#ifndef __ADM8668_H__
#define __ADM8668_H__
-#include <asm/addrspace.h>
-#include "bsp_sup.h"
-
-#define MEM_KSEG0_BASE 0x80000000
-#define MEM_KSEG1_BASE 0xA0000000
-#define MEM_SEG_MASK 0xE0000000
-#define KVA2PA(_addr) ((unsigned long)(_addr) & ~MEM_SEG_MASK)
-
-#define MIPS_KSEG0A(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
-#define MIPS_KSEG1A(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
-
-#define PA2VA(_addr) (KVA2PA(_addr) | MEM_KSEG1_BASE)
-#define PA2CACHEVA(_addr) (KVA2PA(_addr) | MEM_KSEG0_BASE)
-
-
/*======================= Physical Memory Map ============================*/
#define ADM8668_SDRAM_BASE 0
#define ADM8668_SMEM1_BASE 0x10000000
#define ADM8668_TMR_BASE 0x1E200000
#define ADM8668_UART0_BASE 0x1E400000
#define ADM8668_SMEM0_BASE 0x1FC00000
-#define ADM8668_NAND_BASE 0x1fffff00
-
-#define PCICFG_BASE 0x12200000
-#define PCIDAT_BASE 0x12400000
-
-/* for PCI bridge fixup ! */
-#define PCI_BRIDGE_MASK 0x40
-
-/* WLAN registers */
-#define WCSR0 0x00
-#define WCSR11A 0x5c
-
-#define GPIO_REG WCSR11A
-
-#define ADM8668_WLAN_REG(_reg) \
- (*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg)))))
-
-/* configuration registers */
-#define ADM8668_CR0 0x00
-#define ADM8668_CR1 0x04
-#define ADM8668_CR2 0x08
-#define ADM8668_CR3 0x0C
-#define ADM8668_CR8 0x20
-#define ADM8668_CR10 0x28
-#define ADM8668_CR11 0x2C
-#define ADM8668_CR12 0x30
-#define ADM8668_CR13 0x34
-#define ADM8668_CR14 0x38
-#define ADM8668_CR15 0x3C
-#define ADM8668_CR16 0x40
-#define ADM8668_CR17 0x44
-#define ADM8668_CR18 0x48
-#define ADM8668_CR19 0x4C
-#define ADM8668_CR20 0x50
-#define ADM8668_CR21 0x54
-#define ADM8668_CR22 0x58
-#define ADM8668_CR23 0x5C
-#define ADM8668_CR24 0x60
-#define ADM8668_CR25 0x64
-#define ADM8668_CR26 0x68
-#define ADM8668_CR27 0x6C
-#define ADM8668_CR28 0x70
-#define ADM8668_CR29 0x74
-#define ADM8668_CR30 0x78
-#define ADM8668_CR31 0x7C
-#define ADM8668_CR32 0x80
-#define ADM8668_CR33 0x84
-#define ADM8668_CR34 0x88
-#define ADM8668_CR35 0x8C
-#define ADM8668_CR36 0x90
-#define ADM8668_CR37 0x94
-#define ADM8668_CR38 0x98
-#define ADM8668_CR39 0x9C
-#define ADM8668_CR40 0xA0
-#define ADM8668_CR41 0xA4
-#define ADM8668_CR42 0xA8
-#define ADM8668_CR43 0xAC
-#define ADM8668_CR44 0xB0
-#define ADM8668_CR45 0xB4
-#define ADM8668_CR46 0xB8
-#define ADM8668_CR47 0xBC
-#define ADM8668_CR48 0xC0
-#define ADM8668_CR49 0xC4
-#define ADM8668_CR50 0xC8
-#define ADM8668_CR51 0xCC
-#define ADM8668_CR52 0xD0
-#define ADM8668_CR53 0xD4
-#define ADM8668_CR54 0xD8
-#define ADM8668_CR55 0xDC
-#define ADM8668_CR56 0xE0
-#define ADM8668_CR57 0xE4
-#define ADM8668_CR58 0xE8
-#define ADM8668_CR59 0xEC
-#define ADM8668_CR60 0xF0
-#define ADM8668_CR61 0xF4
-#define ADM8668_CR62 0xF8
-#define ADM8668_CR63 0xFC
-#define ADM8668_CR64 0x100
-#define ADM8668_CR65 0x104
-#define ADM8668_CR66 0x108
-#define ADM8668_CR67 0x10C
-#define ADM8668_CR68 0x110
-
-#define CRGPIO_REG ADM8668_CR8
-
-#define ADM8668_CONFIG_REG(_reg) \
- (*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg)))))
-#define ADM8668_MPMC_REG(_reg) \
- (*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg)))))
-
-
-/*========================== Interrupt Controller ==========================*/
-/* registers offset */
-#define IRQ_STATUS_REG 0x00 /* Read */
-#define IRQ_RAW_STATUS_REG 0x04 /* Read */
-#define IRQ_ENABLE_REG 0x08 /* Read/Write */
-#define IRQ_DISABLE_REG 0x0C /* Write */
-#define IRQ_SOFT_REG 0x10 /* Write */
-
-#define FIQ_STATUS_REG 0x100 /* Read */
-#define FIQ_RAW_STATUS_REG 0x104
-#define FIQ_ENABLE_REG 0x108
-#define FIQ_DISABLE_REG 0x10c
-
-
-/* Macro for accessing Interrupt controller register */
-#define ADM8668_INTC_REG(_reg) \
- (*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg)))))
+#define ADM8668_NAND_BASE 0x1FFFFF00
+#define ADM8668_PCICFG_BASE 0x12200000
+#define ADM8668_PCIDAT_BASE 0x12400000
/* interrupt levels */
-#define INT_LVL_SWI 1
-#define INT_LVL_COMMS_RX 2
-#define INT_LVL_COMMS_TX 3
-#define INT_LVL_TIMERINT0 4
-#define INT_LVL_TIMERINT1 5
-#define INT_LVL_UART0 6
-#define INT_LVL_LAN 7
-#define INT_LVL_WAN 8
-#define INT_LVL_WLAN 9
-#define INT_LVL_GPIO 10
-#define INT_LVL_IDE 11
-#define INT_LVL_PCI2 12
-#define INT_LVL_PCI1 13
-#define INT_LVL_PCI0 14
-#define INT_LVL_USB 15
-#define INT_LVL_MAX INT_LVL_USB
-
-#define IRQ_MASK 0xffff
-
-#define IRQ_SWI (0x1<<INT_LVL_SWI)
-#define IRQ_TIMERINT0 (0x1<<INT_LVL_TIMERINT0)
-#define IRQ_TIMERINT1 (0x1<<INT_LVL_TIMERINT1)
-#define IRQ_UART0 (0x1<<INT_LVL_UART0)
-#define IRQ_LAN (0x1<<INT_LVL_LAN)
-#define IRQ_WAN (0x1<<INT_LVL_WAN)
-#define IRQ_WLAN (0x1<<INT_LVL_WLAN)
-#define IRQ_GPIO (0x1<<INT_LVL_GPIO)
-#define IRQ_IDEINT (0x1<<INT_LVL_IDE)
-#define IRQ_PCI2 (0x1<<INT_LVL_PCI2)
-#define IRQ_PCI1 (0x1<<INT_LVL_PCI1)
-#define IRQ_PCI0 (0x1<<INT_LVL_PCI0)
-#define IRQ_USB (0x1<<INT_LVL_USB)
-
-
-/*=========================== UART Control Register ========================*/
-#define UART_DR_REG 0x00
-#define UART_RSR_REG 0x04
-#define UART_ECR_REG 0x04
-#define UART_LCR_H_REG 0x08
-#define UART_LCR_M_REG 0x0c
-#define UART_LCR_L_REG 0x10
-#define UART_CR_REG 0x14
-#define UART_FR_REG 0x18
-#define UART_IIR_REG 0x1c
-#define UART_ICR_REG 0x1C
-#define UART_ILPR_REG 0x20
-
-/* rsr/ecr reg */
-#define UART_OVERRUN_ERR 0x08
-#define UART_BREAK_ERR 0x04
-#define UART_PARITY_ERR 0x02
-#define UART_FRAMING_ERR 0x01
-#define UART_RX_STATUS_MASK 0x0f
-#define UART_RX_ERROR ( UART_BREAK_ERR \
- | UART_PARITY_ERR \
- | UART_FRAMING_ERR)
-
-/* lcr_h reg */
-#define UART_SEND_BREAK 0x01
-#define UART_PARITY_EN 0x02
-#define UART_EVEN_PARITY 0x04
-#define UART_TWO_STOP_BITS 0x08
-#define UART_ENABLE_FIFO 0x10
-
-#define UART_WLEN_5BITS 0x00
-#define UART_WLEN_6BITS 0x20
-#define UART_WLEN_7BITS 0x40
-#define UART_WLEN_8BITS 0x60
-#define UART_WLEN_MASK 0x60
-
-/* cr reg */
-#define UART_PORT_EN 0x01
-#define UART_SIREN 0x02
-#define UART_SIRLP 0x04
-#define UART_MODEM_STATUS_INT_EN 0x08
-#define UART_RX_INT_EN 0x10
-#define UART_TX_INT_EN 0x20
-#define UART_RX_TIMEOUT_INT_EN 0x40
-#define UART_LOOPBACK_EN 0x80
-
-/* fr reg */
-#define UART_CTS 0x01
-#define UART_DSR 0x02
-#define UART_DCD 0x04
-#define UART_BUSY 0x08
-#define UART_RX_FIFO_EMPTY 0x10
-#define UART_TX_FIFO_FULL 0x20
-#define UART_RX_FIFO_FULL 0x40
-#define UART_TX_FIFO_EMPTY 0x80
-
-/* iir/icr reg */
-#define UART_MODEM_STATUS_INT 0x01
-#define UART_RX_INT 0x02
-#define UART_TX_INT 0x04
-#define UART_RX_TIMEOUT_INT 0x08
-
-#define UART_INT_MASK 0x0f
-
-#ifdef _FPGA_
-#define ADM8668_UARTCLK_FREQ 3686400
-#else
-#define ADM8668_UARTCLK_FREQ 62500000
-#endif
-
-#define UART_BAUDDIV(_rate) \
- ((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1))
-
-/* uart_baudrate */
-#define UART_230400bps_DIVISOR UART_BAUDDIV(230400)
-#define UART_115200bps_DIVISOR UART_BAUDDIV(115200)
-#define UART_76800bps_DIVISOR UART_BAUDDIV(76800)
-#define UART_57600bps_DIVISOR UART_BAUDDIV(57600)
-#define UART_38400bps_DIVISOR UART_BAUDDIV(38400)
-#define UART_19200bps_DIVISOR UART_BAUDDIV(19200)
-#define UART_14400bps_DIVISOR UART_BAUDDIV(14400)
-#define UART_9600bps_DIVISOR UART_BAUDDIV(9600)
-#define UART_2400bps_DIVISOR UART_BAUDDIV(2400)
-#define UART_1200bps_DIVISOR UART_BAUDDIV(1200)
-
-
-/*=========================== Counter Timer ==============================*/
-#define TIMER0_REG_BASE ADM8668_TMR_BASE
-#define TIMER1_REG_BASE ADM8668_TMR_BASE+0x20
-
-#define TIMER_LOAD_REG 0x00
-#define TIMER_VALUE_REG 0x04
-#define TIMER_CTRL_REG 0x08
-#define TIMER_CLR_REG 0x0c
-
-/* TIMER_LOAD_REG */
-#ifdef _FPGA_
-#define SYS_CLOCK 56000000
-#else
-#define SYS_CLOCK 175000000
-#endif
-
-#define SYS_PRESCALE 256
-
-#define TMR_10MS_TICKS (SYS_CLOCK/SYS_PRESCALE/100)
-
-/* TIMER_CTRL_REG */
-#define TMR_PRESCALE_1 0x00
-#define TMR_PRESCALE_16 0x04
-#define TMR_PRESCALE_256 0x08
-#define TMR_MODE_PERIODIC 0x40
-#define TMR_ENABLE 0x80
-
-/* TIMER_CLR_REG */
-#define TMR_CLEAR_BIT 1
-
-
-/* Macro for access MPMC register */
-#define ADM8668_TMR_REG(base, _offset) \
- (*((volatile unsigned long *)(PA2VA(base + (_offset)))))
-
-
-/* For GPIO control */
-#define GPIO0_OUTPUT_ENABLE 0x1000
-#define GPIO1_OUTPUT_ENABLE 0x2000
-#define GPIO2_OUTPUT_ENABLE 0x4000
-#define GPIO_OUTPUT_ENABLE_ALL 0x7000
-#define GPIO0_OUTPUT_1 0x40
-#define GPIO1_OUTPUT_1 0x80
-#define GPIO2_OUTPUT_1 0x100
-#define GPIO0_INPUT_1 0x1
-#define GPIO1_INPUT_1 0x2
-#define GPIO2_INPUT_1 0x4
-
-#define GPIO_SET_HI(num) \
- ADM8668_WLAN_REG(GPIO_REG) |= (1 << (6 + num))
-
-#define GPIO_SET_LOW(num) \
- ADM8668_WLAN_REG(GPIO_REG) &= ~(1 << (6 + num))
-
-#define GPIO_TOGGLE(num) \
- ADM8668_WLAN_REG(GPIO_REG) ^= (1 << (6 + num))
-
-#define CRGPIO_SET_HI(num) \
- ADM8668_CONFIG_REG(CRGPIO_REG) |= (1 << (6 + num))
-
-#define CRGPIO_SET_LOW(num) \
- ADM8668_CONFIG_REG(CRGPIO_REG) &= ~(1 << (6 + num))
-
-#define CRGPIO_TOGGLE(num) \
- ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
-
-
-/*==========================================================================*/
-/* Cache Controller */
-#define ADM8668_CACHE_LINE_SIZE 16
-
-#define BIT_0 0x00000001
-#define BIT_1 0x00000002
-#define BIT_2 0x00000004
-#define BIT_3 0x00000008
-#define BIT_4 0x00000010
-#define BIT_5 0x00000020
-#define BIT_6 0x00000040
-#define BIT_7 0x00000080
-#define BIT_8 0x00000100
-#define BIT_9 0x00000200
-#define BIT_10 0x00000400
-#define BIT_11 0x00000800
-#define BIT_12 0x00001000
-#define BIT_13 0x00002000
-#define BIT_14 0x00004000
-#define BIT_15 0x00008000
-#define BIT_16 0x00010000
-#define BIT_17 0x00020000
-#define BIT_18 0x00040000
-#define BIT_19 0x00080000
-#define BIT_20 0x00100000
-#define BIT_21 0x00200000
-#define BIT_22 0x00400000
-#define BIT_23 0x00800000
-#define BIT_24 0x01000000
-#define BIT_25 0x02000000
-#define BIT_26 0x04000000
-#define BIT_27 0x08000000
-#define BIT_28 0x10000000
-#define BIT_29 0x20000000
-#define BIT_30 0x40000000
-#define BIT_31 0x80000000
-
-/* network regs */
-#define NETCSR0 0x0
-#define NETCSR1 0x08
-#define NETCSR2 0x10
-#define NETCSR3 0x18
-#define NETCSR4 0x20
-#define NETCSR5 0x28
+#define ADM8668_SWI_IRQ 1
+#define ADM8668_COMMS_RX_IRQ 2
+#define ADM8668_COMMS_TX_IRQ 3
+#define ADM8668_TIMER0_IRQ 4
+#define ADM8668_TIMER1_IRQ 5
+#define ADM8668_UART0_IRQ 6
+#define ADM8668_LAN_IRQ 7
+#define ADM8668_WAN_IRQ 8
+#define ADM8668_WLAN_IRQ 9
+#define ADM8668_GPIO_IRQ 10
+#define ADM8668_IDE_IRQ 11
+#define ADM8668_PCI2_IRQ 12
+#define ADM8668_PCI1_IRQ 13
+#define ADM8668_PCI0_IRQ 14
+#define ADM8668_USB_IRQ 15
+#define ADM8668_IRQ_MAX ADM8668_USB_IRQ
+
+/* register access macros */
+#define ADM8668_CONFIG_REG(_reg) \
+ (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg)))))
+
+/* lan registers */
#define NETCSR6 0x30
#define NETCSR7 0x38
-#define NETCSR8 0x40
-#define NETCSR9 0x48
-#define NETCSR10 0x50
-#define NETCSR11 0x58
-#define NETCSR12 0x60
-#define NETCSR13 0x68
-#define NETCSR14 0x70
-#define NETCSR15 0x78
-#define NETCSR36 0xD0
-#define NETCSR36A 0xD4
-#define NETCSR36B 0xD8
-#define NETCSR36C 0xDC // dummy
-#define NETCSR36D 0xE0
-#define NETCSR36E 0xE4
-#define NETCSR36F 0xE8
-#define NETCSR36G 0xEC
-#define NETCSR36H 0xF0
-#define NETCSR36I 0xF4
#define NETCSR37 0xF8
-/* for descriptor skip DWs */
-#define NETDESCSKIP_1DW BIT_2
-#define NETDESCSKIP_2DW BIT_3
-#define NETDESCSKIP_3DW (BIT_3|BIT_2)
-#define NETDESCSKIP_4DW BIT_4
+/* known/used CPU configuration registers */
+#define ADM8668_CR0 0x00
+#define ADM8668_CR1 0x04
+#define ADM8668_CR3 0x0C
+#define ADM8668_CR66 0x108
+/** For GPIO control **/
+#define GPIO_REG 0x5C /* on WLAN */
+#define CRGPIO_REG 0x20 /* on CPU */
-#define ADM8668_LAN_REG(_reg) \
- (*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg)))))
-#define ADM8668_WAN_REG(_reg) \
- (*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg)))))
+void adm8668_init_clocks(void);
#endif /* __ADM8668_H__ */
projects / openwrt.git / blobdiff