ramips: add support for Planex MZK-EX300NP

[openwrt.git] / target / linux / ramips / dts / F7C027.dts

diff --git a/target/linux/ramips/dts/F7C027.dts b/target/linux/ramips/dts/F7C027.dts
index ea71625..7d479ad 100644 (file)
--- a/target/linux/ramips/dts/F7C027.dts
+++ b/target/linux/ramips/dts/F7C027.dts
@@ -9,10 +9,11 @@
        palmbus@10000000 {
                spi@b00 {
                        status = "okay";
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "mx25l12805d";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "mx25l12805d";
                                spi-max-frequency = <10000000>;
@@ -68,6 +69,10 @@
                };
        };
 
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
        pinctrl {
                state_default: pinctrl0 {
                        gpio {
@@ -79,38 +84,46 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                status {
-                       label = "belkin:blue:status";
+                       label = "f7c027:blue:status";
                        gpios = <&gpio0 7 1>;
                };
+
                power {
-                       label = "belkin:blue:power";
+                       label = "f7c027:blue:power";
                        gpios = <&gpio0 9 1>;
                };
+
                orange {
-                       label = "belkin:orange:status";
+                       label = "f7c027:orange:status";
                        gpios = <&gpio0 11 1>;
                };
+
                relay {
-                       label = "belkin:device:relay";
+                       label = "f7c027:device:relay";
                        gpios = <&gpio0 13 0>;
                };
        };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                top {
                        label = "top";
                        gpios = <&gpio0 10 1>;
                        linux,code = <0x198>;
                };
+
                power {
                        label = "power";
                        gpios = <&gpio0 12 1>;
                        linux,code = <0x100>;
                };
+
                sensor {
                        label = "sensor";
                        gpios = <&gpio0 14 1>;