ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)

[openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-rb91x.c

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
index 75382be..9ef5c44 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
@@ -24,6 +24,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_data/gpio-latch.h>
 #include <linux/platform_data/rb91x_nand.h>
+#include <linux/platform_data/phy-at803x.h>
 
 #include <asm/prom.h>
 #include <asm/mach-ath79/ath79.h>
@@ -223,6 +224,20 @@ static struct gpio_led rb711gr100_leds[] __initdata = {
        },
 };
 
+static struct at803x_platform_data rb91x_at803x_data = {
+       .disable_smarteee = 1,
+       .enable_rgmii_rx_delay = 1,
+       .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info rb91x_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &rb91x_at803x_data,
+       },
+};
+
 static void __init rb711gr100_init_partitions(const struct rb_info *info)
 {
        rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
@@ -293,10 +308,14 @@ static void __init rb711gr100_setup(void)
                           ARRAY_SIZE(rb711gr100_spi_info));
 
        ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+                                  AR934X_ETH_CFG_RXD_DELAY |
                                   AR934X_ETH_CFG_SW_ONLY_MODE);
 
        ath79_register_mdio(0, 0x0);
 
+       mdiobus_register_board_info(rb91x_mdio0_info,
+                                   ARRAY_SIZE(rb91x_mdio0_info));
+
        ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
        ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
        ath79_eth0_data.phy_mask = BIT(0);