ramips: fix Zbtlink ZBT-WR8305RT board name

[openwrt.git] / target / linux / ramips / dts / BC2.dts

diff --git a/target/linux/ramips/dts/BC2.dts b/target/linux/ramips/dts/BC2.dts
index fd7875f..d920b6e 100644 (file)
--- a/target/linux/ramips/dts/BC2.dts
+++ b/target/linux/ramips/dts/BC2.dts
@@ -6,32 +6,18 @@
        compatible = "BC2", "ralink,rt3052-soc";
        model = "NexAira BC2";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
-       };
-
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
-                       ralink,gpiomux = "jtag";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -63,6 +49,7 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                usb {
                        label = "bc2:blue:usb";
                        gpios = <&gpio0 20 1>;
@@ -74,6 +61,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 17 1>;
@@ -82,16 +70,15 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
                ralink,portmap = <0x2f>;
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        otg@101c0000 {