ramips: fix serial baudrate for final version of ZBT-WG2626 board

[openwrt.git] / target / linux / ramips / dts / RT-N10-PLUS.dts

diff --git a/target/linux/ramips/dts/RT-N10-PLUS.dts b/target/linux/ramips/dts/RT-N10-PLUS.dts
index 92b4075..ecd732e 100644 (file)
--- a/target/linux/ramips/dts/RT-N10-PLUS.dts
+++ b/target/linux/ramips/dts/RT-N10-PLUS.dts
@@ -3,54 +3,58 @@
 /include/ "rt3050.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
        model = "Asus RT-N10+";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "devdata";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               devconf: partition@40000 {
+                       label = "devconf";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
+               };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&devconf 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3e>;
+               mediatek,portmap = <0x3e>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&devconf 0>;
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wps {
-                       label = "asus:green:wps";
+                       label = "rt-n10-plus:green:wps";
                        gpios = <&gpio0 14 1>;
                };
        };
@@ -60,19 +64,17 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
        };
-
-       wmac@10180000 {
-               status = "okay";
-       };
 };