remove madwifi-old

[openwrt.git] / target / linux / package / base-files / files / brcm-2.6 / etc / init.d / S05netconfig

diff --git a/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig b/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
index f782d41..6a626f5 100755 (executable)
--- a/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
+++ b/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig
@@ -1,9 +1,10 @@
 #!/bin/sh
 [ -e /etc/config/network ] && exit 0
 
+mkdir -p /etc/config
+
 (
-       mkdir -p /etc/config
-       if [ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ]; then
+       if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
                # WGT634u
                echo boardtype=wgt634u
        else
@@ -30,7 +31,7 @@ BEGIN {
 
 END {
        # v1 hardware
-       if (nvram["boardtype"] == "bcm4710dev") {
+       if (nvram["boardtype"] == "bcm94710dev") {
                # Linksys WRT54G v1.x
                if (nvram["boardnum"] == "42") {
                        c["vlan0ports"]=""
@@ -47,8 +48,9 @@ END {
        if (nvram["boardtype"] == "wgt634u") {
                c["vlan0ports"] = "0 1 2 3 5*"
                c["vlan1ports"] = "4 5"
+               c["lan_ifnames"] = "vlan0 ath0"
        }
-       if (nvram["boardtype"] == "0x0467") {
+       if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
                c["vlan0ports"] = "0 1 2 3 5*"
                c["vlan1ports"] = "4 5"
        }
@@ -73,6 +75,7 @@ END {
        p("lan_ifname")
        p("lan_ifnames")
        print "lan_ipaddr=\"192.168.1.1\""
+       print "lan_netmask=\"255.255.255.0\""
        print "# lan_dns=\"192.168.1.1\""
        print "# lan_gateway=\"192.168.1.1\""
 
@@ -87,10 +90,10 @@ END {
        print "#   pppoe: PPP over Ethernet"
        print "#   pptp: Point-to-Point tunneling Protocol"
        print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-       print "#     and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
        print ""
        print "wan_proto=dhcp"
        p("wan_ifname")
+       print "wan_device=\"" c["wan_ifname"] "\""
        print "# wan_ipaddr=\"192.168.0.2\""
        print "# wan_netmask=\"255.255.255.0\""
        print "# wan_gateway=\"192.168.0.1\""
@@ -98,8 +101,8 @@ END {
        print ""
        print "## PPP over Ethernet and PPTP"
        print "# wan_ifname=\"ppp0\""
-       print "# pppoe_ifname=\"" c["wan_ifname"] "\""
-       print "# pptp_ifname=\"" c["wan_ifname"] "\""
+       print "# ppp_username=\"my_username\""
+       print "# ppp_passwd=\"my_password\""
        print "# pptp_server_ip=\"192.168.0.1\""
 }
 ' > /etc/config/network