#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#include <linux/rle.h>
#include <linux/routerboot.h>
#include <linux/gpio.h>
+#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-eth.h"
#include "dev-m25p80.h"
#include "dev-nfc.h"
+#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "routerboot.h"
#define RB2011_GPIO_NAND_NCE 14
+#define RB2011_GPIO_SFP_LOS 21
#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_ROUTERBOOT_SIZE 0xb000
-#define RB_HARD_CFG_OFFSET 0xb000
+#define RB_ROUTERBOOT_MIN_SIZE 0xb000
#define RB_HARD_CFG_SIZE 0x1000
#define RB_BIOS_OFFSET 0xd000
-#define RB_BIOS_SIZE 0x2000
+#define RB_BIOS_SIZE 0x1000
#define RB_SOFT_CFG_OFFSET 0xf000
#define RB_SOFT_CFG_SIZE 0x1000
#define RB_ART_SIZE 0x10000
+#define RB2011_FLAG_SFP BIT(0)
+#define RB2011_FLAG_USB BIT(1)
+#define RB2011_FLAG_WLAN BIT(2)
+
static struct mtd_partition rb2011_spi_partitions[] = {
{
.name = "routerboot",
.offset = RB_ROUTERBOOT_OFFSET,
- .size = RB_ROUTERBOOT_SIZE,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "hard_config",
- .offset = RB_HARD_CFG_OFFSET,
.size = RB_HARD_CFG_SIZE,
.mask_flags = MTD_WRITEABLE,
}, {
.mask_flags = MTD_WRITEABLE,
}, {
.name = "soft_config",
- .offset = RB_SOFT_CFG_OFFSET,
.size = RB_SOFT_CFG_SIZE,
}
};
+static void __init rb2011_init_partitions(const struct rb_info *info)
+{
+ rb2011_spi_partitions[0].size = info->hard_cfg_offs;
+ rb2011_spi_partitions[1].offset = info->hard_cfg_offs;
+ rb2011_spi_partitions[3].offset = info->soft_cfg_offs;
+}
+
static struct mtd_partition rb2011_nand_partitions[] = {
{
.name = "booter",
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL3,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg;
+static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
+
+static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc731c731,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static const struct ar8327_led_info rb2011_ar8327_leds[] __initconst = {
+ AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
+ AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
+ AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
+ AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
+ AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
+ AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
+ AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
+ AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
+ AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
+ AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
+ AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
};
static struct ar8327_platform_data rb2011_ar8327_data = {
.pad0_cfg = &rb2011_ar8327_pad0_cfg,
- .cpuport_cfg = {
+ .port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
- }
+ },
+ .led_cfg = &rb2011_ar8327_led_cfg,
+ .num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
+ .leds = rb2011_ar8327_leds,
};
static struct mdio_board_info rb2011_mdio0_info[] = {
static void __init rb2011_wlan_init(void)
{
- u8 *hard_cfg = (u8 *) KSEG1ADDR(0x1f000000 + RB_HARD_CFG_OFFSET);
- u16 tag_len;
- u8 *tag;
char *art_buf;
u8 wlan_mac[ETH_ALEN];
- int err;
- err = routerboot_find_tag(hard_cfg, RB_HARD_CFG_SIZE, RB_ID_WLAN_DATA,
- &tag, &tag_len);
- if (err) {
- pr_err("no calibration data found\n");
+ art_buf = rb_get_wlan_data();
+ if (art_buf == NULL)
return;
- }
-
- art_buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
- if (art_buf == NULL) {
- pr_err("no memory for calibration data\n");
- return;
- }
-
- err = rle_decode((char *) tag, tag_len, art_buf, RB_ART_SIZE,
- NULL, NULL);
- if (err) {
- pr_err("unable to decode calibration data\n");
- goto free;
- }
ath79_init_mac(wlan_mac, ath79_mac_base, 11);
ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-free:
kfree(art_buf);
}
static void __init rb2011_nand_init(void)
{
+ gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+
ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
ath79_nfc_set_parts(rb2011_nand_partitions,
ARRAY_SIZE(rb2011_nand_partitions));
ath79_register_nfc();
}
-static void __init rb2011_gpio_init(void)
+static int rb2011_get_port_link(unsigned port)
{
- gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
+ if (port != 6)
+ return -EINVAL;
+
+ /* The Loss of signal line is active low */
+ return !gpio_get_value(RB2011_GPIO_SFP_LOS);
}
-static void __init rb2011_setup(void)
+static void __init rb2011_sfp_init(void)
{
- rb2011_gpio_init();
+ gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS");
+
+ rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
+
+ rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg;
+
+ rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0;
+ rb2011_ar8327_sgmii_cfg.serdes_aen = true;
+
+ rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg;
+
+ rb2011_ar8327_data.port6_cfg.force_link = 1;
+ rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000;
+ rb2011_ar8327_data.port6_cfg.duplex = 1;
+
+ rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
+}
+
+static int __init rb2011_setup(u32 flags)
+{
+ const struct rb_info *info;
+ char buf[64];
+
+ info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
+ if (!info)
+ return -ENODEV;
+
+ scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
+ (info->board_name) ? info->board_name : "");
+ mips_set_machine_name(buf);
+
+ rb2011_init_partitions(info);
ath79_register_m25p80(&rb2011_spi_flash_data);
rb2011_nand_init();
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
+
+ if (flags & RB2011_FLAG_SFP)
+ rb2011_sfp_init();
+
+ if (flags & RB2011_FLAG_WLAN)
+ rb2011_wlan_init();
+
+ if (flags & RB2011_FLAG_USB)
+ ath79_register_usb();
+
+ return 0;
+}
+
+static void __init rb2011l_setup(void)
+{
+ rb2011_setup(0);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
+
+static void __init rb2011us_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
+}
+
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
+
+static void __init rb2011r5_setup(void)
+{
+ rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
}
-MIPS_MACHINE(ATH79_MACH_RB_2011L, "2011L", "MikroTik RouterBOARD 2011L",
- rb2011_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
static void __init rb2011g_setup(void)
{
- rb2011_setup();
- rb2011_wlan_init();
+ rb2011_setup(RB2011_FLAG_SFP |
+ RB2011_FLAG_USB |
+ RB2011_FLAG_WLAN);
}
-MIPS_MACHINE(ATH79_MACH_RB_2011G, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD",
- rb2011g_setup);
+MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
projects / openwrt.git / blobdiff