prepare for the transition to linux 2.6.22 - make it possible to override the kernel...

[openwrt.git] / target / linux / ar7-2.6 / config / default

diff --git a/target/linux/ar7-2.6/config/default b/target/linux/ar7-2.6/config/default
index 1cef125..3092078 100644 (file)
--- a/target/linux/ar7-2.6/config/default
+++ b/target/linux/ar7-2.6/config/default
@@ -4,12 +4,18 @@ CONFIG_32BIT=y
 CONFIG_AR7=y
 CONFIG_AR7_GPIO=y
 CONFIG_AR7_WDT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ATM_DRIVERS=y
 # CONFIG_ATMEL is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_BCM43XX is not set
+CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOOT_ELF32=y
-CONFIG_CMDLINE="console=ttyS0,38400n8r init=/etc/preinit"
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_BT is not set
+CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2,"
 CONFIG_CPMAC=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_HAS_LLSC=y
@@ -43,28 +49,23 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_FIRMWARE_EDID=y
 CONFIG_FIXED_MII_100_FDX=y
 # CONFIG_FIXED_MII_10_FDX is not set
 CONFIG_FIXED_PHY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
 # CONFIG_HERMES is not set
 # CONFIG_HOSTAP_PCI is not set
 # CONFIG_HOSTAP_PLX is not set
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
-CONFIG_HZ=100
-CONFIG_HZ_100=y
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_48 is not set
 # CONFIG_I2C is not set
 # CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 CONFIG_IRQ_CPU=y
@@ -73,10 +74,10 @@ CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_LEDS_AR7=y
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_MACH_VR41XX is not set
-CONFIG_MINI_FO=y
 CONFIG_MIPS=y
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_BOSPORUS is not set
@@ -111,6 +112,7 @@ CONFIG_MIPS_MT_DISABLED=y
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_AR7_PARTS=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_MTD_BLOCK2MTD is not set
 CONFIG_MTD_CFI=y
@@ -140,7 +142,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
@@ -158,7 +159,9 @@ CONFIG_MTD_PHYSMAP_START=0x10000000
 # CONFIG_MTD_SLRAM is not set
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_NET_PCI is not set
+CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NETDEV_1000 is not set
 CONFIG_NODES_SHIFT=6
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
@@ -167,8 +170,9 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PCIPCWATCHDOG is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_STB810 is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_RTC is not set
@@ -192,6 +196,7 @@ CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
@@ -202,4 +207,3 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_USB is not set
-# CONFIG_YENTA is not set