ramips: Add support for 8devices Carambola dev board.

[openwrt.git] / target / linux / ramips / base-files / etc / uci-defaults / network

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 60dd716..d20b60a 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -9,6 +9,31 @@ if [ ! -x /usr/sbin/maccalc ]; then
        return
 fi
 
+ramips_setup_rt3x5x_vlans()
+{
+       if [ ! -x /sbin/swconfig ]; then
+               # legacy default
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               return
+       fi
+       local wanports=""
+       local lanports=""
+       for port in 5 4 3 2 1 0; do
+               if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
+                       continue
+               fi
+               if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
+                       wanports="$port $wanports"
+               else
+                       lanports="$port $lanports"
+               fi
+       done
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "rt305x" "1" "1"
+       ucidef_add_switch_vlan "rt305x" "1" "$lanports 6t"
+       ucidef_add_switch_vlan "rt305x" "2" "$wanports 6t"
+}
+
 ramips_setup_interfaces()
 {
        local board="$1"
@@ -16,31 +41,65 @@ ramips_setup_interfaces()
        ucidef_set_interface_loopback
 
        case $board in
+       all0256n | \
+       all5002 | \
+       dir-615-h1 | \
+       wl-330n)
+               ucidef_set_interface_lan "eth0.1"
+               ;;
+
+       3g-6200n | \
        argus-atp52b | \
        b2c | \
+       nw718 | \
+       psr-680w | \
+       sl-r7205 | \
+       w502u | \
+       wr6202)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
+
+       f5d8235-v1 | \
        f5d8235-v2 | \
-       nw718)
+       ur-336un)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
+
+       v11st-fe)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "switch0" "2" "0 5t"
                ;;
 
+       rt-n15 | \
        wl-351)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ucidef_add_switch "rtl8366rb" "1" "1"
-               ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
-               ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+               ucidef_add_switch_vlan "switch0" "2" "4 5t"
                ;;
 
-       rt-n15)
+       rt-n56u)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
-               ucidef_add_switch "rtl8366s" "1" "1"
-               ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
-               ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+               ucidef_add_switch_vlan "switch0" "2" "4 8t"
+               ;;
+
+       freestation5 | \
+       wcr-150gn)
+               ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
+               ;;
+
+       wli-tx4-ag300n)
+               ucidef_set_interface_lan "eth0"
                ;;
 
        *)
                RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
                if [ -n "${RT3X5X}" ]; then
-                       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+                       ramips_setup_rt3x5x_vlans
                else
                        ucidef_set_interfaces_lan_wan "eth0" "eth1"
                fi
@@ -55,20 +114,34 @@ ramips_setup_macs()
        local wan_mac=""
 
        case $board in
-       f5d8235-v2)
-               lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
-               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+       all0256n | \
+       all5002 | \
+       dir-615-h1)
+               lan_mac=$(ramips_get_mac_binary factory 40)
                ;;
-
+       3g-6200n | \
        argus-atp52b | \
-       b2c | \
+       bc2 | \
+       f5d8235-v1 | \
        nw718 | \
+       psr-680w | \
        rt-n15 | \
+       sl-r7205 | \
        wl-351)
                lan_mac=$(ramips_get_mac_binary factory 4)
                wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
+       w306r-v20)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 5)
+               ;;
+
+       fonera20n)
+               lan_mac=$(ramips_get_mac_binary factory 40)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
        dir-300-b1 |\
        dir-300-b2 |\
        dir-600-b1)
@@ -76,15 +149,54 @@ ramips_setup_macs()
                wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
                ;;
 
+       dir-620-a1)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               lan_mac=$(maccalc or "$lan_mac" "02:00:00:00:00:00")
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
        esr-9753 | \
-       nbg-419n)
+       ur-336un)
+               lan_mac=$(ramips_get_mac_binary devdata 16388)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       nbg-419n | \
+       wcr-150gn)
                 lan_mac=$(ramips_get_mac_binary factory 4)
                 wan_mac=$(ramips_get_mac_binary factory 40)
                ;;
+
+       f5d8235-v2)
+               lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       rt-n56u)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               wan_mac=$(ramips_get_mac_binary factory 32772)
+               ;;
+
+       all0239-3g | \
+       carambola | \
+       w502u)
+               lan_mac=$(ramips_get_mac_binary factory 40)
+               wan_mac=$(ramips_get_mac_binary factory 46)
+               ;;
+
+       wl341v3)
+               lan_mac=$(ramips_get_mac_binary board-nvram 65440)
+               wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+               ;;
+
+       wli-tx4-ag300n)
+               lan_mac=$(ramips_get_mac_binary factory 4)
+               ;;
+
        esac
 
-       [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
-       [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
+       [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+       [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 }
 
 [ -e /etc/config/network ] && exit 0