+--- a/drivers/ssb/b43_pci_bridge.c
++++ b/drivers/ssb/b43_pci_bridge.c
+@@ -5,12 +5,13 @@
+ * because of its small size we include it in the SSB core
+ * instead of creating a standalone module.
+ *
+- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include <linux/pci.h>
++#include <linux/module.h>
+ #include <linux/ssb/ssb.h>
+
+ #include "ssb_private.h"
+@@ -28,6 +29,8 @@ static const struct pci_device_id b43_pc
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
--- a/drivers/ssb/driver_chipcommon.c
+++ b/drivers/ssb/driver_chipcommon.c
@@ -3,7 +3,7 @@
+ return 0;
+ }
+}
+--- a/drivers/ssb/driver_extif.c
++++ b/drivers/ssb/driver_extif.c
+@@ -3,7 +3,7 @@
+ * Broadcom EXTIF core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
+ * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
+ *
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -3,7 +3,7 @@
{
struct ssb_gige *dev;
u32 base, tmslow, tmshigh;
+--- a/drivers/ssb/driver_mipscore.c
++++ b/drivers/ssb/driver_mipscore.c
+@@ -3,7 +3,7 @@
+ * Broadcom MIPS core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ struct ssb_bus *bus = mcore->dev->bus;
+ u32 pll_type, n, m, rate = 0;
+
++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_cpu_clock(&bus->chipco);
++
+ if (bus->extif.dev) {
+ ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+ } else if (bus->chipco.dev) {
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -3,7 +3,7 @@
}
pc->setup_done = 1;
out:
+--- a/drivers/ssb/embedded.c
++++ b/drivers/ssb/embedded.c
+@@ -3,7 +3,7 @@
+ * Embedded systems support code
+ *
+ * Copyright 2005-2008, Broadcom Corporation
+- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
++ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -3,7 +3,7 @@
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
-@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss
+@@ -178,6 +178,18 @@ err_pci:
+ #define SPEX(_outvar, _offset, _mask, _shift) \
+ SPEX16(_outvar, _offset, _mask, _shift)
+
++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \
++ do { \
++ SPEX(_field[0], _offset + 0, _mask, _shift); \
++ SPEX(_field[1], _offset + 2, _mask, _shift); \
++ SPEX(_field[2], _offset + 4, _mask, _shift); \
++ SPEX(_field[3], _offset + 6, _mask, _shift); \
++ SPEX(_field[4], _offset + 8, _mask, _shift); \
++ SPEX(_field[5], _offset + 10, _mask, _shift); \
++ SPEX(_field[6], _offset + 12, _mask, _shift); \
++ SPEX(_field[7], _offset + 14, _mask, _shift); \
++ } while (0)
++
+
+ static inline u8 ssb_crc8(u8 crc, u8 data)
+ {
+@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss
{
int i;
u16 v;
u16 loc[3];
if (out->revision == 3) /* rev 3 moved MAC */
-@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss
+@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss
+ SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
+ SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
+ SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
+- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
+- SSB_SPROM1_BINF_CCODE_SHIFT);
++ if (out->revision == 1)
++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
++ SSB_SPROM1_BINF_CCODE_SHIFT);
+ SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
+ SSB_SPROM1_BINF_ANTA_SHIFT);
+ SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
+@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss
+ SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
+ if (out->revision >= 2)
SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
/* Extract the antenna gain values. */
- gain = r123_extract_antgain(out->revision, in,
}
/* Revs 4 5 and 8 have partially shared layout */
-@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb
+@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb
+ SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
+ SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
+ SSB_SPROM4_ETHPHY_ET1A_SHIFT);
++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
+ if (out->revision == 4) {
+- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0);
+ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0);
+ } else {
+- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0);
+@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb
}
/* Extract the antenna gain values. */
sprom_extract_r458(out, in);
-@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb
+@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
/* extract the MAC address */
for (i = 0; i < 3; i++) {
-@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_
+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
+ }
+- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
+@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_
SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
/* Extract the antenna gain values. */
SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
-+
+
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT);
+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G,
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
-
++
++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON,
++ SSB_SPROM8_LEDDC_ON_SHIFT);
++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF,
++ SSB_SPROM8_LEDDC_OFF_SHIFT);
++
++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN,
++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT);
++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN,
++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT);
++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH,
++ SSB_SPROM8_TXRXC_SWITCH_SHIFT);
++
++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0);
++
++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0);
++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0);
++
++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP,
++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT);
++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER,
++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT);
++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE,
++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT);
++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX,
++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT);
++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION,
++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT);
++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR,
++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT);
++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP,
++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT);
++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL,
++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT);
++
++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0);
++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0);
++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0);
++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0);
++
++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH,
++ SSB_SPROM8_THERMAL_TRESH_SHIFT);
++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET,
++ SSB_SPROM8_THERMAL_OFFSET_SHIFT);
++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_PHYCAL,
++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT);
++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD,
++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT);
++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS,
++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT);
sprom_extract_r458(out, in);
-@@ -662,7 +710,6 @@ static int sprom_extract(struct ssb_bus
+ /* TODO - get remaining rev 8 stuff needed */
+@@ -662,7 +787,6 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
int err;
u16 *buf;
-@@ -707,10 +754,17 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -707,10 +831,17 @@ static int ssb_pci_sprom_get(struct ssb_
if (err) {
/* All CRC attempts failed.
* Maybe there is no SPROM on the device?
err = 0;
goto out_free;
}
-@@ -728,12 +782,9 @@ out_free:
+@@ -728,12 +859,8 @@ out_free:
static void ssb_pci_get_boardinfo(struct ssb_bus *bus,
struct ssb_boardinfo *bi)
{
- &bi->rev);
+ bi->vendor = bus->host_pci->subsystem_vendor;
+ bi->type = bus->host_pci->subsystem_device;
-+ bi->rev = bus->host_pci->revision;
}
int ssb_pci_get_invariants(struct ssb_bus *bus,
{
driver->probe = ssb_pcihost_probe;
driver->remove = ssb_pcihost_remove;
+--- a/drivers/ssb/pcmcia.c
++++ b/drivers/ssb/pcmcia.c
+@@ -3,7 +3,7 @@
+ * PCMCIA-Hostbus related functions
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++ sprom->antenna_gain.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.a3 = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -2,7 +2,7 @@
if (!bus->nr_devices)
bus->nr_devices = chipid_to_nrcores(bus->chip_id);
if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+--- a/drivers/ssb/sdio.c
++++ b/drivers/ssb/sdio.c
+@@ -6,7 +6,7 @@
+ *
+ * Based on drivers/ssb/pcmcia.c
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
++ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ *
+@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
+ case SSB_SDIO_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++ sprom->antenna_gain.a0 = tuple->data[1];
++ sprom->antenna_gain.a1 = tuple->data[1];
++ sprom->antenna_gain.a2 = tuple->data[1];
++ sprom->antenna_gain.a3 = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->size != 3) &&
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -2,7 +2,7 @@
u8 rssisav2g; /* 2GHz RSSI params */
u8 rssismc2g;
u8 rssismf2g;
-@@ -80,26 +91,104 @@ struct ssb_sprom {
+@@ -80,26 +91,103 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
u16 vendor;
u16 type;
- u16 rev;
-+ u8 rev;
};
-@@ -229,10 +318,9 @@ struct ssb_driver {
+@@ -229,10 +317,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -308,7 +396,7 @@ struct ssb_bus {
+@@ -308,7 +395,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -404,7 +492,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -404,7 +491,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -518,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -518,6 +607,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
#define SSB_CHIPCO_UART0_DATA 0x0300
#define SSB_CHIPCO_UART0_IMR 0x0304
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -2,6 +2,7 @@
+ #define LINUX_SSB_DRIVER_GIGE_H_
+
+ #include <linux/ssb/ssb.h>
++#include <linux/bug.h>
+ #include <linux/pci.h>
+ #include <linux/spinlock.h>
+
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -97,7 +97,7 @@
#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */
#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */
#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */
-@@ -432,6 +432,56 @@
+@@ -228,6 +228,7 @@
+ #define SSB_SPROM1_AGAIN_BG_SHIFT 0
+ #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
+ #define SSB_SPROM1_AGAIN_A_SHIFT 8
++#define SSB_SPROM1_CCODE 0x0076
+
+ /* SPROM Revision 2 (inherits from rev 1) */
+ #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */
+@@ -267,6 +268,7 @@
+ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
+ /* SPROM Revision 4 */
++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */
+ #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */
+ #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */
+ #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */
+@@ -389,6 +391,11 @@
+ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
+ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
+ #define SSB_SPROM8_GPIOB_P3_SHIFT 8
++#define SSB_SPROM8_LEDDC 0x009A
++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */
++#define SSB_SPROM8_LEDDC_ON_SHIFT 8
++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */
++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0
+ #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/
+ #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+ #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
+@@ -404,6 +411,13 @@
+ #define SSB_SPROM8_AGAIN2_SHIFT 0
+ #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
+ #define SSB_SPROM8_AGAIN3_SHIFT 8
++#define SSB_SPROM8_TXRXC 0x00A2
++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f
++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0
++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0
++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4
++#define SSB_SPROM8_TXRXC_SWITCH 0xff00
++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8
+ #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */
+ #define SSB_SPROM8_RSSISMF2G 0x000F
+ #define SSB_SPROM8_RSSISMC2G 0x00F0
+@@ -430,8 +444,87 @@
+ #define SSB_SPROM8_TRI5GH_SHIFT 8
+ #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */
#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
++#define SSB_SPROM8_RXPO2G_SHIFT 0
#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
#define SSB_SPROM8_RXPO5G_SHIFT 8
+#define SSB_SPROM8_FEM2G 0x00AE
+#define SSB_SROM8_FEM_ANTSWLUT 0xF800
+#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11
+#define SSB_SPROM8_THERMAL 0x00B2
-+#define SSB_SPROM8_MPWR_RAWTS 0x00B4
-+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6
-+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8
-+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA
++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff
++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0
++#define SSB_SPROM8_THERMAL_TRESH 0xff00
++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8
++/* Temp sense related entries */
++#define SSB_SPROM8_RAWTS 0x00B4
++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff
++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0
++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00
++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9
++#define SSB_SPROM8_OPT_CORRX 0x00B6
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff
++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00
++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300
++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8
++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */
++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f
++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010
++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020
++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5
++#define SSB_SPROM8_TEMPDELTA 0x00BA
++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff
++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0
++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00
++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000
++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12
+
+/* There are 4 blocks with power info sharing the same layout */
+#define SSB_SROM8_PWR_INFO_CORE0 0x00C0
#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */
#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-@@ -456,12 +506,53 @@
+@@ -456,12 +549,63 @@
#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */
#define SSB_SPROM8_PA1HIB1 0x00DA
#define SSB_SPROM8_PA1HIB2 0x00DC
#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */
#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_2G_MCSPO 0x0152
++#define SSB_SPROM8_5G_MCSPO 0x0162
++#define SSB_SPROM8_5GL_MCSPO 0x0172
++#define SSB_SPROM8_5GH_MCSPO 0x0182
++
++#define SSB_SPROM8_CDDPO 0x0192
++#define SSB_SPROM8_STBCPO 0x0194
++#define SSB_SPROM8_BW40PO 0x0196
++#define SSB_SPROM8_BWDUPPO 0x0198
++
+/* Values for boardflags_lo read from SPROM */
+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */
+#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
SSB_SPROM1CCODE_WORLD = 0,
---- a/drivers/ssb/b43_pci_bridge.c
-+++ b/drivers/ssb/b43_pci_bridge.c
-@@ -5,12 +5,13 @@
- * because of its small size we include it in the SSB core
- * instead of creating a standalone module.
- *
-- * Copyright 2007 Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007 Michael Buesch <m@bues.ch>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- #include <linux/pci.h>
-+#include <linux/module.h>
- #include <linux/ssb/ssb.h>
-
- #include "ssb_private.h"
---- a/drivers/ssb/driver_extif.c
-+++ b/drivers/ssb/driver_extif.c
-@@ -3,7 +3,7 @@
- * Broadcom EXTIF core driver
- *
- * Copyright 2005, Broadcom Corporation
-- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
- * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
- * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
- *
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -3,7 +3,7 @@
- * Broadcom MIPS core driver
- *
- * Copyright 2005, Broadcom Corporation
-- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
- struct ssb_bus *bus = mcore->dev->bus;
- u32 pll_type, n, m, rate = 0;
-
-+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
-+ return ssb_pmu_get_cpu_clock(&bus->chipco);
-+
- if (bus->extif.dev) {
- ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
- } else if (bus->chipco.dev) {
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -3,7 +3,7 @@
- * Embedded systems support code
- *
- * Copyright 2005-2008, Broadcom Corporation
-- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2006-2008, Michael Buesch <m@bues.ch>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
---- a/drivers/ssb/pcmcia.c
-+++ b/drivers/ssb/pcmcia.c
-@@ -3,7 +3,7 @@
- * PCMCIA-Hostbus related functions
- *
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
-- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
- case SSB_PCMCIA_CIS_ANTGAIN:
- GOTO_ERROR_ON(tuple->TupleDataLen != 2,
- "antg tpl size");
-- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
-- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
-+ sprom->antenna_gain.a0 = tuple->TupleData[1];
-+ sprom->antenna_gain.a1 = tuple->TupleData[1];
-+ sprom->antenna_gain.a2 = tuple->TupleData[1];
-+ sprom->antenna_gain.a3 = tuple->TupleData[1];
- break;
- case SSB_PCMCIA_CIS_BFLAGS:
- GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
---- a/drivers/ssb/sdio.c
-+++ b/drivers/ssb/sdio.c
-@@ -6,7 +6,7 @@
- *
- * Based on drivers/ssb/pcmcia.c
- * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
-- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007-2008 Michael Buesch <m@bues.ch>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- *
-@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
- case SSB_SDIO_CIS_ANTGAIN:
- GOTO_ERROR_ON(tuple->size != 2,
- "antg tpl size");
-- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
-- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
-- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
-- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
-- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
-- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
-- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
-- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
-+ sprom->antenna_gain.a0 = tuple->data[1];
-+ sprom->antenna_gain.a1 = tuple->data[1];
-+ sprom->antenna_gain.a2 = tuple->data[1];
-+ sprom->antenna_gain.a3 = tuple->data[1];
- break;
- case SSB_SDIO_CIS_BFLAGS:
- GOTO_ERROR_ON((tuple->size != 3) &&
---- a/include/linux/ssb/ssb_driver_gige.h
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -2,6 +2,7 @@
- #define LINUX_SSB_DRIVER_GIGE_H_
-
- #include <linux/ssb/ssb.h>
-+#include <linux/bug.h>
- #include <linux/pci.h>
- #include <linux/spinlock.h>
-
projects / openwrt.git / blobdiff