#include <linux/gpio.h>
#include <linux/platform_data/gpio-latch.h>
#include <linux/platform_data/rb91x_nand.h>
+#include <linux/platform_data/phy-at803x.h>
#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
#include "dev-nfc.h"
#include "dev-usb.h"
+#include "dev-spi.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define RB91X_LATCH_GPIO_BASE AR934X_GPIO_COUNT
#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x))
+#define RB91X_SSR_GPIO_BASE (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
+#define RB91X_SSR_GPIO(_x) (RB91X_SSR_GPIO_BASE + (_x))
+
+#define RB91X_SSR_BIT_LED1 0
+#define RB91X_SSR_BIT_LED2 1
+#define RB91X_SSR_BIT_LED3 2
+#define RB91X_SSR_BIT_LED4 3
+#define RB91X_SSR_BIT_LED5 4
+#define RB91X_SSR_BIT_5 5
+#define RB91X_SSR_BIT_USB_POWER 6
+#define RB91X_SSR_BIT_PCIE_POWER 7
+
+#define RB91X_GPIO_SSR_STROBE RB91X_LATCH_GPIO(0)
+#define RB91X_GPIO_LED_POWER RB91X_LATCH_GPIO(1)
+#define RB91X_GPIO_LED_USER RB91X_LATCH_GPIO(2)
#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3)
#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4)
#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11)
#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14)
#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15)
+#define RB91X_GPIO_LED_1 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1)
+#define RB91X_GPIO_LED_2 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2)
+#define RB91X_GPIO_LED_3 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3)
+#define RB91X_GPIO_LED_4 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4)
+#define RB91X_GPIO_LED_5 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5)
+#define RB91X_GPIO_USB_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER)
+#define RB91X_GPIO_PCIE_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER)
+
struct rb_board_info {
const char *name;
u32 flags;
.gpio_nle = RB91X_GPIO_NLE,
};
+static u8 rb711gr100_ssr_initdata[] __initdata = {
+ BIT(RB91X_SSR_BIT_PCIE_POWER) |
+ BIT(RB91X_SSR_BIT_USB_POWER) |
+ BIT(RB91X_SSR_BIT_5)
+};
+
+static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
+ .base = RB91X_SSR_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
+ .init_data = rb711gr100_ssr_initdata,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi0_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+ .is_flash = true,
+};
+
+static struct ath79_spi_controller_data rb711gr100_spi1_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_GPIO,
+ .cs_line = RB91X_GPIO_SSR_STROBE,
+};
+
+static struct spi_board_info rb711gr100_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rb711gr100_spi_flash_data,
+ .controller_data = &rb711gr100_spi0_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &rb711gr100_ssr_data,
+ .controller_data = &rb711gr100_spi1_cdata
+ }
+};
+
+static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
+ .bus_num = 0,
+ .num_chipselect = 2,
+};
+
+static struct gpio_led rb711gr100_leds[] __initdata = {
+ {
+ .name = "rb:green:led1",
+ .gpio = RB91X_GPIO_LED_1,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led2",
+ .gpio = RB91X_GPIO_LED_2,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led3",
+ .gpio = RB91X_GPIO_LED_3,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led4",
+ .gpio = RB91X_GPIO_LED_4,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:led5",
+ .gpio = RB91X_GPIO_LED_5,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:user",
+ .gpio = RB91X_GPIO_LED_USER,
+ .active_low = 0,
+ },
+ {
+ .name = "rb:green:power",
+ .gpio = RB91X_GPIO_LED_POWER,
+ .active_low = 0,
+ },
+};
+
+static struct at803x_platform_data rb91x_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info rb91x_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb91x_at803x_data,
+ },
+};
+
static void __init rb711gr100_init_partitions(const struct rb_info *info)
{
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
mips_set_machine_name(buf);
rb711gr100_init_partitions(info);
- ath79_register_m25p80(&rb711gr100_spi_flash_data);
+ ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
+ ARRAY_SIZE(rb711gr100_spi_info));
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(rb91x_mdio0_info,
+ ARRAY_SIZE(rb91x_mdio0_info));
+
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
&rb711gr100_gpio_latch_data,
sizeof(rb711gr100_gpio_latch_data));
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds),
+ rb711gr100_leds);
+
flags = rb711gr100_get_flags(info);
if (flags & RB91X_FLAG_USB)
projects / openwrt.git / blobdiff