ramips: Change all '/include/' clauses to '#include' so preprocessing can be done...

[openwrt.git] / target / linux / ramips / dts / ASL26555-16M.dts

diff --git a/target/linux/ramips/dts/ASL26555-16M.dts b/target/linux/ramips/dts/ASL26555-16M.dts
index bd45bc3..3c6c667 100644 (file)
--- a/target/linux/ramips/dts/ASL26555-16M.dts
+++ b/target/linux/ramips/dts/ASL26555-16M.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "ASL26555", "ralink,rt3050-soc";
@@ -13,10 +13,11 @@
 
                spi@b00 {
                        status = "okay";
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "s25sl12801";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "s25sl12801";
                                spi-max-frequency = <10000000>;
@@ -26,30 +27,36 @@
                                        reg = <0x0 0x30000>;
                                        read-only;
                                };
+
                                partition@30000 {
                                        label = "uboot-env";
                                        reg = <0x30000 0x10000>;
                                        read-only;
                                };
-                               factory: partition@40000 {
+
+                               partition@40000 {
                                        label = "factory";
                                        reg = <0x40000 0x10000>;
                                        read-only;
                                };
+
                                partition@50000 {
                                        label = "firmware";
                                        reg = <0x50000 0xf80000>;
                                };
+
                                partition@fd0000 {
                                        label = "cert";
                                        reg = <0xfd0000 0x10000>;
                                        read-only;
                                };
+
                                partition@fe0000 {
                                        label = "langpack";
                                        reg = <0xfe0000 0x10000>;
                                        read-only;
                                };
+
                                devdata: partition@ff0000 {
                                        label = "devdata";
                                        reg = <0xff0000 0x10000>;
@@ -69,11 +76,11 @@
        };
 
        ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4004>;
+               mtd-mac-address = <&devdata 0x4004>;
        };
 
        esw@10110000 {
-               ralink,portmap = <0x1e>;
+               mediatek,portmap = <0x1e>;
        };
 
        wmac@10180000 {
@@ -89,11 +96,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 10 0>;
                        linux,code = <0x198>;
                };
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 12 0>;
@@ -103,34 +112,42 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                eth {
                        label = "asl26555:green:eth";
                        gpios = <&gpio0 0 1>;
                };
+
                wan-red {
                        label = "asl26555:red:wan";
                        gpios = <&gpio0 1 0>;
                };
+
                wan-green {
                        label = "asl26555:green:wan";
                        gpios = <&gpio0 2 0>;
                };
+
                wlan {
                        label = "asl26555:green:wlan";
                        gpios = <&gpio0 7 0>;
                };
+
                power-green {
                        label = "asl26555:green:power";
                        gpios = <&gpio0 8 0>;
                };
+
                power-red {
                        label = "asl26555:red:power";
                        gpios = <&gpio0 9 0>;
                };
+
                3g-green {
                        label = "asl26555:green:3g";
                        gpios = <&gpio0 14 1>;
                };
+
                3g-red {
                        label = "asl26555:red:3g";
                        gpios = <&gpio0 17 1>;