+--- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c
++++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
+@@ -706,6 +706,7 @@ ath5k_get_survey(struct ieee80211_hw *hw
+ survey->channel = conf->chandef.chan;
+ survey->noise = ah->ah_noise_floor;
+ survey->filled = SURVEY_INFO_NOISE_DBM |
++ SURVEY_INFO_IN_USE |
+ SURVEY_INFO_CHANNEL_TIME |
+ SURVEY_INFO_CHANNEL_TIME_BUSY |
+ SURVEY_INFO_CHANNEL_TIME_RX |
+--- a/drivers/net/wireless/ath/ath9k/recv.c
++++ b/drivers/net/wireless/ath/ath9k/recv.c
+@@ -732,11 +732,18 @@ static struct ath_rxbuf *ath_get_next_rx
+ return NULL;
+
+ /*
+- * mark descriptor as zero-length and set the 'more'
+- * flag to ensure that both buffers get discarded
++ * Re-check previous descriptor, in case it has been filled
++ * in the mean time.
+ */
+- rs->rs_datalen = 0;
+- rs->rs_more = true;
++ ret = ath9k_hw_rxprocdesc(ah, ds, rs);
++ if (ret == -EINPROGRESS) {
++ /*
++ * mark descriptor as zero-length and set the 'more'
++ * flag to ensure that both buffers get discarded
++ */
++ rs->rs_datalen = 0;
++ rs->rs_more = true;
++ }
+ }
+
+ list_del(&bf->list);
+@@ -985,32 +992,32 @@ static int ath9k_rx_skb_preprocess(struc
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ieee80211_hdr *hdr;
+ bool discard_current = sc->rx.discard_next;
+- int ret = 0;
+
+ /*
+ * Discard corrupt descriptors which are marked in
+ * ath_get_next_rx_buf().
+ */
+- sc->rx.discard_next = rx_stats->rs_more;
+ if (discard_current)
+- return -EINVAL;
++ goto corrupt;
++
++ sc->rx.discard_next = false;
+
+ /*
+ * Discard zero-length packets.
+ */
+ if (!rx_stats->rs_datalen) {
+ RX_STAT_INC(rx_len_err);
+- return -EINVAL;
++ goto corrupt;
+ }
+
+- /*
+- * rs_status follows rs_datalen so if rs_datalen is too large
+- * we can take a hint that hardware corrupted it, so ignore
+- * those frames.
+- */
++ /*
++ * rs_status follows rs_datalen so if rs_datalen is too large
++ * we can take a hint that hardware corrupted it, so ignore
++ * those frames.
++ */
+ if (rx_stats->rs_datalen > (common->rx_bufsize - ah->caps.rx_status_len)) {
+ RX_STAT_INC(rx_len_err);
+- return -EINVAL;
++ goto corrupt;
+ }
+
+ /* Only use status info from the last fragment */
+@@ -1024,10 +1031,8 @@ static int ath9k_rx_skb_preprocess(struc
+ * This is different from the other corrupt descriptor
+ * condition handled above.
+ */
+- if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (rx_stats->rs_status & ATH9K_RXERR_CORRUPT_DESC)
++ goto corrupt;
+
+ hdr = (struct ieee80211_hdr *) (skb->data + ah->caps.rx_status_len);
+
+@@ -1043,18 +1048,15 @@ static int ath9k_rx_skb_preprocess(struc
+ if (ath_process_fft(sc, hdr, rx_stats, rx_status->mactime))
+ RX_STAT_INC(rx_spectral);
+
+- ret = -EINVAL;
+- goto exit;
++ return -EINVAL;
+ }
+
+ /*
+ * everything but the rate is checked here, the rate check is done
+ * separately to avoid doing two lookups for a rate for each frame.
+ */
+- if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error)) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (!ath9k_rx_accept(common, hdr, rx_status, rx_stats, decrypt_error))
++ return -EINVAL;
+
+ if (ath_is_mybeacon(common, hdr)) {
+ RX_STAT_INC(rx_beacons);
+@@ -1064,15 +1066,11 @@ static int ath9k_rx_skb_preprocess(struc
+ /*
+ * This shouldn't happen, but have a safety check anyway.
+ */
+- if (WARN_ON(!ah->curchan)) {
+- ret = -EINVAL;
+- goto exit;
+- }
++ if (WARN_ON(!ah->curchan))
++ return -EINVAL;
+
+- if (ath9k_process_rate(common, hw, rx_stats, rx_status)) {
+- ret =-EINVAL;
+- goto exit;
+- }
++ if (ath9k_process_rate(common, hw, rx_stats, rx_status))
++ return -EINVAL;
+
+ ath9k_process_rssi(common, hw, rx_stats, rx_status);
+
+@@ -1087,9 +1085,11 @@ static int ath9k_rx_skb_preprocess(struc
+ sc->rx.num_pkts++;
+ #endif
+
+-exit:
+- sc->rx.discard_next = false;
+- return ret;
++ return 0;
++
++corrupt:
++ sc->rx.discard_next = rx_stats->rs_more;
++ return -EINVAL;
+ }
+
+ static void ath9k_rx_skb_postprocess(struct ath_common *common,
+--- a/drivers/net/wireless/ath/ath9k/ani.c
++++ b/drivers/net/wireless/ath/ath9k/ani.c
+@@ -176,16 +176,26 @@ static void ath9k_hw_set_ofdm_nil(struct
+ if (ah->opmode == NL80211_IFTYPE_STATION &&
+ BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH)
+ weak_sig = true;
+-
+ /*
+- * OFDM Weak signal detection is always enabled for AP mode.
++ * Newer chipsets are better at dealing with high PHY error counts -
++ * keep weak signal detection enabled when no RSSI threshold is
++ * available to determine if it is needed (mode != STA)
+ */
+- if (ah->opmode != NL80211_IFTYPE_AP &&
+- aniState->ofdmWeakSigDetect != weak_sig) {
+- ath9k_hw_ani_control(ah,
+- ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
+- entry_ofdm->ofdm_weak_signal_on);
+- }
++ else if (AR_SREV_9300_20_OR_LATER(ah) &&
++ ah->opmode != NL80211_IFTYPE_STATION)
++ weak_sig = true;
++
++ /* Older chipsets are more sensitive to high PHY error counts */
++ else if (!AR_SREV_9300_20_OR_LATER(ah) &&
++ aniState->ofdmNoiseImmunityLevel >= 8)
++ weak_sig = false;
++
++ if (aniState->ofdmWeakSigDetect != weak_sig)
++ ath9k_hw_ani_control(ah, ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION,
++ weak_sig);
++
++ if (!AR_SREV_9300_20_OR_LATER(ah))
++ return;
+
+ if (aniState->ofdmNoiseImmunityLevel >= ATH9K_ANI_OFDM_DEF_LEVEL) {
+ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+@@ -483,10 +493,17 @@ void ath9k_hw_ani_init(struct ath_hw *ah
+
+ ath_dbg(common, ANI, "Initialize ANI\n");
+
+- ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
+- ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
+- ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
+- ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
++ if (AR_SREV_9300_20_OR_LATER(ah)) {
++ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH;
++ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW;
++ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH;
++ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW;
++ } else {
++ ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_OLD;
++ ah->config.ofdm_trig_low = ATH9K_ANI_OFDM_TRIG_LOW_OLD;
++ ah->config.cck_trig_high = ATH9K_ANI_CCK_TRIG_HIGH_OLD;
++ ah->config.cck_trig_low = ATH9K_ANI_CCK_TRIG_LOW_OLD;
++ }
+
+ ani->spurImmunityLevel = ATH9K_ANI_SPUR_IMMUNE_LVL;
+ ani->firstepLevel = ATH9K_ANI_FIRSTEP_LVL;
+--- a/drivers/net/wireless/ath/ath9k/ani.h
++++ b/drivers/net/wireless/ath/ath9k/ani.h
+@@ -22,12 +22,16 @@
+ /* units are errors per second */
+ #define ATH9K_ANI_OFDM_TRIG_HIGH 3500
+ #define ATH9K_ANI_OFDM_TRIG_HIGH_BELOW_INI 1000
++#define ATH9K_ANI_OFDM_TRIG_HIGH_OLD 500
+
+ #define ATH9K_ANI_OFDM_TRIG_LOW 400
+ #define ATH9K_ANI_OFDM_TRIG_LOW_ABOVE_INI 900
++#define ATH9K_ANI_OFDM_TRIG_LOW_OLD 200
+
+ #define ATH9K_ANI_CCK_TRIG_HIGH 600
++#define ATH9K_ANI_CCK_TRIG_HIGH_OLD 200
+ #define ATH9K_ANI_CCK_TRIG_LOW 300
++#define ATH9K_ANI_CCK_TRIG_LOW_OLD 100
+
+ #define ATH9K_ANI_SPUR_IMMUNE_LVL 3
+ #define ATH9K_ANI_FIRSTEP_LVL 2