ramips: set the wifi mac address to the same as LAN on witi

[openwrt.git] / target / linux / ramips / dts / CY-SWR1100.dts

diff --git a/target/linux/ramips/dts/CY-SWR1100.dts b/target/linux/ramips/dts/CY-SWR1100.dts
index 2e0af38..be15d9b 100644 (file)
--- a/target/linux/ramips/dts/CY-SWR1100.dts
+++ b/target/linux/ramips/dts/CY-SWR1100.dts
@@ -22,17 +22,17 @@
        };
 
        ethernet@10100000 {
-               mtd-mac-address = <&factory 0x66>;
                port@0 {
-                       ralink,fixed-link = <1000 1 1 1>;
+                       mediatek,fixed-link = <1000 1 1 1>;
+                       phy-mode = "rgmii";
                };
        };
 
        pci@10140000 {
                status = "okay";
-
                pinctrl-names = "default";
                pinctrl-0 = <&pci_pins>;
+
                pci_pins: pci {
                        pci {
                                ralink,group = "pci";
@@ -43,12 +43,20 @@
                host-bridge {
                        pci-bridge@1 {
                                status = "okay";
+
+                               wmac@0,0 {
+                                       ralink,5ghz = <0>;
+                                       compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+                                       reg = < 0x10000 0 0 0 0 >;
+                                       ralink,eeprom = "rt2x00pci_1_0.eeprom";
+                               };
                        };
                };
        };
 
        wmac@10180000 {
                status = "okay";
+               ralink,2ghz = <0>;
                ralink,mtd-eeprom = <&factory 0>;
        };
 
@@ -63,7 +71,6 @@
        nor-flash@1c000000 {
                compatible = "cfi-flash";
                reg = <0x1c000000 0x800000>;
-
                bank-width = <2>;
                #address-cells = <1>;
                #size-cells = <1>;
@@ -73,25 +80,30 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x4000>;
                        read-only;
                };
+
                factory: partition@34000 {
                        label = "factory";
                        reg = <0x34000 0x4000>;
                        read-only;
                };
+
                partition@38000 {
                        label = "nvram";
                        reg = <0x38000 0x8000>;
                        read-only;
                };
+
                partition@40000 {
                        label = "devdata";
                        reg = <0x40000 0x10000>;
                };
+
                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x7b0000>;
@@ -110,11 +122,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 6 1>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 3 1>;
@@ -124,12 +138,14 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wps {
-                       label = "samsung:blue:wps";
+                       label = "cy-swr1100:blue:wps";
                        gpios = <&gpio0 0 1>;
                };
+
                usb {
-                       label = "samsung:blue:usb";
+                       label = "cy-swr1100:blue:usb";
                        gpios = <&gpio1 1 1>;
                };
        };