ar71xx: Add WeIO Board Support

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-rb95x.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
index 8213c47..c2261ab 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
@@ -36,6 +36,7 @@
 #include "dev-wmac.h"
 #include "machtypes.h"
 #include "routerboot.h"
+#include "dev-leds-gpio.h"
 
 #define RB95X_GPIO_NAND_NCE    14
 
@@ -58,6 +59,38 @@ static struct mtd_partition rb95x_nand_partitions[] = {
        },
 };
 
+static struct gpio_led rb951ui_leds_gpio[] __initdata = {
+       {
+               .name           = "rb:green:wlan",
+               .gpio           = 11,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:act",
+               .gpio           = 3,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:port1",
+               .gpio           = 13,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:port2",
+               .gpio           = 12,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:port3",
+               .gpio           = 4,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:port4",
+               .gpio           = 21,
+               .active_low     = 1,
+       }, {
+               .name           = "rb:green:port5",
+               .gpio           = 16,
+               .active_low     = 1,
+       }
+};
+
 static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
        .mode = AR8327_PAD_MAC_RGMII,
        .txclk_delay_en = true,
@@ -151,12 +184,20 @@ static int __init rb95x_setup(void)
 {
        const struct rb_info *info;
 
-       info = rb_init_info((void *)(KSEG1ADDR(0x1f00000)), 0x10000);
+       info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
        if (!info)
                return -EINVAL;
 
        rb95x_nand_init();
 
+       return 0;
+}
+
+static void __init rb951g_setup(void)
+{
+       if (rb95x_setup())
+               return;
+
        ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
                                   AR934X_ETH_CFG_SW_ONLY_MODE);
 
@@ -171,17 +212,47 @@ static int __init rb95x_setup(void)
 
        ath79_register_eth(0);
 
-       return 0;
+       rb95x_wlan_init();
+       ath79_register_usb();
 }
 
-static void __init rb951g_setup(void)
+MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
+            rb951g_setup);
+
+static void __init rb951ui_setup(void)
 {
        if (rb95x_setup())
                return;
 
+       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+       ath79_register_mdio(1, 0x0);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+       ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+       ath79_switch_data.phy4_mii_en = 1;
+       ath79_switch_data.phy_poll_mask = BIT(4);
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+       ath79_eth0_data.phy_mask = BIT(4);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+       ath79_register_eth(0);
+
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+       ath79_register_eth(1);
+
+       gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+                        "USB power");
+
+       gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+                        "POE power");
+
        rb95x_wlan_init();
        ath79_register_usb();
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
+                                rb951ui_leds_gpio);
 }
 
-MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
-            rb951g_setup);
+MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
+            rb951ui_setup);