ramips: fix serial baudrate for final version of ZBT-WG2626 board

[openwrt.git] / target / linux / ramips / dts / ALL5002.dts

diff --git a/target/linux/ramips/dts/ALL5002.dts b/target/linux/ramips/dts/ALL5002.dts
index 82819ff..2e6a3ea 100644 (file)
--- a/target/linux/ramips/dts/ALL5002.dts
+++ b/target/linux/ramips/dts/ALL5002.dts
@@ -3,55 +3,70 @@
 /include/ "rt3352.dtsi"
 
 / {
-       #address-cells = <1>;
-       #size-cells = <1>;
        compatible = "ALL5002", "ralink,rt3352-soc";
-       model = "Allnet ALL5002/ALL5003";
-
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x10000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,32448k@0x50000(firmware)";
-       };
+       model = "Allnet ALL5002";
 
        palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,gpiomux = "i2c";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
                gpio0: gpio@600 {
                        status = "okay";
                };
 
                spi@b00 {
                        status = "okay";
+
                        m25p80@0 {
                                #address-cells = <1>;
                                #size-cells = <1>;
-                               compatible = "mx25l25635e";
+                               compatible = "jedec,spi-nor";
                                reg = <0 0>;
                                linux,modalias = "m25p80", "mx25l25635e";
                                spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x1fb0000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
                        };
                };
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x28>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3f>;
+               mediatek,portmap = <0x3f>;
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        ehci@101c0000 {
@@ -64,7 +79,6 @@
 
        i2c-gpio {
                compatible = "i2c-gpio";
-
                gpios = <&gpio0 1 0 &gpio0 2 0>;
                i2c-gpio,delay-us = <10>;
 
@@ -83,12 +97,14 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                ld1 {
-                       label = "allnet:green:ld1";
+                       label = "all5002:green:ld1";
                        gpios = <&pcf0 0 1>;
                };
+
                ld2 {
-                       label = "allnet:green:ld2";
+                       label = "all5002:green:ld2";
                        gpios = <&pcf0 1 1>;
                };
        };