -o $@ \
+ -m $(IMAGE_SIZE) \
+ -f $(word 1,$^) \
+ -a 4 -f $(word 2,$^)
endef
-mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_dir300b1_kernel_part_size=917504
-mtd_dir300b1_rootfs_part_size=2949120
-define BuildFirmware/DIR300B1
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
- mkwrgimg -s $(4) -d /dev/mtdblock/2 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.bin
+define Build/relocate-kernel
+ ( \
+ dd if=$(KDIR)/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("V", @s[7])' && \
+ cat $@ \
+ ) > $@.new
+ mv $@.new $@
endef
-define BuildFirmware/DIR300B1/initramfs
- $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
+define MkCombineduImage
+ $(call PatchKernelLzma,$(2),$(3))
+ if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \
+ echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \
+ else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
+ echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
+ else \
+ ( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=`expr $(4) - 64` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.lzma.combined ; \
+ fi ; fi
+ $(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
endef
-mtdlayout_dap1350=192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,1088k(kernel),6400k(rootfs),7488k@0xb0000(firmware)
-mtd_dap1350_kernel_part_size=1114112
-mtd_dap1350_rootfs_part_size=6553600
-define BuildFirmware/DAP1350
- $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
- mkdapimg -s $(4) \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.bin
+#
+# The real magic happens inside these templates
+#
+# $(1), compression method
+# $(2), filename of image data
+# $(3), output filename
+define MkImage
+ $(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
+ -mkimage -A mips -O linux -T kernel -C $(1) -a $(loadaddr-y) -e $(loadaddr-y) \
+ -n "$(imagename)" \
+ -d $(2) $(3)
endef
-define BuildFirmware/DAP1350/initramfs
- $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,115200) $(call mkmtd/phys,$(mtdlayout_dap1350)),$(mtd_dap1350_kernel_part_size),$(mtd_dap1350_rootfs_part_size))
+define CompressLzma
+ $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
-define BuildFirmware/Edimax
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- mkedimaximg -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.bin \
- -s $(3) -m $(4) -f $(5) -S $(6); \
+define MkImageSysupgrade/squashfs
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
+ cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name)
+ $(call prepare_generic_squashfs,$(KDIR)/$(output_name))
+ if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \
+ echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
+ else \
+ $(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
fi
endef
-mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
-mtd_f5d8235_kernel_part_size=1572864
-mtd_f5d8235_rootfs_part_size=6356992
-define BuildFirmware/F5D8235
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
-endef
-
-define BuildFirmware/FONERA20N
- $(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
- $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
-endef
-
-define BuildFirmware/FONERA20N/initramfs
- $(call BuildFirmware/GENERIC_8M/initramfs,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
-endef
-
-mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware)
-kernel_size_nw718=917504
-rootfs_size_nw718=2883584
-cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718))
-define BuildFirmware/NW718
- $(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718))
- $(call PatchKernelLzma,$(2),$(cmdline_nw718))
- mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
- -n "ARA1B4NCRNW718;1" \
- -d "$(KDIR)/vmlinux-$(2).bin.lzma" \
- "$(KDIR)/vmlinux-$(2).uImage"
- $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(kernel_size_nw718),$(KDIR)/root.$(1),$(rootfs_size_nw718),$(call imgname,$(1),$(2))-factory.bin)
-endef
-
-mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_rtg32b1_kernel_part_size=917504
-mtd_rtg32b1_rootfs_part_size=2949120
-define BuildFirmware/RTG32B1
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
-endef
-
-mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
-mtd_rtn10plus_kernel_part_size=917504
-mtd_rtn10plus_rootfs_part_size=2949120
-define BuildFirmware/RTN10PLUS
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
-endef
-
-define BuildFirmware/W306R_4M
- $(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
-endef
-
-define BuildFirmware/w306r
- $(call PatchKernelLzma,$(2),$(3))
- mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\
- -n 'linkn Kernel Image' \
- -d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage
- $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin)
-endef
-
-mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
-define BuildFirmware/WHRG300N
- $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
- $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088)
- ( \
- echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
- dd bs=512 count=1 conv=sync; \
- dd if=$(call sysupname,$(1),whr-g300n); \
- ) > $(KDIR)/whr-g300n-tftp.tmp
- buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
- -o $(call imgname,$(1),whr-g300n)-tftp.bin
-endef
-
-mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
-kernel_size_wl341v3=917504
-rootfs_size_wl341v3=2949120
-define BuildFirmware/WL341V3
- $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+# $(1), lowercase board name like "mt7620a_v22sg"
+# $(2), DTS filename without .dts extension
+# $(3), optional filename suffix, e.g. "-initramfs"
+define PatchKernelLzmaDtb
+ cp $(KDIR)/vmlinux$(3) $(KDIR)/vmlinux-$(1)$(3)
+ $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts
+ $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1)$(3) $(KDIR)/$(2).dtb
+ $(call CompressLzma,$(KDIR)/vmlinux-$(1)$(3),$(KDIR)/vmlinux-$(1)$(3).bin.lzma)
+endef
+
+# $(1), lowercase board name
+# $(2), DTS filename without .dts extension
+# $(3), ih_name field of uImage header
+# $(4), optional filename suffix, e.g. "-initramfs"
+define MkImageLzmaDtb
+ $(call PatchKernelLzmaDtb,$(1),$(2),$(4))
+ $(call MkImage,lzma,$(KDIR)/vmlinux-$(1)$(4).bin.lzma,$(KDIR)/vmlinux-$(1)$(4).uImage,$(3))
+endef
+
+# $(1), Rootfs type, e.g. squashfs
+# $(2), lowercase board name
+# $(3), DTS filename without .dts extension
+# $(4), maximum size of sysupgrade image
+# $(5), uImage header's ih_name field
+define BuildFirmware/OF
+ $(call MkImageLzmaDtb,$(2),$(3),$(5))
+ $(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6))
+endef
+
+# $(1), squashfs/initramfs
+# $(2), lowercase board name
+# $(3), DTS filename without .dts extension
+# $(4), ih_name field of uImage header
+define BuildFirmware/OF/initramfs
+ $(call MkImageLzmaDtb,$(2),$(3),$(4),-initramfs)
+ $(CP) $(KDIR)/vmlinux-$(2)-initramfs.uImage $(call imgname,$(1),$(2))-uImage.bin
+endef
+
+# Build images for default ralink layout for 4MB flash
+# kernel + roots = 0x3b0000
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+ralink_default_fw_size_4M=3866624
+BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M),$(4))
+BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+
+# Build images for default ralink layout for 8MB flash
+# kernel + roots = 0x7b0000
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+# $(4) = uImage header name field
+ralink_default_fw_size_8M=8060928
+BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4))
+BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+
+ralink_default_fw_size_16M=16121856
+BuildFirmware/Default16M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_16M),$(4))
+BuildFirmware/Default16M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+
+ralink_default_fw_size_32M=33226752
+BuildFirmware/Default32M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_32M),$(4))
+BuildFirmware/Default32M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
+
+# Build images for a custom sized flash layout
+# $(1) = squashfs/initramfs
+# $(2) = lowercase board name
+# $(3) = dts file
+# $(4) = kernel + rootfs size
+BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6))
+BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# Some boards need a special header inside the uImage to make them bootable
+define BuildFirmware/CustomFlashFactory/squashfs
+ $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4))
+ $(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6))
+endef
+BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+
+# wrappers for boards that have 4MB and 8MB versions
+define BuildFirmware/DefaultDualSize/squashfs
+ $(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M)
+ $(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M)
+endef
+define BuildFirmware/DefaultDualSize/initramfs
+ $(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M)
+ $(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
+endef
+
+# build Seama header images
+define BuildFirmware/Seama/squashfs
+ $(call MkImageLzmaDtb,$(2),$(3),$(5))
+ $(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin)
+ cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
+ if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $$$$(($(5) - 64)) ]; then \
+ echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
+ else \
+ dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
( \
- dd if=/dev/zero bs=195936 count=1; \
- echo "1.01"; \
- dd if=/dev/zero bs=581 count=1; \
- echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
- dd if=/dev/zero bs=65552 count=1; \
- dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
+ dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
- dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
- echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
- ) > $(call imgname,$(1),$(2))-factory.bin; \
+ ) > $(KDIR)/vmlinux-$(2).tmp; \
+ $(STAGING_DIR_HOST)/bin/seama \
+ -i $(KDIR)/vmlinux-$(2).tmp \
+ -m "dev=/dev/mtdblock/2" -m "type=firmware"; \
+ $(STAGING_DIR_HOST)/bin/seama \
+ -s $(call imgname,$(1),$(2))-factory.bin \
+ -m "signature=$(4)" \
+ -i $(KDIR)/vmlinux-$(2).tmp.seama; \
+ dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \
+ $(STAGING_DIR_HOST)/bin/seama \
+ -i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \
+ -m "dev=/dev/mtdblock/2" -m "type=firmware"; \
+ ( \
+ dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \
+ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
+ ) > $(BIN_DIR)/$(output_name); \
fi
endef
+BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
-mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware)
-define BuildFirmware/WLITX4AG300N
- $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584)
-endef
-
-#
-# Templates
-#
-define Image/Build/Template/initramfs/initramfs
- $(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
-endef
-
-define Image/Build/Template/squashfs-only/squashfs
- $(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
-endef
-
-#
-# RT288X Profiles
-#
-define Image/Build/Profile/F5D8235V1
- $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1)
-endef
-
-define Image/Build/Profile/RTN15
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/V11STFE
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys)
+define BuildFirmware/PorayDualSize/squashfs
+ $(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3))
+ if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \
+ mkporayfw -B $(3) -F 4M \
+ -f $(call sysupname,$(1),$(2)-4M) \
+ -o $(call imgname,$(1),$(2)-4M)-factory.bin; \
+ fi
+ if [ -e "$(call sysupname,$(1),$(2)-8M)" ]; then \
+ mkporayfw -B $(3) -F 8M \
+ -f $(call sysupname,$(1),$(2)-8M) \
+ -o $(call imgname,$(1),$(2)-8M)-factory.bin; \
+ fi
endef
+BuildFirmware/PorayDualSize/initramfs=$(call BuildFirmware/DefaultDualSize/initramfs,$(1),$(2),$(3))
-define Image/Build/Profile/WLITX4AG300N
- $(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N)
-endef
-ifeq ($(CONFIG_RALINK_RT288X),y)
-define Image/Build/Profile/Default
- $(call Image/Build/Profile/F5D8235V1,$(1))
- $(call Image/Build/Profile/RTN15,$(1))
- $(call Image/Build/Profile/V11STFE,$(1))
- $(call Image/Build/Profile/WLITX4AG300N,$(1))
-endef
+ifeq ($(SUBTARGET),rt288x)
+include rt288x.mk
endif
-#
-# RT305X Profiles
-#
-define Image/Build/Profile/3G6200N
- $(call Image/Build/Template/$(fs_squash)/$(1),3G6200N,3g-6200n,3G-6200N,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/ALL0256N
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
-endef
-
-define Image/Build/Profile/ALL5002
- $(call Image/Build/Template/$(fs_squash)/$(1),ALL5002,all5002,ALL5002,ttyS1,57600,spi)
-endef
-
-define Image/Build/Profile/ARGUS_ATP52B
- $(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B)
-endef
-
-define Image/Build/Profile/BC2
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/DIR300B1
- $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
- $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
- $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
- $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
-endef
-
-define Image/Build/Profile/DAP1350
- $(call Image/Build/Template/$(fs_squash)/$(1),DAP1350,dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
-endef
-
-define Image/Build/Profile/ESR9753
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/HW5503G
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/F5D8235V2
- $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2)
-endef
-
-define Image/Build/Profile/FONERA20N
- $(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N)
-endef
-
-define Image/Build/Profile/FREESTATION5
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,freestation5,FREESTATION5,ttyS1,115200,phys)
-endef
-
-define Image/Build/Profile/MOFI35003GN
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/NBG419N
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG419N,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/NW718
- $(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718)
-endef
-
-define Image/Build/Profile/OMNIEMB
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/PSR680W
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,psr-680w,PSR-680W,ttyS1,115200,phys)
-endef
-
-define Image/Build/Profile/PWH2004
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/RTG32B1
- $(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
-endef
-
-define Image/Build/Profile/RTN10PLUS
- $(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
-endef
-
-define Image/Build/Profile/SLR7205
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/V22RW2X2
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/W306R_V20
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
- $(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/W502U
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
-endef
-
-define Image/Build/Profile/WCR150GN
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/WHRG300N
- $(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N)
-endef
-
-define Image/Build/Profile/WL_330N
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi)
-endef
-
-define Image/Build/Profile/WL_330N3G
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi)
-endef
-
-define Image/Build/Profile/WL341V3
- $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3)
-endef
-
-define Image/Build/Profile/WL351
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys)
-endef
-
-define Image/Build/Profile/WR5123GN
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys)
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
-endef
+ifeq ($(SUBTARGET),rt305x)
+include rt305x.mk
+endif
+ifeq ($(SUBTARGET),rt3883)
+include rt3883.mk
+endif
-define Image/Build/Profile/UPVEL
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,ur-336un,UR-336UN,ttyS1,57600,phys)
-endef
+ifeq ($(SUBTARGET),mt7620)
+include mt7620.mk
+endif
-define Image/Build/Profile/WR6202
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
-endef
+ifeq ($(SUBTARGET),mt7621)
+include mt7621.mk
+endif
-define Image/Build/Profile/XDXRN502J
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys)
-endef
+ifeq ($(SUBTARGET),mt7628)
+include mt7628.mk
+endif
-ifeq ($(CONFIG_RALINK_RT305X),y)
-define Image/Build/Profile/Default
- $(call Image/Build/Profile/3G6200N,$(1))
- $(call Image/Build/Profile/ALL0256N,$(1))
- $(call Image/Build/Profile/ALL5002,$(1))
- $(call Image/Build/Profile/ARGUS_ATP52B,$(1))
- $(call Image/Build/Profile/BC2,$(1))
- $(call Image/Build/Profile/DIR300B1,$(1))
- $(call Image/Build/Profile/DAP1350,$(1))
- $(call Image/Build/Profile/ESR9753,$(1))
- $(call Image/Build/Profile/F5D8235V2,$(1))
- $(call Image/Build/Profile/RTN10PLUS,$(1))
- $(call Image/Build/Profile/FONERA20N,$(1))
- $(call Image/Build/Profile/FREESTATION5,$(1))
- $(call Image/Build/Profile/HW5503G,$(1))
- $(call Image/Build/Profile/MOFI35003GN,$(1))
- $(call Image/Build/Profile/NBG419N,$(1))
- $(call Image/Build/Profile/NW718,$(1))
- $(call Image/Build/Profile/OMNIEMB,$(1))
- $(call Image/Build/Profile/PSR680W,$(1))
- $(call Image/Build/Profile/PWH2004,$(1))
- $(call Image/Build/Profile/RTG32B1,$(1))
- $(call Image/Build/Profile/SLR7205,$(1))
- $(call Image/Build/Profile/V22RW2X2,$(1))
- $(call Image/Build/Profile/W306R_V20,$(1))
- $(call Image/Build/Profile/W502U,$(1))
- $(call Image/Build/Profile/WCR150GN,$(1))
- $(call Image/Build/Profile/WHRG300N,$(1))
- $(call Image/Build/Profile/WL_330N,$(1))
- $(call Image/Build/Profile/WL_330N3G,$(1))
- $(call Image/Build/Profile/WL341V3,$(1))
- $(call Image/Build/Profile/WL351,$(1))
- $(call Image/Build/Profile/WR5123GN,$(1))
- $(call Image/Build/Profile/WR6202,$(1))
- $(call Image/Build/Profile/XDXRN502J,$(1))
-endef
+ifeq ($(SUBTARGET),mt7688)
+include mt7688.mk
endif
+
+ifndef TARGET_DEVICES
#
-# RT3662/RT3883 Profiles
+# Generic Targets - only needed for legacy image building code
#
-define Image/Build/Profile/RTN56U
- $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,rt-n56u,RT-N56U,ttyS1,57600,phys)
-endef
-
-ifeq ($(CONFIG_RALINK_RT3883),y)
-define Image/Build/Profile/Default
- $(call Image/Build/Profile/RTN56U,$(1))
-endef
-endif
-
-define Image/Build/Initramfs
- $(call Image/Build/Profile/$(PROFILE),initramfs)
+define Image/BuildKernel
+ cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
+ cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
+ $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
+ $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
+ cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
endef
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
+define Image/BuildKernel/Initramfs
+ cp $(KDIR)/vmlinux-initramfs.elf $(BIN_DIR)/$(VMLINUX)-initramfs.elf
+ cp $(KDIR)/vmlinux-initramfs $(BIN_DIR)/$(VMLINUX)-initramfs.bin
+ $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
+ $(call MkImage,lzma,$(KDIR)/vmlinux-initramfs.bin.lzma,$(KDIR)/uImage-initramfs.lzma)
+ cp $(KDIR)/uImage-initramfs.lzma $(BIN_DIR)/$(UIMAGE)-initramfs.bin
+ $(call Image/Build/Initramfs)
endef
define Image/Build
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
+endif
$(eval $(call BuildImage))
projects / openwrt.git / blobdiff