cobalt: remove 3.3 and 3.10 kernel configuration files

[openwrt.git] / target / linux / adm8668 / files / arch / mips / include / asm / mach-adm8668 / adm8668.h

diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
index 65ed0b5..8a16863 100644 (file)
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
@@ -28,30 +28,24 @@
 #define ADM8668_PCIDAT_BASE    0x12400000
 
 /* interrupt levels */
-#define INT_LVL_SWI            1
-#define INT_LVL_COMMS_RX       2
-#define INT_LVL_COMMS_TX       3
-#define INT_LVL_TIMERINT0      4
-#define INT_LVL_TIMERINT1      5
-#define INT_LVL_UART0          6
-#define INT_LVL_LAN            7
-#define INT_LVL_WAN            8
-#define INT_LVL_WLAN           9
-#define INT_LVL_GPIO           10
-#define INT_LVL_IDE            11
-#define INT_LVL_PCI2           12
-#define INT_LVL_PCI1           13
-#define INT_LVL_PCI0           14
-#define INT_LVL_USB            15
-#define INT_LVL_MAX            INT_LVL_USB
+#define ADM8668_SWI_IRQ                1
+#define ADM8668_COMMS_RX_IRQ   2
+#define ADM8668_COMMS_TX_IRQ   3
+#define ADM8668_TIMER0_IRQ     4
+#define ADM8668_TIMER1_IRQ     5
+#define ADM8668_UART0_IRQ      6
+#define ADM8668_LAN_IRQ                7
+#define ADM8668_WAN_IRQ                8
+#define ADM8668_WLAN_IRQ       9
+#define ADM8668_GPIO_IRQ       10
+#define ADM8668_IDE_IRQ                11
+#define ADM8668_PCI2_IRQ       12
+#define ADM8668_PCI1_IRQ       13
+#define ADM8668_PCI0_IRQ       14
+#define ADM8668_USB_IRQ                15
+#define ADM8668_IRQ_MAX                ADM8668_USB_IRQ
 
 /* register access macros */
-#define ADM8668_LAN_REG(_reg)          \
-       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_LAN_BASE + (_reg)))))
-#define ADM8668_WAN_REG(_reg)          \
-       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WAN_BASE + (_reg)))))
-#define ADM8668_WLAN_REG(_reg)         \
-       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WLAN_BASE + (_reg)))))
 #define ADM8668_CONFIG_REG(_reg)       \
        (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg)))))
 
@@ -69,34 +63,6 @@
 /** For GPIO control **/
 #define        GPIO_REG                0x5C    /* on WLAN */
 #define CRGPIO_REG             0x20    /* on CPU */
-#define GPIO0_OUTPUT_ENABLE    0x1000
-#define GPIO1_OUTPUT_ENABLE    0x2000
-#define GPIO2_OUTPUT_ENABLE    0x4000
-#define GPIO_OUTPUT_ENABLE_ALL 0x7000
-#define GPIO0_OUTPUT_1         0x40
-#define GPIO1_OUTPUT_1         0x80
-#define GPIO2_OUTPUT_1         0x100
-#define GPIO0_INPUT_1          0x1
-#define GPIO1_INPUT_1          0x2
-#define GPIO2_INPUT_1          0x4
-
-#define GPIO_SET_HI(num)       \
-       ADM8668_WLAN_REG(GPIO_REG) |= (1 << (6 + num))
-
-#define GPIO_SET_LOW(num)      \
-       ADM8668_WLAN_REG(GPIO_REG) &= ~(1 << (6 + num))
-
-#define GPIO_TOGGLE(num)       \
-       ADM8668_WLAN_REG(GPIO_REG) ^= (1 << (6 + num))
-
-#define CRGPIO_SET_HI(num)     \
-       ADM8668_CONFIG_REG(CRGPIO_REG) |= (1 << (6 + num))
-
-#define CRGPIO_SET_LOW(num)    \
-       ADM8668_CONFIG_REG(CRGPIO_REG) &= ~(1 << (6 + num))
-
-#define CRGPIO_TOGGLE(num)     \
-       ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
 
 void adm8668_init_clocks(void);