default y
help
basename is used to strip the directory and suffix from filenames,
- leaving just the filename itself. Enable this option if you wish
+ leaving just the filename itself. Enable this option if you wish
to enable the 'basename' utility.
config BUSYBOX_CONFIG_CAL
default y
help
cat is used to concatenate files and print them to the standard
- output. Enable this option if you wish to enable the 'cat' utility.
+ output. Enable this option if you wish to enable the 'cat' utility.
config BUSYBOX_CONFIG_CATV
bool "catv"
help
cksum is used to calculate the CRC32 checksum of a file.
-config BUSYBOX_CONFIG_CMP
- bool "cmp"
- default n
- help
- cmp is used to compare two files and returns the result
- to standard output.
-
config BUSYBOX_CONFIG_COMM
bool "comm"
default n
print to standard error the number of records read and written
so far, then to resume copying.
- $ dd if=/dev/zero of=/dev/null& pid=$! $ kill -USR1 $pid; sleep 1; kill $pid
+ $ dd if=/dev/zero of=/dev/null&
+ $ pid=$! kill -USR1 $pid; sleep 1; kill $pid
10899206+0 records in 10899206+0 records out
config BUSYBOX_CONFIG_FEATURE_DD_IBS_OBS
df reports the amount of disk space used and available
on filesystems.
-config BUSYBOX_CONFIG_DIFF
- bool "diff"
+config BUSYBOX_CONFIG_FEATURE_DF_FANCY
+ bool "Enable -a, -i, -B"
default n
+ depends on BUSYBOX_CONFIG_DF
help
- diff compares two files or directories and outputs the
- differences between them in a form that can be given to
- the patch command.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_BINARY
- bool "Enable checks for binary files"
- default n
- depends on BUSYBOX_CONFIG_DIFF
- help
- This option enables support for checking for binary files
- before a comparison is carried out.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_DIR
- bool "Enable directory support"
- default n
- depends on BUSYBOX_CONFIG_DIFF
- help
- This option enables support for directory and subdirectory
- comparison.
-
-config BUSYBOX_CONFIG_FEATURE_DIFF_MINIMAL
- bool "Enable -d option to find smaller sets of changes"
- default n
- depends on BUSYBOX_CONFIG_DIFF
- help
- Enabling this option allows the use of -d to make diff
- try hard to find the smallest possible set of changes.
+ This option enables -a, -i and -B.
config BUSYBOX_CONFIG_DIRNAME
bool "dirname"
config BUSYBOX_CONFIG_FEATURE_FANCY_ECHO
bool "Enable echo options (-n and -e)"
default y
- depends on BUSYBOX_CONFIG_ECHO
+ depends on BUSYBOX_CONFIG_ECHO || BUSYBOX_CONFIG_ASH_BUILTIN_ECHO || BUSYBOX_CONFIG_HUSH
help
This adds options (-n and -e) to echo.
help
Support long options for the env applet.
+config BUSYBOX_CONFIG_EXPAND
+ bool "expand"
+ default n
+ help
+ By default, convert all tabs to spaces.
+
+config BUSYBOX_CONFIG_FEATURE_EXPAND_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_CONFIG_EXPAND && BUSYBOX_CONFIG_GETOPT_LONG
+ help
+ Support long options for the expand applet.
+
config BUSYBOX_CONFIG_EXPR
bool "expr"
default y
default n
depends on BUSYBOX_CONFIG_EXPR
help
- Enable 64-bit math support in the expr applet. This will make
+ Enable 64-bit math support in the expr applet. This will make
the applet slightly larger, but will allow computation with very
large numbers.
config BUSYBOX_CONFIG_NICE
bool "nice"
- default n
+ default y
help
nice runs a program with modified scheduling priority.
help
pwd is used to print the current directory.
+config BUSYBOX_CONFIG_READLINK
+ bool "readlink"
+ default n
+ help
+ This program reads a symbolic link and returns the name
+ of the file it points to
+
+config BUSYBOX_CONFIG_FEATURE_READLINK_FOLLOW
+ bool "Enable canonicalization by following all symlinks (-f)"
+ default n
+ depends on BUSYBOX_CONFIG_READLINK
+ help
+ Enable the readlink option (-f).
+
config BUSYBOX_CONFIG_REALPATH
bool "realpath"
default n
help
rmdir is used to remove empty directories.
+config BUSYBOX_CONFIG_FEATURE_RMDIR_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_CONFIG_RMDIR && BUSYBOX_CONFIG_GETOPT_LONG
+ help
+ Support long options for the rmdir applet, including
+ --ignore-fail-on-non-empty for compatibility with GNU rmdir.
+
config BUSYBOX_CONFIG_SEQ
bool "seq"
default y
help
Compute and check SHA1 message digest
+config BUSYBOX_CONFIG_SHA256SUM
+ bool "sha256sum"
+ default n
+ help
+ Compute and check SHA256 message digest
+
+config BUSYBOX_CONFIG_SHA512SUM
+ bool "sha512sum"
+ default n
+ help
+ Compute and check SHA512 message digest
+
config BUSYBOX_CONFIG_SLEEP
- bool "sleep (single integer arg with no suffix)"
+ bool "sleep"
default y
help
- sleep is used to pause for a specified number of seconds,
+ sleep is used to pause for a specified number of seconds.
+ It comes in 3 versions:
+ - small: takes one integer parameter
+ - fancy: takes multiple integer arguments with suffixes:
+ sleep 1d 2h 3m 15s
+ - fancy with fractional numbers:
+ sleep 2.3s 4.5h sleeps for 16202.3 seconds
+ Last one is "the most compatible" with coreutils sleep,
+ but it adds around 1k of code.
config BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
- bool "Enable multiple integer args and optional time suffixes"
+ bool "Enable multiple arguments and s/m/h/d suffixes"
default y
depends on BUSYBOX_CONFIG_SLEEP
help
Allow sleep to pause for specified minutes, hours, and days.
+config BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP
+ bool "Enable fractional arguments"
+ default n
+ depends on BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP
+ help
+ Allow for fractional numeric parameters.
+
config BUSYBOX_CONFIG_SORT
bool "sort"
default y
sort is used to sort lines of text in specified files.
config BUSYBOX_CONFIG_FEATURE_SORT_BIG
- bool "full SuSv3 compliant sort (Support -ktcsbdfiozgM)"
+ bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
default n
depends on BUSYBOX_CONFIG_SORT
help
- Without this, sort only supports -r, -u, and an integer version
- of -n. Selecting this adds sort keys, floating point support, and
- more. This adds a little over 3k to a nonstatic build on x86.
+ Without this, sort only supports -r, -u, and an integer version
+ of -n. Selecting this adds sort keys, floating point support, and
+ more. This adds a little over 3k to a nonstatic build on x86.
The SuSv3 sort standard is available at:
http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+config BUSYBOX_CONFIG_SPLIT
+ bool "split"
+ default n
+ help
+ split a file into pieces.
+
+config BUSYBOX_CONFIG_FEATURE_SPLIT_FANCY
+ bool "Fancy extensions"
+ default n
+ depends on BUSYBOX_CONFIG_SPLIT
+ help
+ Add support for features not required by SUSv3.
+ Supports additional suffixes 'b' for 512 bytes,
+ 'g' for 1GiB for the -b option.
+
config BUSYBOX_CONFIG_STAT
bool "stat"
default n
depends on BUSYBOX_CONFIG_STAT
help
Without this, stat will not support the '-c format' option where
- users can pass a custom format string for output. This adds about
+ users can pass a custom format string for output. This adds about
7k to a nonstatic build on amd64.
config BUSYBOX_CONFIG_STTY
help
sync is used to flush filesystem buffers.
+config BUSYBOX_CONFIG_TAC
+ bool "tac"
+ default n
+ help
+ tac is used to concatenate and print files in reverse.
+
config BUSYBOX_CONFIG_TAIL
bool "tail"
default y
to standard output and files.
config BUSYBOX_CONFIG_FEATURE_TEE_USE_BLOCK_IO
- bool "Enable block i/o (larger/faster) instead of byte i/o."
+ bool "Enable block I/O (larger/faster) instead of byte I/O"
default y
depends on BUSYBOX_CONFIG_TEE
help
default y
help
test is used to check file types and compare values,
- returning an appropriate exit code. The bash shell
+ returning an appropriate exit code. The bash shell
has test built in, ash can build it in optionally.
config BUSYBOX_CONFIG_FEATURE_TEST_64
bool "Extend test to 64 bit"
default n
- depends on BUSYBOX_CONFIG_TEST
+ depends on BUSYBOX_CONFIG_TEST || BUSYBOX_CONFIG_ASH_BUILTIN_TEST
help
Enable 64-bit support in test.
help
uname is used to print system information.
+config BUSYBOX_CONFIG_UNEXPAND
+ bool "unexpand"
+ default n
+ help
+ By default, convert only leading sequences of blanks to tabs.
+
+config BUSYBOX_CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS
+ bool "Enable long options"
+ default n
+ depends on BUSYBOX_CONFIG_UNEXPAND && BUSYBOX_CONFIG_GETOPT_LONG
+ help
+ Support long options for the unexpand applet.
+
config BUSYBOX_CONFIG_UNIQ
bool "uniq"
default y
help
uuencode is used to uuencode a file.
-config BUSYBOX_CONFIG_WATCH
- bool "watch"
- default n
- select BUSYBOX_CONFIG_DATE
- help
- watch is used to execute a program periodically, showing
- output to the screen.
-
config BUSYBOX_CONFIG_WC
bool "wc"
default y
default n
depends on BUSYBOX_CONFIG_WC
help
- Use "unsigned long long" in wc for count variables
+ Use "unsigned long long" in wc for counter variables.
config BUSYBOX_CONFIG_WHO
bool "who"
projects / openwrt.git / blobdiff