ramips: fix serial baudrate for final version of ZBT-WG2626 board

[openwrt.git] / target / linux / ramips / dts / TEW-691GR.dts

diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts
index 1d61529..5bd6444 100644 (file)
--- a/target/linux/ramips/dts/TEW-691GR.dts
+++ b/target/linux/ramips/dts/TEW-691GR.dts
@@ -23,10 +23,12 @@
 
        ethernet@10100000 {
                mtd-mac-address = <&factory 0x28>;
+
                port@0 {
                        phy-handle = <&phy0>;
                        phy-mode = "rgmii";
                };
+
                mdio-bus {
                        status = "okay";
 
@@ -43,7 +45,6 @@
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
-
                bank-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
@@ -60,7 +61,7 @@
                        read-only;
                };
 
-               partition@40000 {
+               factory: partition@40000 {
                        reg = <0x00040000 0x00010000>;
                        label = "factory";
                        read-only;
@@ -77,16 +78,19 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio1 2 1>;
                        linux,code = <0x211>;
                };
+
                rfkill {
                        label = "rfkill";
                        gpios = <&gpio0 0 1>;
@@ -96,8 +100,9 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wps {
-                       label = "trendnet:green:wps";
+                       label = "tew-691gr:green:wps";
                        gpios = <&gpio0 9 1>;
                };
        };