[package] update busybox to 1.18.4, patch from Peter Wagner

[openwrt.git] / package / busybox / config / miscutils / Config.in

diff --git a/package/busybox/config/miscutils/Config.in b/package/busybox/config/miscutils/Config.in
index d3cf407..82e48f0 100644 (file)
--- a/package/busybox/config/miscutils/Config.in
+++ b/package/busybox/config/miscutils/Config.in
@@ -8,27 +8,43 @@ menu "Miscellaneous Utilities"
 config BUSYBOX_CONFIG_CONSPY
        bool "conspy"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          A text-mode VNC like program for Linux virtual terminals.
          example:  conspy NUM      shared access to console num
          or        conspy -nd NUM  screenshot of console num
          or        conspy -cs NUM  poor man's GNU screen like
+config BUSYBOX_CONFIG_NANDWRITE
+       bool "nandwrite"
+       default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+       help
+         Write to the specified MTD device, with bad blocks awareness
 
+config BUSYBOX_CONFIG_NANDDUMP
+       bool "nanddump"
+       default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
+       help
+         Dump the content of raw NAND chip
 config BUSYBOX_CONFIG_UBIATTACH
        bool "ubiattach"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Attach MTD device to an UBI device.
 
 config BUSYBOX_CONFIG_UBIDETACH
        bool "ubidetach"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Detach MTD device from an UBI device.
 
 config BUSYBOX_CONFIG_ADJTIMEX
        bool "adjtimex"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Adjtimex reads and optionally sets adjustment parameters for
          the Linux clock adjustment algorithm.
@@ -40,9 +56,24 @@ config BUSYBOX_CONFIG_BBCONFIG
          The bbconfig applet will print the config file with which
          busybox was built.
 
+config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG
+       bool "Compress bbconfig data"
+       default n
+       depends on BUSYBOX_CONFIG_BBCONFIG
+       help
+         Store bbconfig data in compressed form, uncompress them on-the-fly
+         before output.
+
+         If you have a really tiny busybox with few applets enabled (and
+         bunzip2 isn't one of them), the overhead of the decompressor might
+         be noticeable. Also, if you run executables directly from ROM
+         and have very little memory, this might not be a win. Otherwise,
+         you probably want this.
+
 config BUSYBOX_CONFIG_BEEP
        bool "beep"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          The beep applets beeps in a given freq/Hz.
 
@@ -139,7 +170,6 @@ config BUSYBOX_CONFIG_CHRT
 config BUSYBOX_CONFIG_CROND
        bool "crond"
        default y
-       select BUSYBOX_CONFIG_FEATURE_SUID
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
          Crond is a background daemon that parses individual crontab
@@ -174,7 +204,6 @@ config BUSYBOX_CONFIG_FEATURE_CROND_DIR
 config BUSYBOX_CONFIG_CRONTAB
        bool "crontab"
        default y
-       select BUSYBOX_CONFIG_FEATURE_SUID
        help
          Crontab manipulates the crontab for a particular user. Only
          the superuser may specify a different user and/or crontab directory.
@@ -199,6 +228,7 @@ config BUSYBOX_CONFIG_FEATURE_DC_LIBM
 config BUSYBOX_CONFIG_DEVFSD
        bool "devfsd (obsolete)"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        select BUSYBOX_CONFIG_FEATURE_SYSLOG
        help
          This is deprecated and should NOT be used anymore.
@@ -242,6 +272,7 @@ config BUSYBOX_CONFIG_DEVFSD_VERBOSE
 config BUSYBOX_CONFIG_FEATURE_DEVFS
        bool "Use devfs names for all devices (obsolete)"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          This is obsolete and should NOT be used anymore.
          Use linux >= 2.6 (optionally with hotplug) and mdev instead!
@@ -261,6 +292,7 @@ config BUSYBOX_CONFIG_DEVMEM
 config BUSYBOX_CONFIG_EJECT
        bool "eject"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Used to eject cdroms. (defaults to /dev/cdrom)
 
@@ -275,6 +307,7 @@ config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI
 config BUSYBOX_CONFIG_FBSPLASH
        bool "fbsplash"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Shows splash image and progress bar on framebuffer device.
          Can be used during boot phase of an embedded device. ~2kb.
@@ -324,6 +357,7 @@ config BUSYBOX_CONFIG_FLASH_ERASEALL
 config BUSYBOX_CONFIG_IONICE
        bool "ionice"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Set/set program io scheduling class and priority
          Requires kernel >= 2.6.13
@@ -424,11 +458,12 @@ config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS
        default n
        depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD
        help
-         Enable "-N" command.
+         Enables "-N" command.
 
 config BUSYBOX_CONFIG_HDPARM
        bool "hdparm"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Get/Set hard drive parameters. Primarily intended for ATA
          drives. Adds about 13k (or around 30k if you enable the
@@ -496,15 +531,15 @@ config BUSYBOX_CONFIG_MAKEDEVS
        help
          'makedevs' is a utility used to create a batch of devices with
          one command.
-         .
+
          There are two choices for command line behaviour, the interface
          as used by LEAF/Linux Router Project, or a device table file.
-         .
+
          'leaf' is traditionally what busybox follows, it allows multiple
          devices of a particluar type to be created per command.
          e.g. /dev/hda[0-9]
          Device properties are passed as command line arguments.
-         .
+
          'table' reads device properties from a file or stdin, allowing
          a batch of unrelated devices to be made with one command.
          User/group names are allowed as an alternative to uid/gid.
@@ -551,6 +586,7 @@ config BUSYBOX_CONFIG_MT
 config BUSYBOX_CONFIG_RAIDAUTORUN
        bool "raidautorun"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          raidautorun tells the kernel md driver to
          search and start RAID arrays.
@@ -558,7 +594,7 @@ config BUSYBOX_CONFIG_RAIDAUTORUN
 config BUSYBOX_CONFIG_READAHEAD
        bool "readahead"
        default n
-       depends on BUSYBOX_CONFIG_LFS
+       depends on BUSYBOX_CONFIG_LFS && BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Preload the files listed on the command line into RAM cache so that
          subsequent reads on these files will not block on disk I/O.
@@ -575,6 +611,7 @@ config BUSYBOX_CONFIG_READAHEAD
 config BUSYBOX_CONFIG_RFKILL
        bool "rfkill"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Enable/disable wireless devices.
 
@@ -595,6 +632,7 @@ config BUSYBOX_CONFIG_RUNLEVEL
 config BUSYBOX_CONFIG_RX
        bool "rx"
        default n
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          Receive files using the Xmodem protocol.
 
@@ -666,6 +704,7 @@ config BUSYBOX_CONFIG_WALL
 config BUSYBOX_CONFIG_WATCHDOG
        bool "watchdog"
        default y
+       depends on BUSYBOX_CONFIG_PLATFORM_LINUX
        help
          The watchdog utility is used with hardware or software watchdog
          device drivers. It opens the specified watchdog device special file