ipq806x: add pcie support to ipq806x based platforms

[openwrt.git] / target / linux / ipq806x / patches-4.0 / 700-add-gmac-dts-suport.patch

diff --git a/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch b/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch
index 89ebe66..16defd1 100644 (file)
--- a/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch
+++ b/target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch
@@ -1,7 +1,7 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -18,8 +18,15 @@
-               bootargs = "console=ttyMSM0,115200 root=/dev/mtdblock12 rootfstype=squashfs,jffs2";
+@@ -22,8 +22,15 @@
+               linux,stdout-path = "serial0:115200n8";
        };
  
 +      aliases {
@@ -16,7 +16,7 @@
                        i2c4_pins: i2c4_pinmux {
                                pins = "gpio12", "gpio13";
                                function = "gsbi4";
-@@ -34,6 +41,25 @@
+@@ -54,6 +61,25 @@
                                        bias-none;
                                };
                        };
@@ -42,17 +42,17 @@
                };
  
                gsbi@16300000 {
-@@ -72,6 +98,7 @@
+@@ -92,6 +118,7 @@
                                        #size-cells = <1>;
                                        spi-max-frequency = <50000000>;
                                        reg = <0>;
 +                                      m25p,fast-read;
  
                                        partition@0 {
-                                               label = "0:SBL1";
-@@ -148,5 +175,66 @@
-               sata@29000000 {
-                       status = "ok";
+                                               label = "lowlevel_init";
+@@ -142,5 +169,66 @@
+                       pinctrl-0 = <&pcie2_pins>;
+                       pinctrl-names = "default";
                };
 +
 +              mdio0: mdio {
@@ -119,17 +119,17 @@
  };
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -3,6 +3,7 @@
- #include "skeleton.dtsi"
+@@ -4,6 +4,7 @@
  #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
  #include <dt-bindings/soc/qcom,gsbi.h>
+ #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
 +#include <dt-bindings/interrupt-controller/arm-gic.h>
  
  / {
        model = "Qualcomm IPQ8064";
-@@ -279,5 +280,42 @@
-                       #clock-cells = <1>;
-                       #reset-cells = <1>;
+@@ -415,5 +416,42 @@
+ 
+                       status = "disabled";
                };
 +
 +              nss-gmac-common {