ramips: select kmod-rt2800-soc by default (if available)

[openwrt.git] / target / linux / ramips / dts / rt3883.dtsi

diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi
index 5a4c485..15c3561 100644 (file)
--- a/target/linux/ramips/dts/rt3883.dtsi
+++ b/target/linux/ramips/dts/rt3883.dtsi
@@ -48,12 +48,21 @@
                watchdog@120 {
                        compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
                        reg = <0x120 0x10>;
+
+                       resets = <&rstctrl 8>;
+                       reset-names = "wdt";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <1>;
                };
 
                intc: intc@200 {
                        compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
                        reg = <0x200 0x100>;
 
+                       resets = <&rstctrl 19>;
+                       reset-names = "intc";
+
                        interrupt-controller;
                        #interrupt-cells = <1>;
 
@@ -64,21 +73,47 @@
                memc@300 {
                        compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
                        reg = <0x300 0x100>;
+
+                       resets = <&rstctrl 20>;
+                       reset-names = "mc";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <3>;
+               };
+
+               uart@500 {
+                       compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+                       reg = <0x500 0x100>;
+
+                       resets = <&rstctrl 12>;
+                       reset-names = "uart";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <5>;
+
+                       reg-shift = <2>;
+
+                       status = "disabled";
                };
 
                gpio0: gpio@600 {
                        compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
                        reg = <0x600 0x34>;
 
+                       resets = <&rstctrl 13>;
+                       reset-names = "pio";
+
+                       interrupt-parent = <&intc>;
+                       interrupts = <6>;
+
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <0>;
                        ralink,num-gpios = <24>;
                        ralink,register-map = [ 00 04 08 0c
                                                20 24 28 2c
                                                30 34 ];
-
-                       status = "disabled";
                };
 
                gpio1: gpio@638 {
@@ -88,6 +123,7 @@
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <24>;
                        ralink,num-gpios = <16>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
@@ -103,6 +139,7 @@
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <40>;
                        ralink,num-gpios = <32>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
@@ -118,6 +155,7 @@
                        gpio-controller;
                        #gpio-cells = <2>;
 
+                       ralink,gpio-base = <72>;
                        ralink,num-gpios = <24>;
                        ralink,register-map = [ 00 04 08 0c
                                                10 14 18 1c
@@ -132,6 +170,12 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
 
+                       resets = <&rstctrl 18>;
+                       reset-names = "spi";
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&spi_pins>;
+
                        status = "disabled";
                };
 
@@ -139,10 +183,39 @@
                        compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
                        reg = <0xc00 0x100>;
 
+                       resets = <&rstctrl 19>;
+                       reset-names = "uartl";
+
                        interrupt-parent = <&intc>;
                        interrupts = <12>;
 
                        reg-shift = <2>;
+
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uartlite_pins>;
+               };
+       };
+
+       pinctrl {
+               compatible = "ralink,rt2880-pinmux";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&state_default>;
+               state_default: pinctrl0 {
+               };
+
+               spi_pins: spi {
+                       spi {
+                               ralink,group = "spi";
+                               ralink,function = "spi";
+                       };
+               };
+
+               uartlite_pins: uartlite {
+                       uart {
+                               ralink,group = "uartlite";
+                               ralink,function = "uartlite";
+                       };
                };
        };
 
@@ -153,7 +226,115 @@
                interrupt-parent = <&cpuintc>;
                interrupts = <5>;
 
+               port@0 {
+                       compatible = "ralink,rt3883-port", "ralink,eth-port";
+                       reg = <0>;
+               };
+
+               mdio-bus {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       status = "disabled";
+               };
+       };
+
+       rstctrl: rstctrl {
+               compatible = "ralink,rt3883-reset", "ralink,rt2880-reset";
+               #reset-cells = <1>;
+       };
+
+       pci@10140000 {
+               compatible = "ralink,rt3883-pci";
+               reg = <0x10140000 0x20000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges; /* direct mapping */
+
                status = "disabled";
+
+               pciintc: interrupt-controller {
+                       interrupt-controller;
+                       #address-cells = <0>;
+                       #interrupt-cells = <1>;
+
+                       interrupt-parent = <&cpuintc>;
+                       interrupts = <4>;
+               };
+
+               host-bridge {
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       #interrupt-cells = <1>;
+
+                       device_type = "pci";
+
+                       bus-range = <0 255>;
+                       ranges = <
+                               0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+                               0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+                       >;
+
+                       interrupt-map-mask = <0xf800 0 0 7>;
+                       interrupt-map = <
+                               /* IDSEL 17 */
+                               0x8800 0 0 1 &pciintc 18
+                               0x8800 0 0 2 &pciintc 18
+                               0x8800 0 0 3 &pciintc 18
+                               0x8800 0 0 4 &pciintc 18
+                               /* IDSEL 18 */
+                               0x9000 0 0 1 &pciintc 19
+                               0x9000 0 0 2 &pciintc 19
+                               0x9000 0 0 3 &pciintc 19
+                               0x9000 0 0 4 &pciintc 19
+                       >;
+
+                       pci-bridge@1 {
+                               reg = <0x0800 0 0 0 0>;
+                               device_type = "pci";
+                               #interrupt-cells = <1>;
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+
+                               status = "disabled";
+
+                               ralink,pci-slot = <1>;
+
+                               interrupt-map-mask = <0x0 0 0 0>;
+                               interrupt-map = <0x0 0 0 0 &pciintc 20>;
+                       };
+
+                       pci-slot@17 {
+                               reg = <0x8800 0 0 0 0>;
+                               device_type = "pci";
+                               #interrupt-cells = <1>;
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+
+                               ralink,pci-slot = <17>;
+
+                               status = "disabled";
+                       };
+
+                       pci-slot@18 {
+                               reg = <0x9000 0 0 0 0>;
+                               device_type = "pci";
+                               #interrupt-cells = <1>;
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+
+                               ralink,pci-slot = <18>;
+
+                               status = "disabled";
+                       };
+               };
+       };
+
+       ubsphy {
+               compatible = "ralink,rt3xxx-usbphy";
+
+               resets = <&rstctrl 22 &rstctrl 25>;
+               reset-names = "host", "device";
        };
 
        wmac@10180000 {
@@ -163,13 +344,11 @@
                interrupt-parent = <&cpuintc>;
                interrupts = <6>;
 
-               ralink,eeprom = "soc_wmac.eeprom"; 
-
-               status = "disabled";
+               ralink,eeprom = "soc_wmac.eeprom";
        };
 
        ehci@101c0000 {
-               compatible = "ralink,rt3883-ehci", "ehci-platform";
+               compatible = "ralink,rt3xxx-ehci", "ehci-platform";
                reg = <0x101c0000 0x1000>;
 
                interrupt-parent = <&intc>;
@@ -179,7 +358,7 @@
        };
 
        ohci@101c1000 {
-               compatible = "ralink,rt3883-ohci", "ohci-platform";
+               compatible = "ralink,rt3xxx-ohci", "ohci-platform";
                reg = <0x101c1000 0x1000>;
 
                interrupt-parent = <&intc>;