ramips: fix serial baudrate for final version of ZBT-WG2626 board

[openwrt.git] / target / linux / ramips / dts / RT-G32-B1.dts

diff --git a/target/linux/ramips/dts/RT-G32-B1.dts b/target/linux/ramips/dts/RT-G32-B1.dts
index 66f5d83..5dcaf22 100644 (file)
--- a/target/linux/ramips/dts/RT-G32-B1.dts
+++ b/target/linux/ramips/dts/RT-G32-B1.dts
@@ -6,64 +6,63 @@
        compatible = "RT-G32-B1", "ralink,rt3050-soc";
        model = "Asus RT-G32 B1";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
                spi@b00 {
                        status = "okay";
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "mx25l3205d";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "mx25l3205d";
                                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
 
-               partition@30000 {
-                       label = "devdata";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
+                               partition@30000 {
+                                       label = "devdata";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
 
-               partition@40000 {
-                       label = "devconf";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
+                               devconf: partition@40000 {
+                                       label = "devconf";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x3b0000>;
+                               };
+                       };
                };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
                        };
                };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&devconf 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+               mediatek,portmap = <0x2f>;
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&devconf 0>;
        };
 
        gpio-keys-polled {
@@ -71,19 +70,17 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 1>;
                        linux,code = <0x211>;
                };
        };
-
-       wmac@10180000 {
-               status = "okay";
-       };
 };