ramips: fix UPVEL model names

[openwrt.git] / target / linux / ramips / dts / WL341V3.dts

diff --git a/target/linux/ramips/dts/WL341V3.dts b/target/linux/ramips/dts/WL341V3.dts
index 9b14190..40ce630 100644 (file)
--- a/target/linux/ramips/dts/WL341V3.dts
+++ b/target/linux/ramips/dts/WL341V3.dts
@@ -6,30 +6,9 @@
        compatible = "WL341V3", "ralink,rt3052-soc";
        model = "Sitecom WL-341 v3";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "mtdparts=1f000000.cfi:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,3776k@0x40000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -41,7 +20,7 @@
                        read-only;
                };
 
-               partition@20000 {
+               boardnvram: partition@20000 {
                        label = "board-nvram";
                        reg = <0x20000 0x10000>;
                        read-only;
@@ -59,41 +38,60 @@
                };
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&boardnvram 0xffa0>;
        };
 
        esw@10110000 {
-               status = "okay";
                ralink,portmap = <0x3e>;
        };
 
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&boardnvram 0xfd70>;
+       };
+
        gpio-leds {
                compatible = "gpio-leds";
+
                first {
                        label = "wl341v3:amber:first";
                        gpios = <&gpio0 9 1>;
                };
+
                first2 {
                        label = "wl341v3:blue:first";
                        gpios = <&gpio0 13 1>;
                };
+
                third {
                        label = "wl341v3:amber:third";
                        gpios = <&gpio0 11 1>;
                };
+
                third2 {
                        label = "wl341v3:blue:third";
                        gpios = <&gpio0 14 1>;
                };
+
                fourth {
                        label = "wl341v3:blue:fourth";
                        gpios = <&gpio0 10 1>;
                };
+
                fifth {
                        label = "wl341v3:amber:fifth";
                        gpios = <&gpio0 12 1>;
                };
+
                fifth2 {
                        label = "wl341v3:blue:fifth";
                        gpios = <&gpio0 8 1>;
@@ -105,11 +103,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 7 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 5 1>;
@@ -117,10 +117,6 @@
                };
        };
 
-       wmac@10180000 {
-               status = "okay";
-       };
-
        otg@101c0000 {
                status = "okay";
        };